Abstract:Herein, a bithiazole‐substituted small molecule donor (ZW1) with high crystallinity is synthesized and employed to fabricate ternary devices. The addition of ZW1 enhances the crystallinity of the blend films. Furthermore, the good miscibility between D18 and ZW1 drives Y6 to separate from its mixed phase with D18, optimizing the phase separation and vertical distribution of the active layer. Combining the regulation of crystallinity and miscibility, charge transport and recombination are improved in ternary devices. As a result, outstanding power conversion efficiencies (PCEs) of 18.50% and 16.67% are achieved for 120 nm‐thick and 300 nm‐thick ternary organic solar cells (OSCs), respectively. The 16.67% PCE is one of the highest values for thick‐film OSCs reported to date. Organic solar cells (OSCs) with thick active layers exhibit great potential for future roll‐to‐roll mass production. However, increasing the thickness of the active layer generally leads to unfavorable morphology, which decreases the device's performance. Therefore, it is a critical challenge to achieve OSCs with high efficiency and thick film simultaneously. Herein, a small molecular donor, ZW1, incorporating a bithiazole unit along with a thiophene group as a π‐bridge is reported. ZW1 with high crystallinity is employed to fabricate D18:ZW1:Y6 ternary devices, which enhances the crystallization, optimizes the morphology, and suppresses bimolecular recombination. Additionally, ZW1 shows better miscibility with D18, resulting in the preferred vertical phase distribution. As a result, an outstanding power conversion efficiency (PCE) of 18.50% is realized in ternary OSCs with 120 nm active layer thickness. Importantly, the thick ternary OSCs attain a high PCE of 16.67% (thickness ≈300 nm), significantly higher than the corresponding binary devices (13.50%). The PCE of 16.67% is one of the highest values for thick‐film OSCs reported to date. This work demonstrates that the incorporation of highly crystalline small‐molecule donors into ternary OSCs, possessing good miscibility with host materials, presents an effective strategy for fabricating highly efficient thick OSCs.

Regulation of Crystallinity and Vertical Phase Separation Enables High‐Efficiency Thick Organic Solar Cells

A Bithiazole‐Substituted Donor for High‐Efficiency Thick Ternary Organic Solar Cells via Regulation of Crystallinity and Miscibility

Adding the third component with similar building blocks to regulate the miscibility of active layer enables high efficient ternary solar cells

Highly Efficient Organic Solar Cells with the Highly Crystalline Third Component As a Morphology Regulator.

Modulation of Crystallization Kinetics Using a Guest Acceptor for High-Performance Organic Solar Cells with 19.8% Efficiency

Vertical Phase Regulation with 1,3,5‐Tribromobenzene Leads to 18.5% Efficiency Binary Organic Solar Cells

Vertical Composition Distribution and Crystallinity Regulations Enable High-Performance Polymer Solar Cells with >17% Efficiency

Regulating Crystallinity Mismatch Between Donor and Acceptor to Improve Exciton/Charge Transport in Efficient Organic Solar Cells

Modulating Aggregation Behavior by Ternary Strategies for Efficient and Stable Thick‐Film Organic Solar Cells

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by An Oligomeric Acceptor

Mixed Solvent as a Critical Factor in Optimizing Phase Separation of All Small Molecule Organic Solar Cells

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

Delicate chemical structure regulation of nonfullerene acceptor for efficient and large thickness organic solar cells

Oligomeric donor with appropriate crystallinity for organic solar cells

Molecular Interactions Regulation by Adding a Third Component with High Miscibility Suppresses the Energetic Disorder and Reduces Energy Loss for Efficient Ternary Solar Cells

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells

Enhancing Performances of Solution-Processed Inverted Ternary Small-Molecule Organic Solar Cells: Manipulating the Host-Guest Donors and Acceptor Interaction

Dual-Donor-Induced Crystallinity Modulation Enables 19.23% Efficiency Organic Solar Cells

Efficient and Stable Ternary Organic Solar Cells Using Liquid Crystal Small Molecules with Multiple Synergies

Modulating Crystallinity and Miscibility via Side‐chain Variation Enable High Performance All‐Small‐Molecule Organic Solar Cells