Abstract:Abstract Global warming is one of the most significant issues the world is facing. Capturing carbon dioxide from the atmosphere or industrial processes and storing it in geological formations (carbon capture and storage, CCS) can help counteract climate change. Nevertheless, the interaction between well barrier elements such as cement, casing, tubulars, packers, and valves can lead to possible leakages. To accomplish successful carbon dioxide sequestration, injecting the carbon dioxide in its supercritical state is necessary. The supercritical carbon dioxide can corrode steel and elastomers and react with the calcium compounds in the cement, dissolving them and forming calcium carbonate and bicarbonate in the process. This carbonation can lead to channels forming on the cement-to-rock interface or cracking due to the carbonate precipitation, resulting in a loss of well integrity. This study focusses on finding ways that enable the continuous monitoring of cement integrity, under in-situ conditions, in a lab setup. The construction of an autoclave, capable of withstanding supercritical conditions of carbon dioxide, facilitates the in-situ monitoring. This autoclave also makes CT-scans of the pressurized sample possible, as well as acoustic measurements, using state-of-the-art piezo elements. The first tests will establish a baseline using neat Class G Portland cement to verify the design and sensors. The set up consists of a rock core in the middle of the autoclave surrounded by a cement sheath. A prepared channel in the center of the core expedites the distribution of the carbon dioxide. Once the ability of the sensors to monitor the integrity is verified, different cement compositions and their interaction with supercritical carbon dioxide can be studied. The experimental setup and the procedure discussed here closely simulate the downhole condition. Hence, the results obtained using this setup and procedure is representative of what could be observed downhole. The direction is not to remove the sample from the autoclave for analysis, as is the current industry practice, but to measure cement integrity under in-situ conditions over an extended period of time. Digitalization is powering the in-situ analysis in these tests. The first two tests of this study, using the afore mentioned autoclave, investigated the carbonation behaviour of two Class G Portland cement slurrys, one with a low and one with a high slurry-density. The low-density slurry showed extensive degradation and even the high-density slurry showed carbonation, but only close to the sandstone core. The results from this study can lead to the prevention of leakage of carbon dioxide to the environment and other formations, which defeats the purpose of carbon dioxide sequestration. These results should improve the economics of these wells as well as the health, safety, and environmental aspects.

Exploring the potential of stable isotope methods for identifying the origin of CO2 in the carbonation process of cementitious materials within the carbon capture and storage environment

Use of hydrated cement pastes (HCP) as a CO<sub>2</sub> sponge

Real-Time Monitoring of the Effect of CO2 on the Cement Sheath

Investigation of Chemical Processes in Cement Exposed to Wet ScCO2 and CO2-saturated Brine in Geological CO2 Storage Conditions

Experimental evaluation of cement integrity on exposure to supercritical CO2 using NMR: Application to geostorage

Investigation of Carbonation Kinetics in Carbonated Cementitious Materials by Reactive Molecular Dynamics Simulations

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Mechanochemical formation of highly stable amorphous calcium carbonate in calcium silicates: Potential long-term storage of CO2 in cement

Accelerated Carbonation Technology Of Reactive Mgo-Stabilized Soil For Possible Co2 Sequestration

An Investigation of the Source of Calcium Carbonate from the Carbonated Portland Cement: Based on the Transformation of Hydrates

Reconstructing the temperature and origin of CO2 mineralisation in CarbFix calcite using clumped, carbon and oxygen isotopes

Environmental Isotopes in Co2 Geological Sequestration

Quantification of CO2-cement-rock Interactions at the Well-Caprock-reservoir Interface and Implications for Geological CO2 Storage

Comprehensive Comparative Review of the Cement Experimental Testing Under CO2 Conditions

Priorities for supporting emission reduction technologies in the cement sector – A multi-criteria decision analysis of CO2 mineralisation

Substantial Global Carbon Uptake by Cement Carbonation

Modified Wollastonite Sequestrating Co2 and Exploratory Application of the Carbonation Products

Characterization of the Pore Structure of Well Cement under Carbon Capture and Storage Conditions by an Image-Based Method with a Combination of Metal Intrusion

Greenhouse Gas Control Technologies , GHGT-13 , 14-18 November 2016 , Lausanne , Switzerland Closing of micro-cavities in well cement upon exposure to CO 2 brine

Influence on Compressive Strength and CO2 Capture after Accelerated Carbonation of Combination Β-C2s with Γ-C2s

Carbon Capture and Utilization by mineralization of cement pastes derived from recycled concrete