Abstract:In this work, to simultaneously meet the requirements of good electrochemical performance and redox stability, perovskite oxide Pr0.4Sr0.6Fe0.875Mo0.125O3-δ (PSFM) material has been developed as a novel redox-stable electrode for symmetrical cell application. The experimental results obtained by X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy show that metallic Fe nanoparticles will exsolve from the parent oxide PSFM through in-situ exsolution method when treating in 97% H2–3% H2O atmosphere, and then completely re-incorporate into the parent oxide in air, demonstrating excellent redox stability for PSFM material. In addition, the redox stability in electrochemical performance is also studied by recording the electrochemical impedance spectra and distribution of relaxation times (DRT) analysis. It is demonstrated that a constant electrode polarization resistance (Rp) of ~0.60 Ωcm2 is achieved for the symmetrical cell with PSFM electrode in air at 800 °C after activation, and Rp value is significantly increased to 1.59 Ωcm2 when exposing the symmetrical cell to 97% H2–3% H2O, which is possibly ascribed to the significantly decreased electrical conductivity form 71.0 Scm−1in air to 3.8 Scm−1 in 97% H2–3% H2O. Moreover, it is shown that Rp value recorded in air is effectively decreased to ~0.33 Ωcm2, and keeps constant during the following 200-h redox stability testing, while Rp value measured in 97% H2–3% H2O atmosphere is gradually decreased to 0.82 Ωcm2, which can be explained by the enhanced electro-catalytic properties of PSFM electrode induced by the gradually exsolved Fe nanocatalysts from parent PSFM electrode. At the same time, DRT analysis demonstrates that the sub-electrode process including oxygen/hydrogen adsorption, dissociation ionization and surface diffusion to triple phase boundaries occurred at the electrode/electrolyte interfacial is the predominant rate-limiting step, which can be effectively accelerated by surface modification and exsolved Fe nanoparticles. These results indicate that PSFM is a promising symmetrical electrode material for symmetrical cell application because of its good electrochemical performance and excellent long-term redox stability.

Boosting the Electrocatalytic Activity of Pr 0.5 Ba 0.5 FeO 3-δ via Ni Doping in Symmetric Solid Oxide Electrolysis Cells

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Tuning Pr0.5Ba0·5FeO3-δ cathode to enhanced stability and activity via Ca-doping for symmetrical solid oxide fuel cells

Enhanced Electrocatalytic Activity and Stability for Symmetrical Solid Oxide Fuel Cells with Praseodymium-Doped SrCo0.2Fe0.8O3-δ Electrodes

Multi-functional perovskite oxide Pr 0.6 Sr 0.4 Mn 0.2 Fe 0.7 Ni 0.1 O 3− δ as an efficient quasi-symmetric electrode for solid oxide fuel/electrolysis cells

An Efficient Electrocatalyst As Cathode Material for Solid Oxide Fuel Cells: BaFe0·95Sn0·05O3−δ

Ni–Doped Pr0.7Ba0.3MnO3−δ Cathodes for Enhancing Electrolysis of CO2 in Solid Oxide Electrolytic Cells

Nickel-substituted Ba0.5Sr0.5Co0.8Fe0.2O3−δ: a Highly Active Perovskite Oxygen Electrode for Reduced-Temperature Solid Oxide Fuel Cells

Advancing Solid Oxide Fuel Cell Performance: Enhanced Electrochemical Properties of Pr1- xCaxBaFe2O5+δ Nanofiber Cathodes via Ca Doping

RuOx modified PrBaFe1.8Hf0.2O5+δ surface for boosting the performance of symmetrical solid oxide fuel cells

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode

Enhancing ORR activity and CO2 tolerance of Pr0.4Sr0.6Co0.2Fe0.8O3--based SOFC cathode through synergistic doping and surface modification

Preparation and characterization of a redox-stable Pr0.4Sr0.6Fe0.875Mo0.125O3-δ material as a novel symmetrical electrode for solid oxide cell application

Ta-doped PrBaFe2O5+δ double perovskite as a high-performance electrode material for symmetrical solid oxide fuel cells

Gadolinium-doped SrFeO 3 As a Highly Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

Cobalt-free double-perovskite oxide Sr2Ti0.9FeNi0.1O6 as a promising electrode for symmetric solid oxide electrolysis cells

Preparation and Properties of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ As Novel Oxygen Electrode for Solid Oxide Electrolysis Cells

Novel cobalt and strontium-free perovskite Pr0.5Ba0.5Fe1-xNixO3-δ (x=0 and 0.2) as cathode for intermediate-temperature solid oxide fuel cells

Influences of equal A-site rare-deficiency or B-site high-valent metal doping on NdBaFe2O employed as the symmetrical electrode for solid oxide fuel cells

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell