Fabrication and Characterization of Nylon 66/PAN Nanofibrous Film Used as Separator of Lithium-Ion Battery

Yu-Hsun Nien,Chih-Ning Chang,Pao-Lin Chuang,Chun-Han Hsu,Jun-Lun Liao,Chen-Kai Lee

DOI: https://doi.org/10.3390/polym13121984

IF: 5

2021-06-17

Polymers

Abstract:In recent years, portable electronic devices have flourished, and the safety of lithium batteries has received increasing attention. In this study, nanofibers were prepared by electrospinning using different ratios of nylon 66/polyacrylonitrile (PAN), and their properties were studied and compared with commercial PP separators. The experimental results show that the addition of PAN in nylon 66/PAN nanofibrous film used as separator of lithium-ion battery can enhance the porosity up to 85%. There is also no significant shrinkage in the shrinkage test, and the thermal dimensional stability is good. When the Li/LiFePO4 lithium battery is prepared by nylon 66/PAN nanofibrous film used as separator, the capacitor can be maintained at 140 mAhg−1 after 20 cycles at 0.1 C, and the coulombic efficiency is still maintained at 99%, which has excellent electrochemical performance.

polymer science

What problem does this paper attempt to address?

The paper attempts to address the safety and performance issues of lithium-ion battery separators. Specifically, the researchers prepared nylon 66/polyacrylonitrile (PAN) nanofiber membranes in different proportions using electrospinning technology and used them as separators for lithium-ion batteries. They hope that this new type of separator can improve the battery's porosity, thermal dimensional stability, electrolyte absorption rate, and electrochemical performance, thereby enhancing the overall safety and cycle life of the battery.

### Main Research Objectives:
1. **Increase Porosity**: By adding PAN, the researchers hope to increase the porosity of the nylon 66/PAN nanofiber membranes, thereby increasing the electrolyte absorption and improving the battery's conductivity.
2. **Improve Thermal Dimensional Stability**: The researchers aim to optimize the structure of the nanofibers so that the separator does not undergo significant shrinkage at high temperatures, thereby improving the battery's safety.
3. **Enhance Mechanical Performance**: Although high porosity may reduce mechanical strength, the researchers hope to find a balance by adding an appropriate amount of PAN, making the separator both highly porous and mechanically robust.
4. **Improve Electrochemical Performance**: The researchers hope that this new type of separator can exhibit excellent electrochemical performance in actual batteries, such as high capacity retention and high coulombic efficiency.

### Research Background:
With the proliferation of portable electronic devices, the safety of lithium-ion batteries has become increasingly important. Although traditional commercial polypropylene (PP) separators are widely used, they tend to shrink at high temperatures, leading to battery short circuits and safety hazards. Therefore, developing new separator materials with high performance and high safety has become a crucial research direction.

### Solution:
The researchers prepared nylon 66/PAN nanofiber membranes in different proportions using electrospinning technology and conducted detailed characterization and performance testing. The experimental results show that adding PAN can significantly increase the porosity of the nanofiber membranes to 85%, and there is no significant shrinkage in the thermal shrinkage test, indicating good thermal dimensional stability. Additionally, lithium-ion batteries using this separator can maintain a capacity of 140 mAhg⁻¹ after 20 cycles, with a coulombic efficiency of up to 99%, demonstrating excellent electrochemical performance.

### Conclusion:
The study successfully prepared a high-performance nylon 66/PAN nanofiber separator, which not only increased the battery's porosity and electrolyte absorption rate but also significantly enhanced thermal dimensional stability and mechanical performance, thereby improving the overall safety and electrochemical performance of the battery. This new type of separator is expected to play an important role in future lithium-ion battery applications.