Abstract:Obtaining a perovskite light-absorbing layer with good crystallization, low defect concentration, good stability, and well-matched energy levels is critical to obtaining high-efficiency perovskite solar cells (PSCs). Here, a hybrid PSC with a graded band gap is explored using MAPbBr3 (MA = CH3NH3) and MAPbBr0.9I2.1 quantum dots (QDs) as component cells. We have creatively designed a solar cell device with a double-QD structure [indium tin oxide (ITO)/SnO2/perovskite:MAPbBr3 QDs/MAPbBr0.9I2.1 QDs/Spiro-OMeTAD/Au]. A better crystal film of the perovskite absorption layer can be obtained because the MAPbBr3 QDs are doped in an antisolvent, which induces nucleation and growth in the polycrystalline perovskite. In addition, we expect that digestive ripening occurred in the crystallization, and the oleic acid ligands on the surface of the QDs disintegrate during the doping process and transfer to the surface of the perovskite absorption layer finally; it follows that the hydrophobicity and stability of the perovskite film are greatly enhanced. Moreover, a thin film of MAPbBr0.9I2.1 QDs is introduced between the perovskite absorption layer and the hole layer, acting as an energy-level ladder, which leads to well-matched energy levels, an increase in fill factor (FF), and an enhanced hole transport capability. In particular, the mechanism of the crystallization process involving the effect of oleic acid ligands on the interior and surface of the perovskite film is fully discussed here. The final research results from the PSCs show that both high efficiency and long-term stability are achieved successfully by this design strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14191?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14191</a>.Parameters of carrier lifetimes in TRPL, parameters and calculated values in the Owens two-liquid method experiment, and J–V parameters; QD dispersion images; AFM images; perovskite film images; contact-angle test images; EIS spectrum; and boxplot of J–V parameters (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14191/suppl_file/am0c14191_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cost‐Effective Synthesis Method: Toxic Solvent‐Free Approach for Stable Mixed Cation Perovskite Powders in Photovoltaic Applications

Mechanochemical synthesis of pure phase mixed-cation/anion (FAPbI<sub>3</sub>)<sub><i>x</i></sub>(MAPbBr<sub>3</sub>)<sub>1-<i>x</i ></sub> hybrid perovskite materials: compositional engineering and photovoltaic performance

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Advances in cesium lead iodide perovskite solar cells: Processing science matters

Inorganic CsPbBr<sub>3</sub> Perovskite Nanocrystals as Interfacial Ion Reservoirs to Stabilize FAPbI<sub>3</sub> Perovskite for Efficient Photovoltaics

Mixed Cation Perovskite Solar Cells by Stack-Sequence Chemical Vapor Deposition with Self-Passivation and Gradient Absorption Layer

Mechanochemistry Advances High‐Performance Perovskite Solar Cells

Optimizing Methylammonium Lead Iodide Perovskite Synthesis for Solar Cells via Two-step Spin Coating with Mixed Solvents

A Facile Solvent Strategy Enables Morphology Controllable Perovskite Films for CsPbBr3 Perovskite Solar Cells

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Aqueously synthesized δ-phase FAPbI3 for efficient perovskite solar cells

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Stable and Efficient Methylammonium‐, Cesium‐, and Bromide‐Free Perovskite Solar Cells by In‐Situ Interlayer Formation

Aqueous Synthesis of Α-Csx FA1-x PbI3 Microcrystals for Efficient Perovskite Solar Cells

Reactive Inhibition Strategy for Triple‐cation Mixed‐halide Perovskite Ink with Prolonged Shelf‐life

Triple-cation mixed-halide perovskites: towards efficient, annealing-free and air-stable solar cells enabled by Pb(SCN)2 additive

Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions

A Stepwise Melting‐Polymerizing Molecule for Hydrophobic Grain‐Scale Encapsulated Perovskite Solar Cell

Mediator–Antisolvent Strategy to Stabilize All-Inorganic CsPbI3 for Perovskite Solar Cells with Efficiency Exceeding 16%

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells