Abstract:In the current electromechanical model of cantilevered piezoelectric energy harvesters, the assumption of uniform electric field strength within the piezoelectric layer is commonly made. This uniform electric field assumption seems reasonable since the piezoelectric layer looks like a parallel-plate capacitor. However, for a piezoelectric bender, the strain distribution along the thickness direction is not uniform, which means the internal electric field generated by the spontaneous polarization cannot be uniform. In the present study, a non-uniform electric field in the piezoelectric layer is resolved using electrostatic equilibrium equations. Based on these, the traditional distributed parameter electromechanical model is corrected and simplified to a practical single mode one. Compared with a traditional model adopting a uniform electric field, the bending stiffness term involved in the electromechanical governing equations is explicitly corrected. Through comparisons of predicted power output with two-dimensional finite element analysis, the results show that the present model can better predict the power output performance compared with the traditional model. It is found that the relative corrections to traditional model have nothing to do with the absolute dimensions of the harvesters, but only relate to three dimensionless parameters, i.e., the ratio of the elastic layer's to the piezoelectric layer's thickness; the ratio of the elastic modulus of the elastic layer to the piezoelectric layer; and the piezoelectric materials' electromechanical coupling coefficient squared, k312. It is also found that the upper-limit relative corrections are only related to k312, i.e., the higher k312 is, the larger the upper-limit relative corrections will be. For a PZT-5 unimorph harvester, the relative corrections of bending stiffness and corresponding resonant frequency are up to 17.8% and 8.5%, respectively. An inverse problem to identify the material parameters based on experimentally obtained power output performance is also investigated. The results show that the accuracy of material parameters identification is improved when considering a non-uniform electric field.

Investigation upon the performance of piezoelectric energy harvester with elastic extensions

Experimental and simulation of a tension-like nonlinear piezoelectric energy harvester

Theoretical analysis and experimental research of piezoelectric-electromagnetic hybrid vibration energy harvester

Theoretical and Experimental Studies of a Piezoelectric Ring Energy Harvester

Modelling and analysis of a novel E-shape piezoelectric vibration energy harvester with dynamic magnifier

An enhanced broadband piezoelectric energy harvester via elastic amplification structure for multidirectional vibration

Electromechanical Modeling and Experimental Analysis of a Compression-Based Piezoelectric Vibration Energy Harvester

Numerical and experimental investigation of an auxetic piezoelectric energy harvester with frequency self-tuning capability

Investigation on the factors influencing the performance of piezoelectric energy harvester

Elastic-electro-mechanical modeling and analysis of piezoelectric metamaterial plate with a self-powered synchronized charge extraction circuit for vibration energy harvesting

Design and experimental investigation of a positive feedback magnetic-coupled piezoelectric energy harvester

Analytical Modeling of a Doubly Clamped Flexible Piezoelectric Energy Harvester with Axial Excitation and Its Experimental Characterization

A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams

Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations

Design, development, and theoretical and experimental tests of a nonlinear energy harvester via piezoelectric arrays and motion limiters

Piezoelectric energy harvester with outstanding output performance at low frequency vibration based on concentrating force on the piezoelectric element by parallel springs

Optimization of cantilevered piezoelectric energy harvester with a fixed resonance frequency

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

Study of a piezoelectric energy harvesting collaborative strategy based on the synergy of multi‐frequency technique and magnetic nonlinear technique

Investigation of Nonlinear Piezoelectric Energy Harvester for Low-Frequency and Wideband Applications

Performance Correction and Parameters Identification Considering Non-Uniform Electric Field in Cantilevered Piezoelectric Energy Harvesters