Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

Strain amplitude-dependent cyclic softening behavior of carbide-free bainitic rail steel: Experiments and modeling

A cyclic visco-plastic constitutive model for the ratcheting behavior of U75VG rail steel under a wide range of loading rates

The effect of microstructure evolution on the ratchetting-fatigue interaction of carbide-free bainite rail steels under different heat-treatment conditions

Dynamic mechanical behaviors of pearlitic U71MnG rail steel: Deformation mechanisms and constitutive model

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

The Hysteresis Behavior Analysis Model of BLY160 Low-Yield-point Steel

Sliding Wear and Low Cycle Fatigue Properties of New Carbide Free Bainitic Rail Steel

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects

Influence of Mn Addition on Cyclic Deformation Behaviour of Bainitic Rail Steels

On stress and deformation accumulation of continuously welded rails under cyclic thermal loading in high-speed railways

An experimental and theoretical investigation of the response of BS11 steel to cyclic loading

Strain Cyclic Characteristics and Ratchetting Behaviors of High-Speed Railway Train Axle Steel EA4T

Crystal plasticity modeling of grain boundary softening and fatigue in U75V pearlite steel under low strain conditions: A study of cyclic rolling contact fatigue

Cyclic softening behavior of structural steel with strain range dependence

Non-saturated Cyclic Softening and Uniaxial Ratcheting of a High-Strength Steel: Experiments and Viscoplastic Constitutive Modeling

A Dislocation-Based Constitutive Model for the Cyclic Response of Nanolath Strengthened Steels

Experimental and Modeling Study of Uniaxial Cyclic Behaviors of Structural Steel under Ascending/descending Strain Amplitude-Controlled Loading

Temperature-dependent cyclic plastic deformation of U75VG rail steel: Experiments and simulations

Uniaxial material model with softening for simulating the cyclic behavior of steel tubes in concrete‐filled steel tube beam‐columns