Abstract:Building-integrated photovoltaic (BIPV) technology shows a promising future in high-density cities given its potential to fully utilise the limited floor space for renewable energy generation. This study proposes a transient heat transfer model of a Cadmium Telluride semi-transparent PV glazing (CdTe SPVG) to analyze its heat transfer process validated by field experiment. The dynamic experiment also tests the thermal-daylight-electrical performance of the CdTe SPVG comparing with conventional insulated glazing unit (IGU) on a testing building. The simulation model is established based on the experiment to explore the annual energy performance of the CdTe SPVG applied in a practical high-rise office building in the Greater Bay Area comparing with the single glazing (SG), IGU and CdTe semi-transparent PV vacuum glazing (SPVVG). The experimental results show that the dynamic solar heat gain coefficient of the CdTe SPVG is about 0.32∼0.54 lower than the IGU at about 0.46∼0.67. The CdTe SPVG reduces an average of 18% indoor heat gain compared to the IGU during the testing period. The U-value of the CdTe SPVG ranges from 4.10∼5.38 W/(m 2 ·K) compared with the IGU ranging from 2.44∼2.91 W/(m 2 ·K). The CdTe SPVG ensures the indoor daylight illuminance over 450 lux with a useful daylight illuminance rate of about 98%, and its maximum daily power generation is 106 Wh (1.16 Wh/Wp). The simulation results of four different glazings show that the annual building energy consumption using the SG is about 116 kWh/m 2 , while it is obviously reduced using the IGU (-2.16%), CdTe SPVG (-6.52%) and CdTe SPVVG (-12.51%). The annual power generation of the CdTe SPVG is about 894.73 MWh (0.64 kWh/Wp) equivalent to about 421.87 tons CO 2 , which accounts for about 15.81% of the annual building energy consumption. This comprehensive study reporting the transient heat transfer process, dynamic experimental performance and annual building energy consumption of the CdTe SPVG can provide theoretical basis to the development of BIPV in the Greater Bay Area. The developed theoretical-experimental-simulation models can also be applied in other regions to access the pathway towards zero energy and zero carbon of the building sector.

Lighting Performance in Office Buildings with Bipv Facades: Visual and Non-Visual Effects

Effect of Semi-Transparent A-Si Pv Glazing within Double-Skin Façades on Visual and Energy Performances Under the UK Climate Condition

A Simulation-Aided Approach in Examining the Viability of Passive Daylighting Techniques on Inclined Windows

Energy and Daylighting Performance of Kinetic Building-Integrated Photovoltaics (BIPV) Façade

An Analysis of Real-Time Measured Solar Radiation and Daylight and Its Energy Implications for Semi-Transparent Building-Integrated Photovoltaic Façades

Numerical study on comprehensive energy-saving potential of BIPV façade under useful energy utilization for high-rise office buildings in various climatic zones of China

Energy-Saving Potential Comparison of Different Photovoltaic Integrated Shading Devices (PVSDs) for Single-Story and Multi-Story Buildings

Daylight in Buildings and Visual Comfort Evaluation: the Advantages and Limitations

Simulation of a novel curved photovoltaic (PV) window improving the annual daylighting and building energy performance simultaneously

Optimization of Daylight and Thermal Performance of Building Facade: A Case Study of Office Buildings in Nanjing

Improving Building Facade Design Using Integrated Simulation of Daylighting, Thermal Performance and Natural Ventilation

Theoretical-experimental-simulation research on thermal-daylight-electrical performance of PV glazing in high-rise office building in the Greater Bay Area

The impact of facade geometry on visual comfort and energy consumption in an office building in different climates

Understanding BIPV performance with respect to WWR for energy efficient buildings

Optimized Lighting Energy Consumption for Non-Visual Effects: A Case Study in Office Spaces Based on Field Test and Simulation

Evaluation and Design of Parameterized Dynamic Daylighting for Large-Space Buildings

A New Dynamic and Vertical Photovoltaic Integrated Building Envelope for High-Rise Glaze-Facade Buildings

Simulating Physiological Potentials of Daylight Variables in Lighting Design

Coupled evaluation of the optical-thermal-electrical performance of customized building-integrated photovoltaic components

Studying the Impact of Colored Glazing Systems on Visual and Non-Visual Performances in a Daylit Office

Integrated Dynamic Photovoltaic Facade for Enhanced Building Comfort and Energy Efficiency