Abstract:For the optical system of the telescope, with the increase in telescope size, the manufacture of monolithic primary becomes increasingly difficult. Instead, the use of segmented mirrors, where many individual mirrors (the segments) work together to provide an image quality and an aperture equivalent to that of a large monolithic mirror, is considered a more appropriate strategy. But with the introduction of the large telescope mirror comprised of many individual segments, the problem of insuring a smooth continuous mirror surface (co-phased mirrors) becomes critical. One of the main problems is the measurement of the vertical displacement between the individual segments (piston error), for such mirrors, the segment vertical misalignment (piston error) between the segments must be reduced to a small fraction of the wavelength (<100nm) of the incoming light. The measurements become especially complicated when the piston error is in order of wavelength fractions. To meet the performance capabilities, a novel method for phasing the segmented mirrors optics system is described. The phasing method is based on a high-aperture Michelson interferometer. The use of an interferometric technique allows the measuring of segment misalignment during the daytime with high accuracy, which is a major design guideline. The innovation introduced in the optical design of the interferometer is the simultaneous use of monochromatic light and multiwavelength combination white-light source in a direct method for improving the central fringe identification in the white-light interferometric phasing system. With theoretic analysis, we find that this multiwavelength combination technique can greatly increase the visibility difference between the central fringe and its adjacent side fringes, and thus it offers an increased signal resolution. So make the central fringe identification become easier, and enhance the measure precision of the segment phasing error. Consequently, it is suitable for high-precision measurement purpose and application in the segment piston error phasing system. The description about the expected interferograms and the feasibility of the phasing method are presented here.

Wide-band white light sparse-aperture Fizeau imaging interferometer testbed for a distributed small-satellites constellation

The Fizeau Interferometer Testbed

Self-calibration of Fizeau interferometer and planar scale gratings in Littrow setup.

Fresnel Interferometric Imager: ground-based prototype

Demonstration of a Fizeau Directly-Imaging Sparse-Aperture Telescope with Pointing and Tracking Capabilities

Design of CCD Test Platform of Scientific Imaging for Wide Field Survey Telescope

Far-Infrared Interferometric Telescope Experiment: Optical Adjustment System

Computational Diffraction-Limited Imaging with a Non-Imaging Spatial Information Transfer Lens

An angle-scanned cryogenic Fabry-Pérot interferometer for far-infrared astronomy

Checkerboard Constellation High-Resolution Imaging Method for Earth Observation Based on Optical Pupil Plane Interferometry and Phase Retrieval Algorithms

Development of super broadband interferometer in FIR

A Simple High-Precision Wide-Spectrum Interferometric System.

Wide field interferometric imaging with single-mode fibers

High-Resolution Imaging Techniques Based On Optical Synthetic Aperture - Art. No. 672103

Realizing 3D Spectral Imaging in the Far-Infrared: FIFI LS

WFST Primary Mosaic CCD Camera and Its First Light

Optical design of the freeform reflective imaging system with wide rectangular FOV and low F-number

Optical design of a high-resolution spectrometer with a wide field of view

Application of A White-Light Interferometric Measuring System As Co-Phasing the Segmented Primary Mirrors of the High-Aperture Telescope

Design of a Compact Off-Axis Two-Mirror Freeform Infrared Imager with a Wide Field of View

Imaging swiFTly: streaming widefield Fourier Transforms for large-scale interferometry