Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

Multifunctional Superelastic Graphene-Based Thermoelectric Sponges for Wearable and Thermal Management Devices

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Persistently Self-Powered Wearable Thermoelectric Generator Enabled by Phase-Change Inorganics As the Heat Sink

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Ultralight Heat-Insulating, Electrically Conductive Carbon Fibrous Sponges for Wearable Mechanosensing Devices with Advanced Warming Function

High‐performance Stretchable Organic Thermoelectric Generator via Rational Thermal Interface Design for Wearable Electronics

Optimized thermal design for excellent wearable thermoelectric generator

Flexible Thermoelectric Foil for Wearable Energy Harvesting

Scalable manufacturing durable, tailorable and recyclable multifunctional woven thermoelectric textile system

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator

High‐Performance Stretchable Thermoelectric Generator for Self‐Powered Wearable Electronics

Recyclable, Healable, and Stretchable High‐Power Thermoelectric Generator

Scalable fabrication of flexible thermoelectric generator with non-toxic Ga:ZnO and PEDOT:PSS thermoelements for wearable energy harvesting

All-Solution-Processed Polythiophene/Carbon Nanotube Nanocomposites Integrated on Biocompatible Silk Fibroin Substrates for Wearable Thermoelectric Generators

Integrating Dual Heat Sources to Enhance Thermoelectric Generator Power Output

Defect-engineered Reduced Graphene Oxide Sheets with High Electric Conductivity and Controlled Thermal Conductivity for Soft and Flexible Wearable Thermoelectric Generators

A Cross‐Plane Design for Wearable Thermoelectric Generators with High Stretchability and Output Performance

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation

Whole Fabric‐Assisted Thermoelectric Devices for Wearable Electronics

Mixed Ionic-Electronic Conducting Hydrogels with Carboxylated Carbon Nanotubes for High Performance Wearable Thermoelectric Harvesters