The effects of calcium hydroxide on hydrogen chloride emission characteristics during a simulated densified refuse-derived fuel combustion process

Kung-Yuh Chiang,Jer-Chyuan Jih,Kae-Long Lin
DOI: https://doi.org/10.1016/j.jhazmat.2007.12.103
IF: 13.6
2008-08-01
Journal of Hazardous Materials
Abstract:This study investigated the effects of different calcium hydroxide (Ca(OH)(2)) addition methods on the potential for hydrogen chloride (HCl) formation in a simulated densified refuse-derived fuel (RDF-5) with single metal combustion system. These experiments were conducted at 850 degrees C with the Ca(OH)(2) spiked in the RDF-5 production or injection in the flue gas treatment system. The results indicated that the potential for HCl formation was decreased significantly by Ca(OH)(2) spiked in the RDF-5 production or injection in the flue gas treatment system. However, the Ca(OH)(2) injection method in the flue gas for HCl emission reduction was better than other method. According to the relationship between the HCl emission and amount of Ca(OH)(2) injected or spiked, it is interesting to find that when the Ca(OH)(2) injected or spiked ranged from 0% to 5%, the potential for HCl formation in the single metal combustion system decreases significantly with increasing Ca(OH)(2) injected or spiked ratio. A corresponding increase in the amount of CaCl(2) partitioned to the fly ash was observed. However, with the ratio of Ca(OH)(2) higher than 5%, the amount of HCl formation showed that no further significant variation occurred with increasing Ca(OH)(2) spiked ratio.
environmental sciences,engineering, environmental
What problem does this paper attempt to address?