Abstract:Liquid-infused surfaces have recently gained prominence in engineering applications owing to their versatile characteristics such as self-cleaning, anti-fogging, drag reduction, and enhanced heat transfer. In this article, a numerical analysis of pressure-driven flow past a periodic array of rectangular transverse grooves infused with non-Newtonian immiscible lubricants is performed. The volume of fluid method is employed to capture the interface between primary and secondary fluids, and the power-law model is deployed to mimic the non-Newtonian lubricant. The drag reduction capability of the microchannel is examined for various parameters such as Reynolds number, liquid fraction, viscosity ratio, viscosity index, and contact angle. It is observed that the introduction of a non-Newtonian fluid (shear-thickening or shear-thinning) drastically modifies the interface velocity and hydrodynamic resistance. In particular, a shear-thinning lubricant enhances the slip length as the viscosity index (n) is reduced owing to the reduced viscosity at the interface. Note that, for a lubricant having n = 0.7, the percentage improvement in the slip length is 382% in comparison with a Newtonian counterpart having the same viscosity ratio, N = 0.1. Importantly, the introduction of a shear-thinning lubricant with a viscosity ratio N = 5, a liquid fraction of 0.8, and a behavior index n = 0.7 yielded a pressure drag reduction of 63.6% with respect to a classical no-slip channel and of 23% with reference to a microchannel with the Newtonian lubricant. Moreover, at high Reynolds numbers, Re→50, the drag mitigation is slightly lowered due to the primary vortex shift in the cavity. Furthermore, the effect of the interface contact angle (θc) is investigated, as θc drops from 90° (flat) to 45° (convex); the meniscus curvature is enhanced, and the effective slip length is reduced. These observations suggest that a shear-thinning lubricant-infused microchannel is a promising candidate for drag reduction in lab-on-chip applications.

Pressure drop measurements over anisotropic porous substrates in channel flow

Turbulent boundary layers over streamwise-preferential porous materials

Measurement and Determination of Friction Characteristic of Air Flow Through Porous Media

Turbulent boundary layers over substrates with streamwise-preferential permeability

Lattice Boltzmann simulations of turbulent shear flow between parallel porous walls

Coupled dynamics of wall pressure and transpiration, with implications for the modeling of tailored surfaces and turbulent drag reduction

An analysis of drag reduction using spanwise forcing on rough walls

Effects of porous substrates on the structure of turbulent boundary layers

Laminar Drag Reduction in Hydrophobic Microchannels

Direct Numerical Simulation of Compressible Turbulent Channel Flows over Porous Boundaries

Experimental Study on Drag Reduction Control of Porous Media Wall Turbulence

Pore-scale Simulation and Statistical Investigation of Velocity and Drag Force Distribution of Flow Through Randomly-Packed Porous Media under Low and Intermediate Reynolds Numbers

Turbulent flows over porous lattices: alteration of near-wall turbulence and pore-flow amplitude modulation

Hydrodynamic drag reduction in ribbed microchannel with infused non-Newtonian lubricants

Turbulent Boundary Layer over Porous Media with Wall-Normal Permeability

Pressure drag reduction via imposition of spanwise wall oscillations on a rough wall

Microscopic velocity field measurements inside a regular porous medium adjacent to a low Reynolds number channel flow

Flow regimes and types of solid obstacle surface roughness in turbulent heat transfer inside periodic porous media

Turbulent channel flow of finite-size spherical particles with viscous hyper-elastic walls

The Investigation of the Hydrodynamic Drag of a Slit Microchannel with a Textured Wall

A Homogenization Approach for Turbulent Channel Flows over Porous Substrates: Formulation and Implementation of Effective Boundary Conditions