Abstract:Ice formation on structures like wind turbine blade airfoils significantly reduces their aerodynamic efficiency. The presence of ice on airfoils causes deformation in their geometry and an increase in their surface roughness, enhancing turbulence, particularly on the suction side of the airfoil at high angles of attack. An approach for understanding this phenomenon and assessing its impact on wind turbine operation is modeling and simulation. In this contribution, a computational fluid dynamics (CFD) study is conducted using FENSAP-ICE 2022 R1 software available in the ANSYS package. The objective was to evaluate the influence of surface roughness modeling (Shin et al. and beading models) in combination with different turbulence models (Spalart–Allmaras and k-ω shear stress transport) on the estimation of the aerodynamic performance losses of wind turbine airfoils not only under rime ice conditions but also considering the less studied case of glaze ice. Moreover, the behavior of the commonly less explored pressure and skin friction coefficients is examined in the clean and iced airfoil scenarios. As a result, the iced profile experiences higher drag and lower lift than in the no-ice conditions, which is explained by modifying skin friction and pressure coefficients by ice. Overall, the outcomes of both turbulence models are similar, showing maximum differences not higher than 10% in the simulations for both ice regimes. However, it is demonstrated that the influence of blade roughness was critical and cannot be disregarded in ice accretion simulations on wind turbine blades. In this context, the beading model has demonstrated an excellent ability to manage changes in roughness throughout the ice accretion process. On the other hand, the widely used roughness model of Shin et al. could underestimate the lift and overestimate the drag coefficients of the wind turbine airfoil in icy conditions.

Ice accretion simulation incorporating roughness effects and separation correction through a transition model

Aerodynamic prediction and roughness implementation toward ice accretion simulation

Roughness Implementation and Convective Heat Transfer Coefficient Computation Toward Ice Accretion Simulation

Numerical Simulation of Iced Wing Using Separating Shear Layer Fixed Turbulence Models

Influence of Air Flow Field Computation on an Ice Accretion Simulation of Airfoils

Effects of Surface Roughness on Splashing Characteristics of Large Droplets with Digital Inline Holographic Imaging

Aircraft Icing Model Considering Both Rime Ice Property Variability and Runback Water Effect

Model for Aircraft Icing with Consideration of Property-Variable Rime Ice

Numerical Simulation of Ice Crystal Supercooled Droplet Mixed Phase Icing Based on the Improved Messinger Model

A New Ice Accretion Model for Aircraft Icing Based on Phase-Field Method

Aerodynamic Prediction of Iced Airfoils Based on Modified Three-Equation Turbulence Model

Finite volume based film flow and ice accretion models on aircraft wings

Numerical Simulation of Ice Accretion on Wings and Flow Field Analysis

Numerical Simulations of Hybrid Laminar Flow Control by Suction over an Airfoil

Modelling and analysis of initial icing roughness with fixed-grid enthalpy method based on DPM-VOF algorithm

Numerical Investigation of Ice Accretion Effects at Supercooled Large Droplet Conditions

Influence of Surface Roughness Modeling on the Aerodynamics of an Iced Wind Turbine S809 Airfoil

Numerical Simulation of Water Film Flow and Breakup on Anti-Icing Surface

Numerical simulation for in-cloud icing of three-dimensional wind turbine blades

A Numerical Study of Droplet Impingement for In-Flight Ice Accretion Prediction

Surface Roughness in RANS Applied to Aircraft Ice Accretion Simulation: A Review