Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Nucleate pool boiling heat transfer in wickless heat pipes (two-phase closed thermosyphons): A critical review of correlations

A Review of Pool-Boiling Processes Based on Bubble-Dynamics Parameters

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Assessment of two-phase heat transfer coefficient and critical heat flux correlations for cryogenic flow boiling in pipe heating experiments

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Assessment of existing two phase heat transfer coefficient and critical heat flux correlations for cryogenic flow boiling in pipe quenching experiments

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

Theoretical and experimental investigation on heat transfer characteristics in a cryogenic two-phase closed thermosyphon

Numerical Investigation of the Two-Phase Closed Thermosyphon Operating with Non-Uniform Heat Flux Profiles

Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Analysis on distribution of liquid and vapor phase and heat transfer capacity in evaporator of a two-phase closed thermosyphon

Saturated nucleate pool boiling of cryogenic fluids: Review of databases, assessment of existing models and correlations, and development of new universal correlation

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Numerical Study on Bubble Departing Behavior from Heated Surface in Subcooled Pool Boiling

Visualization and heat transfer comparative analysis of two phase closed thermosyphon

Numerical Study of Bubble Coalescence Heat Transfer During Nucleate Pool Boiling

NEW FLOW-PATTERN-BASED HEAT TRANSFER CORRELATIONS FOR WATER IN MICRO/MINICHANNELS

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

Assessment and development of saturated and subcooled heat transfer coefficient correlations for cryogenic flow boiling in tubes

Comparison Work about Different Empirical Formulas for the Boiling Heat Transfer Coefficient in Separated Heat Pipe System