Abstract:Building-integrated photovoltaic (BIPV) technology shows a promising future in high-density cities given its potential to fully utilise the limited floor space for renewable energy generation. This study proposes a transient heat transfer model of a Cadmium Telluride semi-transparent PV glazing (CdTe SPVG) to analyze its heat transfer process validated by field experiment. The dynamic experiment also tests the thermal-daylight-electrical performance of the CdTe SPVG comparing with conventional insulated glazing unit (IGU) on a testing building. The simulation model is established based on the experiment to explore the annual energy performance of the CdTe SPVG applied in a practical high-rise office building in the Greater Bay Area comparing with the single glazing (SG), IGU and CdTe semi-transparent PV vacuum glazing (SPVVG). The experimental results show that the dynamic solar heat gain coefficient of the CdTe SPVG is about 0.32∼0.54 lower than the IGU at about 0.46∼0.67. The CdTe SPVG reduces an average of 18% indoor heat gain compared to the IGU during the testing period. The U-value of the CdTe SPVG ranges from 4.10∼5.38 W/(m 2 ·K) compared with the IGU ranging from 2.44∼2.91 W/(m 2 ·K). The CdTe SPVG ensures the indoor daylight illuminance over 450 lux with a useful daylight illuminance rate of about 98%, and its maximum daily power generation is 106 Wh (1.16 Wh/Wp). The simulation results of four different glazings show that the annual building energy consumption using the SG is about 116 kWh/m 2 , while it is obviously reduced using the IGU (-2.16%), CdTe SPVG (-6.52%) and CdTe SPVVG (-12.51%). The annual power generation of the CdTe SPVG is about 894.73 MWh (0.64 kWh/Wp) equivalent to about 421.87 tons CO 2 , which accounts for about 15.81% of the annual building energy consumption. This comprehensive study reporting the transient heat transfer process, dynamic experimental performance and annual building energy consumption of the CdTe SPVG can provide theoretical basis to the development of BIPV in the Greater Bay Area. The developed theoretical-experimental-simulation models can also be applied in other regions to access the pathway towards zero energy and zero carbon of the building sector.

Numerical study on comprehensive energy-saving potential of BIPV façade under useful energy utilization for high-rise office buildings in various climatic zones of China

Multi-objective Optimization of the Office Park Building Envelope with the Goal of Nearly Zero Energy Consumption

Energy Efficiency Optimization Strategies for University Research Buildings with Hot Summer and Cold Winter Climate of China Based on the Adaptive Thermal Comfort

Energy-Saving Potential Comparison of Different Photovoltaic Integrated Shading Devices (PVSDs) for Single-Story and Multi-Story Buildings

Lighting Performance in Office Buildings with Bipv Facades: Visual and Non-Visual Effects

Theoretical-experimental-simulation research on thermal-daylight-electrical performance of PV glazing in high-rise office building in the Greater Bay Area

Analyzing the effectiveness of building integrated Photovoltaics (BIPV) to reduce the energy consumption in Dubai

An Analysis of Real-Time Measured Solar Radiation and Daylight and Its Energy Implications for Semi-Transparent Building-Integrated Photovoltaic Façades

A New Dynamic and Vertical Photovoltaic Integrated Building Envelope for High-Rise Glaze-Facade Buildings

Energy performance of an innovative bifacial photovoltaic sunshade (BiPVS) under hot summer and warm winter climate

Effect of Semi-Transparent A-Si Pv Glazing within Double-Skin Façades on Visual and Energy Performances Under the UK Climate Condition

Global Estimation of Building-Integrated Facade and Rooftop Photovoltaic Potential by Integrating 3D Building Footprint and Spatio-Temporal Datasets

A Comparative Study on the Performance of BIPV and Mainstream Insulation Materials for the Energy-Efficient Renovation of Existing Residential Buildings in China

Energy and Daylighting Performance of Kinetic Building-Integrated Photovoltaics (BIPV) Façade

Comprehensive Energy Efficiency Study of Different Climate -Adapted BIPV Roof Forms in Single-Family Houses for Five Climate Zones of China Based on PV Energy Substitution Rates (PVESR)

Understanding BIPV performance with respect to WWR for energy efficient buildings

Optimization of Design Parameters for Office Buildings with Climatic Adaptability Based on Energy Demand and Thermal Comfort

Optimization of exterior wall insulation in office buildings based on wall orientation: Economic, energy and carbon saving potential in China

Solar Energy Utilization Potential in Urban Residential Blocks: A Case Study of Wuhan, China

Energy Performance Analysis and Study of an Office Building in an Extremely Hot and Cold Region

Building energy consumption analysis and measures: a case study from an administration building in Chengdu, China