Turbulent boundary layers over streamwise-preferential porous materials

Christoph Efstathiou,Mitul Luhar

DOI: https://doi.org/10.48550/arXiv.2006.00182

2020-05-30

Abstract:Recent numerical simulations indicate that streamwise-preferential anisotropic porous materials have the potential to reduce skin friction in turbulent flows through a similar mechanism to riblets. This paper reports particle image velocimetry (PIV) measurements made in turbulent boundary layers at $Re_\tau \approx 360$ over 3D-printed porous substrates exhibiting such streamwise-preferential permeability. The porous material has normalized streamwise permeability $\sqrt{K_{xx}^+}\approx 3.0$ and wall-normal and spanwise permeabilities $\sqrt{K_{yy}^+} = \sqrt{K_{zz}^+} \approx 1.1$. This material is flush-mounted into a cutout in the downstream half of a flat-plate boundary layer setup in a water channel facility. Measurements made at several locations along the porous substrate provide insight into boundary layer development. For fully-developed conditions, the mean profiles show the presence of a logarithmic region over the porous material with similar constants to those found over a smooth wall. A technique that estimates the mean profile at single-pixel resolution from the particle images suggests the presence of an interfacial slip velocity of $U_s^+ \approx \sqrt{K_{xx}^+}$ over the porous substrate. Friction velocity estimates obtained from outer layer fits to the mean profile suggest a marginal increase in drag over the porous substrate. PIV measurements show a decrease in the intensity of streamwise velocity fluctuations in the near-wall region and an increase in the intensity of wall-normal velocity fluctuations. These observations are consistent with simulation results, which suggest that materials with $\sqrt{K_{yy}^+} > 0.4$ are susceptible to the emergence of spanwise rollers similar to Kelvin-Helmholtz vortices that degrade drag reduction performance. Velocity spectra indicate that such structures emerge in the experiments as well.

Fluid Dynamics

What problem does this paper attempt to address?

This paper aims to explore the potential of anisotropic porous materials with streamline - direction priority to reduce frictional drag in turbulent boundary layers. Specifically, through the particle image velocimetry (PIV) technique, the researchers measured the characteristics of the turbulent boundary layer on 3D - printed porous substrates under the condition of Reynolds number \(Re_{\tau} \approx 360\). These porous materials have specific permeability characteristics, that is, the normalized permeability in the streamline direction \(\sqrt{K_{xx}^+} \approx 3.0\), while the normalized permeabilities in the wall - normal and spanwise directions \(\sqrt{K_{yy}^+}=\sqrt{K_{zz}^+} \approx 1.1\).

The main problem of the research is to verify whether this kind of porous material with streamline - direction priority can reduce turbulent frictional drag through a mechanism similar to that of ribbed surfaces, and to evaluate its performance in practical applications. Through experimental data, especially the analysis of the mean velocity profile, turbulent statistics and velocity spectra, the paper explores the influence of porous materials on the development of the turbulent boundary layer, and whether there are phenomena such as interface slip velocity \(U_s^+\). In addition, the research also focuses on whether this material will lead to a decrease in the intensity of streamwise velocity fluctuations in the near - wall region and an increase in the intensity of wall - normal velocity fluctuations, which are all key indicators for evaluating the drag - reduction effect of porous materials.