Abstract:Atomically dispersed and nitrogen-coordinated single iron sites (FeN4) embedded in carbon (Fe-N-C) catalysts are the most promising platinum group metal (PGM)-free catalysts. However, they have yet to match their Pt counterparts for oxygen reduction reaction (ORR) activity and stability in proton exchange membrane fuel cells (PEMFCs). Here, we developed viable Fe-N-C catalysts, which, for the first time, demonstrated competitive activity to that of Pt/C catalysts and dramatically enhanced stability and durability under practical PEMFC operating conditions. The most active Fe-N-C catalyst achieved a record half-wave potential (E1/2 = 0.915 V vs. RHE at 0.6 mgcatcm-2) and an ORR mass activity of 10.5 mA mgcat at 0.9 V in (RDE) tests, exceeding a Pt/C baseline catalyst (60 µgPt cm-2) by 40 mV in acidic electrolytes. This compelling activity of the Fe-N-C catalyst in aqueous acids on rotating disk electrode (RDE) was successfully transferred to a fuel cell membrane electrode assemblies (MEAs), generating an initial current density of 44.2 mA cm-2 exceeding the U.S. DOE 2025 target (i.e., 44 mA cm-2) at 0.9 VIR-free under O2. Under practical hydrogen-air conditions, record 151 mA cm-2 at 0.8 V and peak power density of 601 mW cm-2 were achieved. Importantly, we discovered that depositing nitrogen-carbon species on the catalyst surface via chemical vapor deposition (CVD) dramatically enhanced catalyst stability, evidenced by performance durability after accelerated stress tests (30 000 square-wave voltage cycles under H2/air) and long-term steady-state life tests (> 300 hours at 0.67 V). Innovative identical location-scanning transmission electron microscopy (IL-STEM) experiments confirmed that the CVD process leads to deposition of nitrogen-doped carbon onto the catalyst surfaces. Along with theoretical modeling, a reconstruction of the carbon structure adjacent to FeN4 sites leads to increased robustness against demetallation and carbon oxidation. This work opens new avenues for developing earth-abundant iron-based catalysts with extraordinary activity and stability, thus competing with Pt and addressing the cost barrier of current PEMFCs.

Carbon Supported Polyaniline as Anode Catalyst: Pathway to Platinum-Free Fuel Cells

Carbon Monoxide-Resistant Anode Catalysts for Single-Cell Direct Carbon Monoxide Fuel Cells: Binary, Ternary, And Quaternary Platinum Alloys as Anode Electrocatalysts

Vertically Aligned Titanium Nitride Nanorod Arrays As Supports of Platinum–Palladium–Cobalt Catalysts for Thin‐Film Proton Exchange Membrane Fuel Cell Electrodes

Durable ultra‐low‐platinum ionomer‐free anode catalyst for hydrogen proton exchange membrane fuel cell

High performance platinum single atom electrocatalyst for oxygen reduction reaction

Pt0.61Ni/C for High-Efficiency Cathode of Fuel Cells with Superhigh Platinum Utilization

Carbon Aerogel Supported Pt–Ru Catalysts for Using As the Anode of Direct Methanol Fuel Cells

Highly dispersed ultrafine PtCo alloy nanoparticles on unique composite carbon supports for proton exchange membrane fuel cells

Nano-structured Carbon Support for Pt/C Anode Catalyst in Direct Methanol Fuel Cell

Facile electrochemical fabrication of Nickel-Coated Polydiphenylamine (Ni/PDPA) nanocomposite material as efficient anode catalyst for direct alcohol fuel cell application

Chemical Activation and Catalytic Graphitization Enable a Durable and Active Pt/C for Low Platinum Fuel Cell

High performing platinum—copper catalyst for self—breathing polymer electrolyte membrane fuel cell

Iron-Based Catalysts with Improved Oxygen Reduction Activity in Polymer Electrolyte Fuel Cells

Outstanding fuel cell performance of a fully platinum-free electrocatalysts using a cost-effective catalyst support material

Durable and High-Power Iron-Based Cathodes for Proton-Exchange Membrane Fuel Cells

Nitrogen-Doped PtNi Catalysts on Polybenzimidazole-Functionalized Carbon Support for the Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells

Platinum-Containing Nanoparticles on a Nitrogen-Doped Carbon Support as Highly Active Electrocatalysts for Low-Temperature Fuel Cells

Ultra-thin layer structured anodes for highly durable low-Pt direct formic acid fuel cells

Proton-Conducting Polymer-Coated Carbon Nanofiber Mats for Pt-Anodes of High-Temperature Polymer-Electrolyte Membrane Fuel Cell

Carbon Nanohorn-Derived Graphene Nanotubes as a Platinum-Free Fuel Cell Cathode

High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt