Abstract:Chinese herb residue waste, characterized by its high moisture content and concentrated emissions, shares a similar chemical constitution with common lignocellulosic biomass. Therefore, it can be effectively converted into biofuel through hydrothermal liquefaction. In this study, the impact of temperature (300-360 °C), reaction time (0-60 min), and solid-liquid ratio (1:5/1:10/1:15) on the distribution of Chinese herb residue conversion products was investigated. The highest HHV achieved was 25.964 MJ/kg with a bio-oil yield of 24.57 wt.% under the experimental conditions of temperature at 330 °C for 15 min and a solid-liquid ratio of 1:10. A series of metal-loaded catalysts, Fe/MCM-41, Ni/MCM-41, and Co/MCM-41, were prepared by the impregnation method for the catalytic hydrothermal liquefaction of Chinese herb residue, and the bio-oil products were analyzed by EA, GC-MS and FT-IR. Higher bio-oil yields were obtained for the monometallic catalysts, Fe/MCM-41 (26.15 wt.%), Ni/MCM-41 (26.2 wt.%), and Co/MCM-41 (27.05 wt.%), respectively. The bimetallic catalysts showed the highest conversion of Fe-Ni/MCM-41 (84.7%) > Fe/MCM-41 (82.9%) > Fe-Co/MCM-41 (82.1%), respectively. The highest HHV of 32 MJ/kg was achieved using Ni/MCM-41 catalyst. GC-MS analysis revealed that the major constituents of bio-oil included phenols, ketones, acids, and esters. The bio-oil obtained using Fe/MCM-41 catalyst exhibited the highest relative contents of phenols and ketones at 44.13% and 24.5%. These findings demonstrate that temperature and catalyst selection play crucial roles in influencing the yield of bio-oil, as well as its chemical composition. Furthermore, the deoxidation and hydrogenation reactions were significantly enhanced by the transition metal-supported molecular sieve catalyst, leading to a notable increase in the HHV.

Ethanol-Assisted Hydrothermal Liquefaction of Poplar Using Fe-Co/Al2O3 as Catalyst

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Promoting the conversion of poplar to bio-oil based on the synergistic effect of alkaline hydrogen peroxide

Comprehensive characterization of hydrothermal liquefaction products obtained from woody biomass under various alkali catalyst concentrations

Catalytic fast co-pyrolysis of Douglas Fir and low-density polyethylene with nanocellulose-derived carbon catalyst for enhancing selectivity of hydrogen in syngas and mono-aromatic hydrocarbon in bio-oil products

Catalytic hydrothermal liquefaction of alkali lignin over activated bio-char supported bimetallic catalyst

Efficient and stable Fe-Ce-Al catalyst for catalytic deoxygenation of lignin for phenol and hydrocarbon-rich fuel: Effect of the synthesis method

Effect of Fe, Ni, and Co on the hydrothermal liquefaction of Chinese herb residue for bio-oil production

Catalytic pyrolysis of poplar wood over transition metal oxides: Correlation of catalytic behaviors with physiochemical properties of the oxides

Catalytic Co-Conversion of Poplar Pyrolysis Vapor and Methanol for Aromatics Production Via Ex-Situ Configuration

Adsorption–Activation Bifunctional Center of Al/Co‐Base Catalyst for Boosting 5‐Hydroxymethylfurfural Oxidation

Selective Catalytic Transfer Hydrogenation of Lignin to Alkyl Guaiacols Over NiMo/Al-MCM-41

Catalytic Alcoholysis of Lignin with HY and ZSM-5 Zeolite Catalysts

Effect of H-ZSM-5 and Al-MCM-41 Proportions in Catalyst Mixtures on the Composition of Bio-Oil in Ex-Situ Catalytic Pyrolysis of Lignocellulose Biomass

A unique Co@CoO catalyst for hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

Alloying Cobalt in Co-Fe-Al Catalyst for Achieving the Selective Conversion of Furfural to Cyclopentanone

Efficient one-pot transformation of furfural to pentanediol over Cu-modified cobalt-based catalysts

One-step hydrogenation-esterification of furfural and acetic acid over bifunctional Pd catalysts for bio-oil upgrading.

Fe-Assisted Hydrothermal Liquefaction of Lignocellulosic Biomass for Producing High-Grade Bio-Oil

Hydrodeoxygenation of Oxygenates Derived from Biomass Pyrolysis Using Titanium Dioxide-Supported Cobalt Catalysts

Lignin-MOF hybrid polymetallic composites for selective hydrogenolysis of cellulose derived 5-hydroxymethylfurfural