Abstract:Purpose This paper aims to elucidate the effects of lubricant groove shape, vertical load, swing angle and grease injection cycle on the friction and wear performances of journal bearings under the grease lubrication condition. Design/methodology/approach Three different types of lubricant grooves, namely, numeral eight-shaped, axial straight line-shaped and circular blind hole-shaped, were designed and machined in the bearing bush of journal bearings. The tribological behaviors of these journal bearings were investigated on the self-developed reciprocating swing friction and wear tester. Experimental data including the friction coefficient, the friction temperature, the wear loss and wear time were analyzed in detail. The wear morphologies of friction pairs were observed by scanning electron microscope and confocal laser scanning microscope. Findings The load carrying capacity and service life of the journal bearing with circular blind hole-shaped lubricant grooves are not affected. However, the load carrying capacities of journal bearings with numeral eight-shaped and axial straight line-shaped lubricant grooves are declined. The coverage areas of lubricating grease in the bearing bush are associated with the swing angle. The smaller the swing angle is, the more limited the coverage areas of lubricating grease get. Among these journal bearings, the maintenance-free time of journal bearing with circular blind hole-shaped lubricant grooves is the longest because of its large grease storage capacity. Originality/value The journal bearing with circular blind hole-shaped lubricant grooves exhibits the excellent antifriction and wear-resistant properties, making it suitable for the application in the low-speed and heavy-load engineering conditions.

Scratch geometry effects on lubrication and performance of two-lobe journal bearings: A detailed study

The Influence of Scratches on the Tribological Performance of Friction Pairs Made of Different Materials under Water-Lubrication Conditions

Influence of shaft scratch on static and transient behavior of water-lubricated bearing

Combined Effects of Rarefaction and Fractal Roughness on the Performance of Ultra-Thin Gas Film Journal Bearings

Interactive Effects Of Rarefaction And Surface Roughness On Aerodynamic Lubrication Of Microbearings

Effect of texture shapes and additives in lubricants on the dynamic characteristics of the hydrodynamic journal bearing

Scratch Damage on Guiding Surfaces of High-Speed Bearings under Oil Cut-off Condition

A Numerical Model with Nonuniform Grids for the Analysis of Dynamic Characteristics of Scratched Tilting-Pad Bearings

Numerical simulation of the dynamic fluid–solid coupling in journal bearing with the effect of surface topography in consideration

Effect of Boundary Conditions on the Performances of Gas-Lubricated Micro Journal Bearing

Influence of Slip Effect on Viscous Dissipation Heat and Lubrication Characteristics of Gas Journal Bearing: A Multiscale Analysis

Boundary slip surface design for high speed water lubricated journal bearings

Effects of Journal Roundness Phase and Amplitude on Lubrication of Engine Bearings with Consideration of Straightness

Numerical analysis of turbulence effect for coupled journal-thrust water-lubricated bearing with micro grooves

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

The influences of lubricant groove shape on the tribological properties of journal bearing under the grease lubrication conditions

Effects of Texture Slip Surface on Load-Carrying Capacity and Cavitation of Bearing

Study of grease lubricated journal bearing with partial surface texture

Modeling a Hydrodynamic Bearing with Provision for Misalignments and Textures

Effects of Random Surface Roughness on Properties of Gas-Lubricated Journal Bearing in MEMS

Analytical and Experimental Investigation of Vibration Characteristics Induced by Tribofilm-Asperity Interactions in Hydrodynamic Journal Bearings