Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Combination of 2D and 3D Finite Element Models in the Design of Axial Flux Permanent Magnet Machines for Electric Vehicle Applications

Quasi-3-D Analytical Method of Open-Circuit Magnetic Field for Yokeless and Segmented Armature Machine

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Winding Configurations and Pole/Tooth Combinations of Doubly-Fed Flux-Switching Permanent Magnet Machines

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

FEA-Based Design and Comparative Study of Axial Flux Permanent Magnet Machines with Various Topologies

Design of Axial Flux Permanent Magnet Machines with Segmental 2D Finite-Element Method

Optimal Design of an Axial Flux Permanent Magnet Motor

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Ultra‐fast finite element analysis of coreless axial flux permanent magnet synchronous machines

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Design Optimization of Multi-Layer Permanent Magnet Synchronous Machines for Electric Vehicle Applications

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

A New Hybrid Excitation Machine with Dual-Stator Single-Rotor Axial-Flux Topology for Electric Vehicle Traction Application

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Design and analysis of a new fractional-slot-windings axial-flux permanent-magnet machine

Comparative Study of Yokeless Stator Axial-Flux PM Machines having Fractional Slot Concentrated and Integral Slot Distributed Windings for Electric Vehicle Traction Applications

Analytical model of an ironless axial flux permanent magnet machine for electromagnetic force calculation and vibration analysis

A Novel Double-Sided Offset Stator Axial-Flux Permanent Magnet Motor for Electric Vehicles