Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

A Cross‐Plane Design for Wearable Thermoelectric Generators with High Stretchability and Output Performance

A Wavy-Structured Highly Stretchable Thermoelectric Generator with Stable Energy Output and Self-Rescuing Capability

High‐Performance Stretchable Thermoelectric Generator for Self‐Powered Wearable Electronics

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Highly Stretchable Thermoelectric Generator Integrated from Polyaniline-based Nanocomposites for Body Heat Harvesting

Initiating a Stretchable, Compressible, and Wearable Thermoelectric Generator by a Spiral Architecture with Ternary Nanocomposites for Efficient Heat Harvesting

High‐performance Stretchable Organic Thermoelectric Generator via Rational Thermal Interface Design for Wearable Electronics

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer

Partially Air‐Filled Skin‐Attachable Deformable Gasket with Negative Poisson's Ratio for Highly‐Efficient Stretchable Thermoelectric Generators

Recyclable, Healable, and Stretchable High‐Power Thermoelectric Generator

Whole Fabric‐Assisted Thermoelectric Devices for Wearable Electronics

Stretchable Thermoelectric Generators Based on Bulk Bi2Te3 and Liquid Metals

Optimized thermal design for excellent wearable thermoelectric generator

Novel Thermoelectric Fabric Structure with Switched Thermal Gradient Direction toward Wearable In‐Plane Thermoelectric Generators

Stretchable Nanolayered Thermoelectric Energy Harvester on Complex and Dynamic Surfaces.

High-Power-Density Wearable Thermoelectric Generators for Human Body Heat Harvesting

Flexible micro thermoelectric generators with high power density and light weight

Scalable fabrication of flexible thermoelectric generator with non-toxic Ga:ZnO and PEDOT:PSS thermoelements for wearable energy harvesting

Printing Liquid Metal Elastomer Composites for High‐Performance Stretchable Thermoelectric Generators

Kirigami-Based Stretchable, Deformable, Ultralight Thin-Film Thermoelectric Generator for BodyNET Application