What Product Might a Renewal of Heavy IonFusion Development Offerthat Competes with Methane Microbes and Hydrogen HTGRs
Grant Logan,Ed Lee,Simon Yu,Dick Briggs,John Barnard,Alex Friedman,Hong Qin,Will Waldron,Mattaheus Leitner,Joe Kwan,Enrique Henestroza,George Caporaso,Wayne Meier,Max Tabak,Debbie Callahan,Ralph Moir,Per Peterson
DOI: https://doi.org/10.2172/902800
2006-01-01
Abstract:In 1994 a Fusion Technology journal publication by Logan, Moir and Hoffman described how exploiting unusually-strong economy-of-scale for large (8 GWe-scale) multi-unit HIF plants sharing a driver and target factory among several low cost molten salt fusion chambers {at} 100MWe net power DEMO. This scoping study, at a very preliminary conceptual level, attempts to identify how we might meet the last two great challenges taking advantage of several recent ideas and advances which motivate reconsideration of modular HIF drivers: >60X longitudinal compression of neutralized ion beams using a variable waveform induction module in NDCX down to 2 nanosecond bunches, the proof-of-principle demonstration of fast optical-gated solid state SiC switches by George Caporaso's group at LLNL (see George's RPIA06 paper), and recent work by Ed Lee, John Barnard and Hong Qin on methods for time-dependent correction of chromatic focusing errors in neutralized beams with up to 10 % {Delta}v/v velocity tilt, allowing 5 or more bunches, and shorter bunches, and possibly 40 that would need higher peak beam intensities in order to reduce total driver energy below 1 MJ. In principle, both PLIA and induction accelerators might benefit from multiple short bunches (see June 24, 2005 talk by Logan on multi-pulsing in PLIA accelerators for IFE), although the PLIA approach, because of fixed circuit wave velocities at any z, requires imaginative work-arounds to handle the different bunch velocities required. George's RPIA06 paper also describes a different type of radial line induction linac that might be considered, but its unclear how the required pulse-to-pulse variable waveforms can be obtained with such pulselines. This initial MathCad analysis explores multi-pulsing in modular solenoid induction linacs (concept shown in Figure 1) considering high-q ECR sources, basic induction acceleration limits assuming affordable agile waveforms, transverse and longitudinal bunch confinement constraints, models to optimize bunch lengths, solenoid fields, core radial builds and switching. Figure 2 below illustrates one linac module for a driver example (not yet optimized) consisting of 40 linacs (20 at each end). Necessarily, this first look invokes many new ideas, but could they potentially meet the above challenges?