Abstract:A novel plasma-driven catalysis (PDC) reactor with special structure was proposed to remove vehicle exhaust gas. The PDC reactor which consisted of three quartz tubes and two copper electrodes was a coaxial dielectric barrier discharge (DBD) reactor. The inner and outer electrodes firmly surrounded the outer surface of the corresponding dielectric barrier layer in a spiral way, respectively. Nano-titanium dioxide (TiO2) film prepared by radiofrequency (RF) magnetron sputtering was coated on the outer wall of the middle quartz tube, separating the catalyst from the high voltage electrode. The spiral electrodes were designed to avoid overheating of microdischarges inside the PDC reactor. Continuous operation tests indicated that stable performance without deterioration of catalytic activity could last for more than 25 h. To verify the effectiveness of the PDC reactor, a non-thermal plasma(NTP) reactor was employed, which has the same structure as the PDC reactor but without the catalyst. The real vehicle exhaust gas was introduced into the PDC reactor and NTP reactor, respectively. After the treatment, compared with the result from NTP, the concentration of HC in the vehicle exhaust gas treated by PDC reactor reduced far more obviously while that of NO decreased only a little. Moreover, this result was explained through optical emission spectrum. The O emission lines can be observed between 870 nm and 960 nm for wavelength in PDC reactor. Together with previous studies, it could be hypothesized that O derived from catalytically O-3 destruction by catalyst might make a significant contribution to the much higher HC removal efficiency by PDC reactor. A series of complex chemical reactions caused by the multi-components mixture in real vehicle exhaust reduced NO removal efficiency. A controllable system with a real-time feedback module for the PDC reactor was proposed to further improve the ability of removing real vehicle exhaust gas.

DC microdischarges inside porous ceramics

Electrical and Optical Properties of AC Microdischarges in Porous Ceramics

Non-thermal Plasma Generation by Using Back Corona Discharge on Catalyst

Characteristics of Porous Ceramics Dielectric Barrier Discharge in Methane at Atmospheric Pressure

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Characteristics of Back Corona Discharge in a Honeycomb Catalyst and Its Application for Treatment of Volatile Organic Compounds.

Numerical investigation on the discharge formation in micrometer pores in structured catalyst irradiated by a helium atmospheric pressure plasma jet

Vehicle Exhaust Gas Clearance By Low Temperature Plasma-Driven Nano-Titanium Dioxide Film Prepared By Radiofrequency Magnetron Sputtering

A Review of Recent Advances of Dielectric Barrier Discharge Plasma in Catalysis

Damage-Free Removal of Residual Carbon in a Dielectric Barrier Discharge (DBD) Plasma for Carbothermal-Synthesized Materials

The investigation of synergistic interactions between CO 2 plasma and porous catalysts through 2-D fluid modeling

Plasma discharge catalyzing nano-TiO 2

Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis

Outside Front Cover: Plasma Process. Polym. 1/2024

The impact of catalyst structure and loading material on the dynamics of plasma propagation in dielectric barrier discharges

Enhancement of Flue Gas Low-Concentration Toluene Removal in Pulsed Plasma Coupling with Porous Ceramic Modified Catalyst Reactor

Degradation of chlorinated volatile organic compounds in waste gas by catalytic plasma system

Low temperature plasma-driven catalysis of nanotitanium dioxide for vehicle exhaust clearance

The CO2 Conversion in a DBD Plasma: A 1D Synergistic Catalysis Model

Recent applications in dielectric barrier discharge and radio frequency plasmas‐engineered transition metal electrocatalysts for water splitting

A two dielectric barrier discharge devices for exhaust -gas treatment has a catalytic coating