Abstract:Phase-transformations and microstructural evolution during and after inter-critical annealing of a low-alloy, dual-phase steel are studied utilizing dilatometric measurements, and microstructural characterization methods, including scanning electron microscopy, synchrotron X-ray diffraction, and atom-probe tomography. Dilatometric measurements reveal that the sample contains ~72% austenite, after annealing for 5-min at 871 oC, which agrees with the water-quenched microstructure, and ~90% after further annealing to 1 h, which agrees with thermodynamic predictions. A continuous-cooling transformation (CCT) diagram is constructed, within the cooling-rate range between 1 oC/s and 70 oC/s. The incubation time for the ferrite-transformation is <1 s, after inter-critical annealing, and the secondary-phases are mainly pearlite for cooling-rates of <5 oC/s, and martensite for cooling-rates >10 oC/s, which is confirmed utilizing scanning electron-microscope observations. The microhardness increases as the cooling rate increases, and an abrupt slope-change is explained by the major secondary-phase changing from martensite to pearlite between 5 oC/s and 10 oC/s. Atom-probe tomography demonstrates the coexistence of martensite and pearlite as secondary-phases for 30 oC/s and a switch in austenite-ferrite transformation mechanisms from para-equilibrium (70 oC/s) to partitioning local-equilibrium (30 oC/s). A microstructural map is constructed to reveal the austenite decomposition products in the cooling-rate range between 1 oC/s and 70 oC/s. Based on composition measurements of the matrix, utilizing APT, the effects of cooling-rates on solid-solution-strengthening are estimated, and the results demonstrate that solid-solution strengthening, especially carbon-redistribution, accounts for the majority of the strength variations due to different cooling-rates. (239 words)

Crystallographic Features of Phase Transformations in High-Strength Low-Carbon Pipe Steel

Features of Phase Transformations in Martensitic Class Steel for Oil Grade High-Strength Corrosion-Resistant Pipes

Formation of Structure and Properties of Low-Carbon Pipe Steel with Ultralow Manganese Content during Thermomechanical Treatment

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

EFFECT OF ACCELERATED COOLING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CONTROLLED ROLLED PIPE LINE STEELS

Annealing twin mechanism for 304 stainless steel solution treatment process

Effect of Coiling Temperature on Microstructures and Precipitates in High-Strength Low-Alloy Pipeline Steel after Heavy Reduction during a Six-Pass Rolling Thermo-Mechanical Controlled Process

FEATURES OF MICROSTRUCTURE FORMATION IN THE WELDED PIPE JOINTS DURING HIGH-FREQUENCY WELDING AND SUBSEQUENT LOCAL HEAT TREATMENT

Microstructure Regulation and Mechanical Properties of Low-Carbon Multiphase Steels

Analysis of phase transformation thermodynamics and kinetics and its relationship to structure-mechanical properties in a medium-Mn high strength steel

Early Martensitic Transformation in a 0.74C–1.15Mn–1.08Cr High Carbon Steel

The austenite to polygonal ferrite transformation in low-alloy steel: multi-phase-field simulation

Crystallographic Characteristics of Phase Transformations in the Field of Medium-Carbon Steels of a Joint Obtained by Rotational Friction Welding

Experimental Research and Manufacturing Technology of Heavy Gauge WPHY-80 Pipe Fitting Plate with Uniform Microstructure

Effect of heat treatment on the microstructure and mechanical properties of a low-carbon X80 pipeline steel

Microstructure and properties of X100 large-deformability pipeline steel based on heating on-line partitioning

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Effect of Deformation and Cooling Rate on the Transformation Behavior and Microstructure of X70 Steels

Tracing Phase Transformation And Lattice Evolution In A Trip Sheet Steel Under High-Temperature Annealing By Real-Time In Situ Neutron Diffraction

Phase-field Modeling of Cyclic Phase Transformations in Low-Carbon Steels

Experimental and Numerical Study on Strain Path and Crystal Orientation Dependences of Phase Transformation Behaviors of QP1180 Steel