Magnetic Fe3S4 LTMCs micro-flowers@ wax gourd aerogel-derived carbon hybrids as efficient and sustainable electromagnetic absorber

Fei Pan,Zhicheng Liu,Baiwen Deng,Yanyan Dong,Xiaojie Zhu,Chuang Huang,Zhong Shi,Wei Lu

DOI: https://doi.org/10.1016/j.carbon.2021.04.053

IF: 10.9

2021-07-01

Carbon

Abstract:<p>As a dielectric loss-type absorber, lamellar transitional metal chalcogenides (LTMCs) become more and more popular in the electromagnetic (EM) absorbing field due to their unique two-dimensional sheet structure. However, it remains challenging for metallic sulfides to obtain magnetic loss, further promoting loss mechanism. Herein, magnetic Fe₃S₄ LTMCs wax gourd aerogel-derived carbon composites are fabricated through a facile pyrolysis process and subsequent hydrothermal method. Compared to a pure biomass carbon or Fe₃S₄, Fe₃S₄@C composites exhibited an optimized and adjustable EM characteristic, which can be put down to the synergistic effects between the dielectric/magnetic loss and the impedance match. The sample shows superior EM absorption properties with a minimum reflection loss (RL) of −58.85 dB at 3.1 mm and a broad effective bandwidth (EBW) of 5.40 GHz at the matching thickness of 2.0 mm with a filling ratio of 20 wt%. In addition, the radar cross section (RCS) simulation confirms that the material can effectively suppress EMW (−8.51 dB m² at zero degree) in practical applications. Therefore, it is believed that the as-prepared Fe₃S₄@C hybrids can be one of the prospective candidates as high-efficiency EMW absorbers.</p>

materials science, multidisciplinary,chemistry, physical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient and sustainable electromagnetic wave - absorbing material to address the increasingly serious problem of electromagnetic radiation pollution and meet the requirements for the survival performance of military weapons. Specifically, the article aims to optimize the electromagnetic wave - absorbing performance by designing and preparing a new type of magnetic Fe₃S₄ - layered transition - metal sulfide (LTMCs) micro - flower @ calabash - charcoal - aerogel - derived - carbon composite material.

### Main problems:
1. **Electromagnetic radiation pollution**: With the popularization of electronic communication technologies and devices, electromagnetic radiation pollution has become a serious problem in daily life, posing a potential threat to human health and precision equipment.
2. **Demand for high - performance electromagnetic wave - absorbing materials**: In order to effectively attenuate electromagnetic energy and convert it into heat energy or other forms of energy, it is necessary to develop efficient electromagnetic wave - absorbing materials. Ideal electromagnetic wave - absorbing materials should have high reflection loss, wide effective bandwidth, low coating thickness, and low filling ratio.
3. **Limitations of existing materials**: Although existing carbon - based materials are lightweight and have excellent conductive properties, they are usually prepared from non - renewable fossil fuel precursors, which do not meet the requirements of sustainable development.

### Solutions:
- **Material design**: Utilize biomass - derived carbon materials as low - cost, resource - rich, and sustainable electromagnetic wave - absorbing materials.
- **Structural optimization**: Optimize impedance matching and electromagnetic absorption performance by adjusting the pore structure, introducing magnetic components (such as Fe₃S₄), and combining with dielectric - type materials.
- **Synergistic effect**: Realize the synergistic effect between dielectric loss and magnetic loss to improve the electromagnetic wave - absorbing performance.

### Research objectives:
- Prepare Fe₃S₄@C composite materials with excellent electromagnetic wave - absorbing performance.
- Verify its radar cross - section (RCS) suppression ability in practical applications through experiments.
- Explore the potential of Fe₃S₄ and biomass - carbon composite materials in the field of electromagnetic wave absorption.

### Experimental methods:
1. **Material preparation**: Synthesize Fe₃S₄@C composite materials through a simple pyrolysis process and hydrothermal method.
2. **Performance testing**: Characterize the crystal structure, morphology, and chemical composition of the materials by means of XRD, Raman spectroscopy, SEM, TEM, etc.; measure the electromagnetic parameters by a vector network analyzer; simulate the radar cross - section (RCS) using CST software.

### Experimental results:
- The prepared Fe₃S₄@C composite materials exhibit excellent electromagnetic wave - absorbing performance, with a minimum reflection loss (RL) of - 58.85 dB and an effective bandwidth (EBW) of 5.4 GHz.
- The RCS simulation results show that this material can effectively suppress electromagnetic waves in practical applications.

### Conclusion:
This research has successfully developed a new type of Fe₃S₄@C composite material, which not only realizes the synergistic effect between dielectric loss and magnetic loss but also improves the electromagnetic wave - absorbing performance of biomass - carbon materials, providing new ideas for the design of high - performance electromagnetic wave - absorbing materials.