Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Integrated adsorption using ultrahigh-porosity magnesium oxide with multi-output predictive deep belief networks: A robust approach for fluoride treatment

Ultrahigh-porosity Ranunculus-like MgO adsorbent coupled with predictive deep belief networks: A transformative method for phosphorus treatment

High-efficiency fluoride removal using hierarchical flower-like magnesium oxide: Adsorption characteristics and mechanistic insights

Efficient fluoride removal using nano MgO: mechanisms and performance evaluation

Application of recurrent neural networks to model the defluoridation process of hydroxyapatite synthesized by simple methods

Preparation and application of magnesium oxide nanoparticles for superiorly fluoride removal

Micro/nanostructured MgO hollow spheres with selective adsorption performance and their application for fluoride monitoring in water

Modeling defluoridation of real-life groundwater by a green adsorbent aluminum/olivine composite: Isotherm, kinetics, thermodynamics and novel framework based on artificial neural network and support vector machine

Amino-functionalized novel biosorbent for effective removal of fluoride from water: process optimization using artificial neural network and mechanistic insights

Enhanced fluoride removal using Mg-Zr binary metal oxide nanoparticles confined in a strong-base anion exchanger

Adsorption removal of fluoride from polluted drinking waters using Mn-Al-La oxide

Enhanced Adsorption Performance of Subordinate Magnesium Sites in Pinhole Magnesium Oxide Nanosheets with Rich Oxygen Vacancies

Development of innovative and green adsorbents for in situ cleanup of fluoride-polluted groundwater: Mechanisms and field-scale studies

Process modeling, characterization, optimization, and mechanisms of fluoride adsorption using magnetic agro-based adsorbent

Defluoridation of water using nano-magnesium oxide

Al-1,3,5-benzenetricarboxylic metal–organic frameworks: A promising adsorbent for defluoridation of water with pH insensitivity and low aluminum residual

Adsorption Characteristics and Charge Transfer Kinetics of Fluoride in Water by Different Adsorbents

Synthesis and Characterization of Porous MgO Nanosheet-Modified Activated Carbon Fiber Felt for Fluoride Adsorption

Performance Evaluation of Magnetic Anion Exchange Resin Removing Fluoride

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Enhanced removal of hazardous fluoride from drinking water by using a smart material: Magnetic iron oxide fabricated layered double hydroxide/cellulose composite