Abstract:This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO2 (scCO(2))-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 x 800 x 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO(2)). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO(2) and showed that the variations in the relative permeability curves for both water and scCO(2) increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. The impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

Investigation of Compaction and Sand Migration Effect on Permeability and Non-Darcy Coefficient With Pore-Scale Simulations

Inversion Calculation of Permeability Coefficient with the Multi-Scale Asymptotic Expansion Method

Predicting the Permeability Coefficient of Polydispersed Sand Via Coupled CFD–DEM Simulations

The Role of the Spatial Heterogeneity and Correlation Length of Surface Wettability on Two-Phase Flow in a CO2-water-rock System

Nonlinear and non-local analytical solution for Darcy–Forchheimer flow through a deformable porous inclusion within a semi-infinite elastic medium

Gas transport in partially-saturated sand packs

Pore-scale modelling of particle migration in loose sandstone

Experimental Study on the Dilatancy Characteristics and Permeability Evolution of Sandstone under Different Confining Pressures

The Effect of Mineral Dissolution on the Effective Stress Law for Permeability in a Tight Sandstone

Evolution of pore structure during fines migration in sand pack: NMR experimental and numerical investigations

Pore-scale Simulation of Gas-Water Flow in Low Permeability Gas Reservoirs

Pore-scale Analysis of CO2-brine Displacement in Berea Sandstone and Its Implications to CO2 Injectivity

Inertial Effects during the Process of Supercritical CO2 Displacing Brine in a Sandstone: Lattice Boltzmann Simulations based on the Continuum‐surface‐force and Geometrical Wetting Models

Pore-scale modeling of flow in particle packs containing grain-coating and pore-filling hydrates: Verification of a Kozeny–Carman-based permeability reduction model

Pressure Behavior Analysis of Permeability Changes Due to Sand Production in Offshore Loose Sandstone Reservoirs Using Boundary-Element Method

Klinkenberg Slippage Effect in the Permeability Computations of Shale Gas by the Pore-scale Simulations

A Semi-analytical Model for Pressure-Dependent Permeability of Tight Sandstone Reservoirs

Gas Migration in the Reservoirs of Ultra-Low Porosity and Permeability Based on an Improved Apparent Permeability Model

Compaction Effects on Permeability of Spherical Packing

Experimental and numerical modelling of the mechanical behaviour of low-permeability sandstone considering hydromechanics

Relative Permeability Calculations from Two-Phase Flow Simulations Directly on Digital Images of Porous Rocks