Abstract:Abstract The construction of tunnel portal not only has to face the challenges of complex geological conditions such as shallow buried and asymmetrically loaded, but also needs to consider the adverse effects of factors such as the layout form of the tunnel. Thus, the construction of portal has always been the difficulty and focus of tunnel engineering construction. Under the coupling of multiple adverse factors such as complex geological conditions and special layout form, the tunnel portal is prone to excessive deformation, supporting structures cracking and even collapse during the excavation. In this study, a shallow buried and asymmetrically loaded tunnel with small clear-distance in northwest China was taken as an engineering case. Aiming at the distresses of slope instability, peeling off and block falling of primary support concrete and cracking of secondary lining concrete in the tunnel portal construction, combined with field investigation, statistical analysis, numerical simulation and deformation monitoring, the failure mechanism of supporting structures was deeply studied, and the corresponding treatment measures were proposed. The research results indicated that the loose and broken gravel soil in the shallow buried section, asymmetrical loading, surface water infiltration, and short construction spacing between two tunnels were the main triggers of supporting structures failure. Affected by the topographic bias, the loose load generated by the surrounding rock on the deep buried side squeezed the entire tunnel to the shallow buried side after the portal excavation. And this deformation trend became more significant after the gravel soil was deteriorated by water immersion. The retaining wall produced a clockwise rotation deformation around the wall corner in the process of limiting the tunnel deviation, and the local wall body cracked due to the excessive tensile stress. The primary support concrete and secondary lining concrete produced excessive asymmetrical deformation because of the significant asymmetrical loading. The concrete with excessive deformation was cracked by obvious tensile or shear stress. The following tunnel excavation had a significant negative impact on the stability of the prior tunnel. Combining the failure mechanism of the supporting structures and the characteristics of the continuous development of cracks, the treatment measures of ‘stabilize the stratum first and then treat the cracks’ were proposed, including the backfilling and tamping the shallow buried side at tunnel portal, reinforcing the interlaid rock by ground surface grouting, setting intercepting ditch at the slope top, staggering a certain safe excavation distance between the following tunnel and the prior tunnel. The field monitoring and patrol inspection results indicated that the proposed treatment measures had achieved the expected results. The research results can provide corresponding construction experience and suggestions for similar projects in the future.

Better understanding the failure modes of tunnels excavated in the boulder-cobble mixed strata by distinct element method

Failure mechanism and treatment measures of supporting structures at portal for a shallow buried and asymmetrically loaded tunnel with small clear-distance

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Failure mechanism and treatment measures of supporting structures at the portal for a shallow buried and asymmetrically loaded tunnel with small clear-distance

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

BRITTLE FAILURE OF SURROUNDING ROCK MASS IN DEEP TEST TUNNELS AND ITS NUMERICAL SIMULATION

Large-scale geo-mechanical model tests for stability assessment of super-large cross-section tunnel

Failure mechanism analysis and treatment of tunnels built in karst fissure strata: A case study

Study on progressive failure mode of surrounding rock of shallow buried bias tunnel considering strain-softening characteristics

Collapse mechanism and treatments of a deep tunnel in the weathered granite fault zone

Tunnel failure mechanism during loading and unloading processes through physical model testing and DEM simulation

Simulation analysis on seismic dynamic response of pile supported tunnels in deep backfill area of soil-rock mixture

Macro and micro failure mechanism of surrounding rock of small span tunnel under different stress paths

Coupling Failure Mechanism of Underground Structures Induced by Construction Disturbances

Failure mechanism and stability identification of surrounding rock for soft-rock tunnels using long-footage rapid excavation method

Land Lapse Phenomenon and Surface Subsidence Law of Shield Tunnel Passing Through Rock-Bearing Formation

Failure mechanism analysis for tunnel construction crossing the water-rich dense fracture zones: A case study

Geo-mechanical model test on excavation and support of deep tunnel crossing a fault under hydro-mechanical coupled condition

Quantitative analysis of construction risks in shallowly buried biased tunnel portal section

Surrounding rock instability mechanism for fault-crossing tunnels in water-rich soft rock