Ultrasensitive and versatile hydrogen peroxide sensing via fluorescence quenching

Jenisha John Peter,Nathaniel Chennattuparambil Roy,Flavio Grynszpan,Mindy Levine

DOI: https://doi.org/10.1039/d4cc03020f

IF: 4.9

2024-01-01

Chemical Communications

Abstract:Hydrogen peroxide sensing via fluorescence quenching of a substituted bimane occurs independently of the bimane-water reaction, enabling picomolar detection limits.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Attractive benzothiazole-based fluorescence probe for the highly efficient detection of hydrogen peroxide

Jiyu Tang,Fuling Li,Chang Liu,Jun Shu,Jian Yue,Bin Xu,Xiaoqiang Liu,Kaiming Zhang,Weidong Jiang

DOI: https://doi.org/10.1016/j.aca.2022.339939

IF: 6.911

2022-01-01

Analytica Chimica Acta

Abstract:In current work, one novel benzothiazole-based fluorescent chemosensor (TZ-BO) with ESIPT luminescence mechanism was designed for the detection of hydrogen peroxide (H2O2) as typical reactive oxygen species (ROS). The boronate catenary in our designed probe molecule TZ-BO is both the blocking group of ESIPT and the reactive group of H2O2. The synthesized probe TZ-BO has the advantages of large Stokes shift, high sensitivity, good selectivity, and fast reaction speed to H2O2. The ability of the probe to detect H2O2 in aqueous media and exogenous H2O2 in cells by fluorescence signal was investigated. The experimental results manifested that probe TZ-BO is able to sensitively detect H2O2 using a fluorescence method in an excellent linear range of H2O2 concentration from 0 to 60 μM (R2 = 0.994). The detection limit was determined as 1.0 × 10−6 M. Most importantly, the probe TZ-BO with highly low cytotoxicity can effectively detect exogenous H2O2 in HeLa cells. This probe provides a promising tool for monitoring the real concentration level of H2O2 in related physiological and pathological researches.
A Ratiometric Fluorescent Probe for Sensing Hydrogen Peroxide Based on A Hemicyanine-Naphthol Fluorophore

Yingjie Lei,Cong Xue,Sichun Zhang,Yaowu Sha

DOI: https://doi.org/10.1002/bio.3008

IF: 2.613

2015-01-01

Luminescence

Abstract:The synthesis, properties and applications of a water-soluble boronate-functioned hemicyanine-naphthol hybrid as a novel ratiometric fluorescent sensor for hydrogen peroxide are presented. The dye displayed remarkable a colour change from pale orange ((em)=590nm) to pink ((em)=690nm) in the presence of H2O2, which could be rationalized by the chemoselective H2O2-mediated transformation of arylboronate to phenolate with high selectivity and a fast response (within 2min). A good linear relationship (R-2=0.9951) was obtained with the H2O2 concentration ranging from 0 to 25M, with a limit of detection of 0.09M according to the signal-to-noise ratio (S/N=3). The advantages of this fluorophore include easy modification, excellent aqueous solubility and superior photostability, and it has been applied to the detection of trace amounts of hydrogen peroxide in water samples. Copyright (c) 2015 John Wiley & Sons, Ltd.
Detection of Few Hydrogen Peroxide Molecules Using Self-Reporting Fluorescent Nanodiamond Quantum Sensors

Yingke Wu,Priyadharshini Balasubramanian,Zhenyu Wang,Jaime A. S. Coelho,Mateja Prslja,Reiner Siebert,Martin B. Plenio,Fedor Jelezko,Tanja Weil

DOI: https://doi.org/10.1021/jacs.2c01065

IF: 15

2022-06-23

Journal of the American Chemical Society

Abstract:Hydrogen peroxide (H2O2) plays an important role in various signal transduction pathways and regulates important cellular processes. However, monitoring and quantitatively assessing the distribution of H2O2 molecules inside living cells requires a nanoscale sensor with molecular-level sensitivity. Herein, we show the first demonstration of sub-10 nm-sized fluorescent nanodiamonds (NDs) as catalysts for the decomposition of H2O2 and the production of radical intermediates at the nanoscale. Furthermore, the nitrogen-vacancy quantum sensors inside the NDs are employed to quantify the aforementioned radicals. We believe that our method of combining the peroxidase-mimicking activities of the NDs with their intrinsic quantum sensor showcases their application as self-reporting H2O2 sensors with molecular-level sensitivity and nanoscale spatial resolution. Given the robustness and the specificity of the sensor, our results promise a new platform for elucidating the role of H2O2 at the cellular level.

chemistry, multidisciplinary
Ultra-sensitive detection of hydrogen peroxide and levofloxacin using a dual-functional fluorescent probe

Yongqiang Shi,Qicong Wu,Wenting Li,Lei Lin,Fangfang Qu,Chenjia Shen,Yuzhen Wei,Pengcheng Nie,Yong He,Xuping Feng

DOI: https://doi.org/10.1016/j.jhazmat.2022.128605

IF: 13.6

2022-06-01

Journal of Hazardous Materials

Abstract:Herein, a flower-shaped fluorescent probe was proposed for hydrogen peroxide (H2O2) and levofloxacin (LVF) sensing based on MoOx QDs@Co/Zn-MOFs with porous structure. Both MoOx QDs and Co/Zn-MOFs exhibited peroxidase-like properties, and the combination of them greatly aroused the synergistic catalytic capabilities between them. In o-Phenylenediamine (OPD)-H2O2 system, MoOx QDs@Co/Zn-MOFs efficiently catalyzed H2O2 to produce •OH and then oxidized OPD to its oxidation product (OxOPD). The OxOPD could not only emit blue fluorescence, but also inhibit the fluorescent intensity of MoOx QDs through fluorescence resonance energy transfer (FRET). Moreover, when introducing LVF into the system, the fluorescent intensities of MoOx QDs increased along with the aggregation of themselves while that of OxOPD remained unchanged, which was explained by the joint behavior of FRET and photo-induced electron transfer (PET) instead of the conventional aggregation-induced emission enhancement (AIEE). With these observation, the proposed probe was employed for H2O2 and LVF determination in biological samples with the limit of detection (LOD) of 32.60 pmol/L and 0.85 μmol/L, respectively, suggesting the method holds great promises for trace H2O2 and LVF monitoring in eco-environment.

environmental sciences,engineering, environmental
Fully-reversible optical sensor for hydrogen peroxide with fast response.

Longjiang Ding,Siyu Chen,Wei Zhang,Yinglu Zhang,Xu-Dong Wang

DOI: https://doi.org/10.1021/acs.analchem.8b01159

IF: 7.4

2018-01-01

Analytical Chemistry

Abstract:A fully reversible optical sensor for hydrogen peroxide with fast response is presented. The sensor was fabricated by in situ growing ultrasmall platinum nanoparticles (PtNPs) inside the pores of fibrous silica particles (KCC-1). The nanocomposite was then embedded into a hydrogel matrix and form a sensor layer, the immobilized PtNPs can catalytically convert hydrogen peroxide into molecular oxygen, which is measured via luminescent quenching based oxygen sensor underneath. Owing to the high porosity and permeability of KCC-1 and high local concentration of PtNPs, the sensor exhibits fast response (less than 1 min) and full reversibility. The measurement range of the sensor covers 1.0 mu M to 10.0 mM, and a very small amount of sample is required during measurement (200 mu L). Because of its high stability, excellent reversibility and selectivity, and extremely fast response, the sensor could fulfill all industry requirements for real-time measurement and fill market vacancy.
A Highly Sensitive and Reproducible Fluorescence Sensor for Continuously Measuring Hydrogen Peroxide at the Sub-Ppm Level.

Yang,Rui Jiang,En-lai Yang,Jiahao Liang,Ying Xu,Xu-dong Wang

DOI: https://doi.org/10.1039/d4an00975d

2024-01-01

Abstract:A highly sensitive fluorescence sensor for monitoring low concentrations of hydrogen peroxide was designed. The sensor employs the commercially available palladium or platinum metal on activated charcoal as catalysts to decompose hydrogen peroxide into water and molecular oxygen. The produced oxygen concentration can be measured in real time using an oxygen-sensitive layer doped with photostable oxygen probes. The sensor exhibits high sensitivity that is able to measure hydrogen peroxide concentration down to 20 ppb and can measure hydrogen peroxide concentration in the range of 0.1-100 ppm and 0.02-100 ppm, respectively. The response is fully reversible and the typical response time is less than one minute, which makes it suitable to continuously measure hydrogen peroxide over a long duration. Due to the excellent batch-to-batch consistency of palladium or platinum metal on activated charcoal, the sensor can be massively produced with good reproducibility and affordable price, which holds great potential for constructing sensors for industrial and practical applications. Highly sensitive and reversible fluorescence H2O2 sensor with a limit of detection of 0.02 ppm had been developed. The sensor responded rather fast, had high stability, and can be massively produced with good batch-to-batch consistency.
Hemin@carbon Dot Hybrid Nanozymes with Peroxidase Mimicking Properties for Dual (colorimetric and Fluorometric) Sensing of Hydrogen Peroxide, Glucose and Xanthine

Li Su,Yexi Cai,Liang Wang,Wenpei Dong,Guojiang Mao,Ye Li,Mingsheng Zhao,Yanhua Ma,Hua Zhang

DOI: https://doi.org/10.1007/s00604-019-4103-4

2020-01-01

Mikrochimica Acta

Abstract:The multifunctional hemin@carbon dot hybrid nanozymes (hemin@CD) with simultaneous peroxidase-like activity and fluorescence signalling property was prepared for the first time. Based on these properties, hemin@CD was applied to develop a dual-channel fluorescent probe for H2O2 and H2O2-based biocatalytic systems. By virtue of the peroxidase-like activity, hemin@CD can catalyze the oxidative coupling of 4-aminoantipyrine with phenol in the presence of H2O2 to form a pink-red quinoneimine dye with a maximum absorbance at 505 nm. Under the excitation wavelength of 480 nm, the green fluorescence of hemin@CD peaks at 540 nm and is quenched by the generated quinoneimine dye due to an inner filter effect, and also by H2O2 because of dynamic quenching. Thus, a colorimetric and fluorimetric dual-channel optical probe for H2O2 is obtained. Due to the glucose/xanthine transformations under formation of H2O2 by the relevant oxidase catalysis, the probe can be applied for detection of glucose and xanthine. The colorimetric detection limits for H2O2, glucose and xanthine are 0.11, 0.15, 0.11 μM, and the and fluorimetric detection limits are 0.15, 0.15, 0.12 μM, respectively.
Near-infrared fluorescence probe for hydrogen peroxide detection: design, synthesis, and application in living systems

Jiahang Zhang,Liang Shi,Zhao Li,Dongyu Li,Xinwei Tian,Chengxiao Zhang

DOI: https://doi.org/10.1039/c9an00385a

2019-06-07

Abstract:Using fluorescent probes to detect endogenous hydrogen peroxide, which is associated with many diseases in the human body, remains an essential technique. Cyanine fluorochromes are a class of dyes that have attracted much attention and are widely used in the synthesis of fluorescent probes. In this article, a novel near-infrared (NIR) fluorescence probe for the detection of hydrogen peroxide was constructed and successfully applied to imaging endogenous hydrogen peroxide in vivo. Notably, probe 1 was designed by connecting 4-(bromomethyl)benzeneboronic acid pinacol ester as the sensing unit to the IR-780 hemicyanine skeleton, which exhibits excellent properties like NIR fluorescence emission over 700 nm. Probe 1 has satisfactory sensitivity to hydrogen peroxide with a low detection limit of 0.14 μM (S/N = 3), attributed to a responding mechanism that leads to the oxidation of phenylboronic acid pinacol ester and thereby releases fluorophore 2. Moreover, probe 1 displays excellent selectivity towards hydrogen peroxide over other substances. Taking advantage of these properties, the probe proved to be cell-permeable. Based on the results of N-acetylcysteine and rotenone together, probe 1 is capable of clearly visualizing endogenously produced hydrogen peroxide in living HepG2 cells and mice. The superior performance of the probe, as a reliable chemical tool, makes it of great potential application for exploring the role played by hydrogen peroxide in biological systems.
Ultra-Sensitive Hydrogen Peroxide Sensor Based on Peroxiredoxin and Fluorescence Resonance Energy Transfer

Haijun Yu,Haoxiang Li,Yao Zhou,Shengmin Zhou,Ping Wang

DOI: https://doi.org/10.3390/app10103508

2020-01-01

Applied Sciences

Abstract:In this paper, a fluorescence resonance energy transfer (FRET)-based sensor for ultra-sensitive detection of H2O2 was developed by utilizing the unique enzymatic properties of peroxiredoxin (Prx) to H2O2. Cyan and yellow fluorescent protein (CFP and YFP) were fused to Prx and mutant thioredoxin (mTrx), respectively. In the presence of H2O2, Prx was oxidized into covalent homodimer through disulfide bonds, which were further reduced by mTrx to form a stable mixed disulfide bond intermediate between CFP-Prx and mTrx-YFP, inducing FRET. A linear quantification range of 10–320 nM was obtained according to the applied protein concentrations and the detection limit (LOD) was determined to be as low as 4 nM. By the assistance of glucose oxidase to transform glucose into H2O2, the CFP-Prx/mTrx-YFP system (CPmTY) was further exploited for the detection of glucose in real sample with good performance, suggesting this CPmTY protein sensor is highly practical.
Oxazole-based High Resolution Ratiometric Fluorescent Probes for Hydrogen Peroxide Detection

Xihui Li,Jiaming Li,Yuhan Tao,Zhixing Peng,Ping Lu,Yanguang Wang

DOI: https://doi.org/10.1016/j.snb.2017.03.060

IF: 9.221

2017-01-01

Sensors and Actuators B Chemical

Abstract:Hydrogen peroxide (H2O2) has been associated as the most important member of reactive oxygen species (ROS) for a long time. Two novel fluorescent probes (P1 and P2) are synthesized and characterized for rapid detection of H2O2. In the presence of base, the probes provide remarkable changes in optical properties with extremely fast response towards H2O2 based on the cleavage of C-O bond and the principle of excited state intramolecular proton transfer (ESIPT) or photo-induced electron transfer (PET). (C) 2017 Published by Elsevier B.V.
Expedite Fluorescent Sensor Prototype for Hydrogen Peroxide Detection with Long-Life Test Substrates

Qianqian Chen,Li Yang,Keke Guo,Jialin Yang,Ji-Min Han

DOI: https://doi.org/10.1021/acsomega.1c00471

IF: 4.1

2021-01-01

ACS Omega

Abstract:We report a practical fluorescent sensor device for the trace amount detection of hydrogen peroxide vapor. In this paper, we have significantly improved the performance of fluorescence analysis for the detection of peroxides by solving the problems of packaging and storage of active materials and transferring the chemical experiment phenomenon to the actual project output. The fluorescent sensor molecule, test substrates, mixing methods, and the way to improve the life time are carefully studied. Combined with the design of circuit and programming, a field-test prototype was designed for peroxide explosives and its performance and algorithm were screened and optimized. In the detection of traces of H2O2 generated by ultraviolet separation or leaked as inherent impurities, the high-efficiency and rapid detection of peroxide-based explosives is achieved. The detection limit of H2O2 is expected to reach 2 ppb, and the response time can reach <0.5 s.
Highly sensitive and reproducible fluorescence sensor for continuously measuring hydrogen peroxide at sub-ppm level

Yang Yang,Rui Jiang,En-lai Yang,Jiahao Liang,Ying Xu,Xu-Dong Wang

DOI: https://doi.org/10.1039/d4an00975d

2024-09-29

The Analyst

Abstract:A highly sensitive fluorescence sensor for monitoring low concentrations of hydrogen peroxide was designed. The sensor employs the commercially available palladium or platinum metal on activated charcoal as catalysts to decompose hydrogen peroxide into water and molecular oxygen. The produced oxygen concentration can be measured in real time by an oxygen-sensitive layer doped with photostable oxygen probes. The sensor exhibits high sensitivity that is able to measure hydrogen peroxide concentration down to 20 ppb, and can measure hydrogen peroxide concentration in the range of 0.1-100 ppm and 0.02-100 ppm respectively. The response is fully reversible and the typical response time is less than one minute, which makes it suitable to continuously measure hydrogen peroxide over a long duration. Due to the excellent batch-to-batch consistency of palladium or platinum metal on activated charcoal, the sensor can be massively produced with good reproducibility and affordable price, which holds great potential for constructing sensors for industrial and practical applications.

chemistry, analytical
A sensitive hydrogen peroxide biosensor using ultra-small CuInS 2 nanocrystals as peroxidase mimics

hongying liu,chunchuan gu,weiwei xiong,mingzhen zhang

DOI: https://doi.org/10.1016/j.snb.2014.12.052

2015-01-01

Abstract:•Fluorescent CuInS2 nanocrystals are synthesized by microwave-assisted method.•As a mimic peroxidase, CuInS2 nanocrystals exhibited good catalytic properties.•A sensitive and selective approach for the detection of H2O2 was developed.
Ultrasensitive Detection of Hydrogen Peroxide Using Bi 2 Te 3 Electrochemical Sensors

Fujia Zhao,Shan Zhou,Yingjie Zhang

DOI: https://doi.org/10.1021/acsami.0c19911

2021-01-14

Abstract:Electrochemical sensors, with high accuracy, good selectivity, and linear response, have been widely used for environmental protection, health monitoring, and disease treatment. However, to date, these sensors still have limit sensitivity or otherwise require the use of high-cost materials such as noble metals and enzymes. Here, we report a novel electrochemical sensor using a topological insulator, Bi2Te3. Through liquid-phase exfoliation, we prepared nano- and microflakes of Bi2Te3 and measured their performance in hydrogen peroxide sensing via electrocatalytic reduction processes. Our devices exhibit a sensitivity of ∼4900 μA mM-1 cm-2 and a detection limit of ∼10-8 molar, both of which are superior to typical noble metal-based electrochemical sensors. Through electrochemical analysis and microkinetic simulations, we extracted the kinetic parameters and gained insights into the reaction mechanism. We attribute the ultrahigh sensitivity to the facile electron transfer at the Bi2Te3-aqueous solution interface.

materials science, multidisciplinary,nanoscience & nanotechnology
Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme–induced self-ligand emission

Jingjing Guo,Yangyang Liu,Zhao Mu,Shu Wu,Jueyu Wang,Yue Yang,Min Zhao,Yan Wang

DOI: https://doi.org/10.1007/s00604-022-05313-6

IF: 5.7

2022-01-01

Microchimica Acta

Abstract:A bifunctional Ni-MOF nanosheet was synthesized and developed for label-free fluorescent detection of H 2 O 2 and glucose. The Ni-MOF exhibited intrinsic peroxidase-like activity and its catalytic activity was demonstrated to be originated from the hydroxyl radicals (•OH) produced in catalytic process. Since the generated •OH enabled terephthalic acid, the non-fluorescent organic ligand of Ni-MOF, to form a strongly fluorescent 2-hydroxy terephthalic acid, the Ni-MOF nanozyme was endowed with dual-function properties of mimicking peroxidase and emitting fluorescence. Based on this bifunctional Ni-MOF nanozyme, the proposed label-free fluorescence sensing strategy was applied to detecting H 2 O 2 and glucose with wide linear ranges of 0.1–20 mM and 8–30 μM, and low detection limits of 4.0 × 10 −5 M and 4.0 × 10 −6 M, respectively. Furthermore, the bifunctional Ni-MOF-based label-free sensing platform was successfully used for the glucose detection in human serum samples, showing good reproducibility and high accuracy. This strategy provides a green and sensitive method for the determination of small biomolecules in practical applications by the combination of enzyme cascade reaction. Graphical abstract
Detection of Hydrogen Peroxide with Fluorescent Dyes

Flávia Rezende,Ralf P. Brandes,Katrin Schröder

DOI: https://doi.org/10.1089/ars.2017.7401

2018-08-20

Antioxidants and Redox Signaling

Abstract:SIGNIFICANCE: Hydrogen peroxide (H2O2) is a powerful effector of redox signaling. It is able to oxidize cysteine residues, metal ion centers, and lipids. Understanding H2O2-mediated signaling requires, to some extent, measurement of H2O2 level. Recent Advances: Chemically and genetically encoded fluorescent probes for the detection of H2O2 are currently the most sensitive and popular. Novel probes are constantly being developed, with the latest progress particular with boronates and genetically encoded probes.CRITICAL ISSUES: All currently available probes display limitations in terms of sensitivity, local and temporal resolution, and specificity in the detection of low H2O2 concentrations. In this review, we discuss the power of fluorescent probes and the systems in which they have been successfully employed. Moreover, we recommend approaches for overcoming probe limitations and for the avoidance of artifacts.FUTURE DIRECTIONS: Constant improvements will lead to the generation of probes that are not only more sensitive but also specifically tailored to individual cellular compartments. Antioxid. Redox Signal. 29, 585-602.
Real-time photoelectrochemical quantification of hydrogen peroxide produced by living cells

Fang Xin Hu,Jianwei Miao,Chunxian Guo,Hong Bin Yang,Bin Liu

DOI: https://doi.org/10.1016/j.cej.2020.127203

IF: 15.1

2021-03-01

Chemical Engineering Journal

Abstract:Real-time selective and quantitative detection of hydrogen peroxide (H2O2) released by living cells is essential to understand its roles in cellular physiology. However, it is still a great challenge to monitoring H2O2 due to the low concentration and various biological interferences. Herein, this work demonstrates a novel p-type semiconductor-based photoelectrochemical (PEC) sensor to effectively trigger H2O2 reduction to dramatically exclude the interferences of other reactive species that co-exist in the biosystem. CuO, one of the few metal oxides with natural p-type conductivity from copper vacancy, is selected as the most promising photocathode candidate, which exhibits enhanced light harvesting and electron-hole separation. Upon visible-light irradiation, the CuO nanoflower PEC sensor achieved a H2O2 detection limit of 66.7 nM, which is ~23 times superior to the value obtained from the electrochemical method. The mechanism of enhanced sensing performance was meticulously investigated by UV–vis, FTIR spectroscopy, Mott-Schottky characterization and photoelectrochemical measurements. Results reveal the suitable energy level matching between the band structure of p-type CuO nanoflower and H2O2 reduction ensures effective absorption of visible light with large driving force (~0.6 V) of photogenerated electrons to reduce H2O2 to OH−. Besides, the newly-developed CuO nanoflower PEC sensor realizes real-time monitoring of H2O2 released from living Hela cells, which provides an alternative method for scatheless assay of cell released reactive molecule detection and exhibits promising prospect in clinical diagnoses.

engineering, chemical, environmental
UV-Vis detection of hydrogen peroxide using horseradish peroxidase/copper phosphate hybrid nanoflowers

Chuankai Yang,Miaorong Zhang,Wei Wang,Yao Wang,Jianguo Tang

DOI: https://doi.org/10.1016/j.enzmictec.2020.109620

IF: 3.705

2020-10-01

Enzyme and Microbial Technology

Abstract:A colorimetric platform based on enzyme-inorganic hybrid nanoflowers was used for ultraviolet-visible detection of hydrogen peroxide (H2O2). The hybrid nanoflowers were prepared via incubation at room temperature using horseradish peroxidase (HRP) and copper phosphate (Cu3(PO4)2) as the organic and inorganic components, respectively. HRP/Cu3(PO4)2 hybrid nanoflowers (HRP-HNFs) showed linear H2O2 detection range from 100 nM to 100 µM, moreover, HRP-HNFs exhibited good selectivity for H2O2 detection due to the specificity of HRP. In addition, HRP-HNFs have good reusability, excellent color stability and long-term storage stability, which indicate HRP-HNFs are promising for catalysis and biomedical applications.

biotechnology & applied microbiology
An AIE-active fluorescence turn-on bioprobe mediated by hydrogen-bonding interaction for highly sensitive detection of hydrogen peroxide and glucose

Zhegang Song,Ryan T K Kwok,Dan Ding,Han Nie,Jacky W Y Lam,Bin Liu,Ben Zhong Tang

DOI: https://doi.org/10.1039/c6cc05049b

2016-08-21

Abstract:An AIE-active "turn-on" bioprobe is designed for hydrogen peroxide detection based on an imine-functionalized tetraphenylethene derivative. The linear fluorescence response enables quantification of hydrogen peroxide with superior sensitivity and selectivity. Meanwhile, glucose assay is also realized by taking advantage of GOx/glucose enzymatic reaction.
Dual Mechanism of an Intramolecular Charge Transfer (Ict)-Fret-based Fluorescent Probe for the Selective Detection of Hydrogen Peroxide

Xiao Liang,Xiaoyi Xu,Dan Qiao,Zheng Yin,Luqing Shang

DOI: https://doi.org/10.1002/asia.201701382

2017-01-01

Chemistry - An Asian Journal

Abstract:A dual-mechanism intramolecular charge transfer (ICT)-FRET fluorescent probe for the selective detection of H2O2 in living cells has been designed and synthesized. This probe used a coumarin-naphthalimide hybrid as the FRET platform and a boronate moiety as the recognition group. Upon the addition of H2O2, the probe exhibited a redshifted (73nm) fluorescence emission, and the ratio of fluorescence intensities at =558 and 485nm (F-558/F-485) shifted notably (up to 100-fold). Moreover, there was a good linearity (R-2=0.9911) between the ratio and concentration of H2O2 in the range of 0 to 60m, with a limit of detection of 0.28m (signal to noise ratio (S/N)=3). This probe could also detect enzymatically generated H2O2. Importantly, it could be used to visualize endogenous H2O2 produced by stimulation from epidermal growth factor.

Ultrasensitive and versatile hydrogen peroxide sensing via fluorescence quenching

Attractive benzothiazole-based fluorescence probe for the highly efficient detection of hydrogen peroxide

A Ratiometric Fluorescent Probe for Sensing Hydrogen Peroxide Based on A Hemicyanine-Naphthol Fluorophore

Detection of Few Hydrogen Peroxide Molecules Using Self-Reporting Fluorescent Nanodiamond Quantum Sensors

Ultra-sensitive detection of hydrogen peroxide and levofloxacin using a dual-functional fluorescent probe

Fully-reversible optical sensor for hydrogen peroxide with fast response.

A Highly Sensitive and Reproducible Fluorescence Sensor for Continuously Measuring Hydrogen Peroxide at the Sub-Ppm Level.

Hemin@carbon Dot Hybrid Nanozymes with Peroxidase Mimicking Properties for Dual (colorimetric and Fluorometric) Sensing of Hydrogen Peroxide, Glucose and Xanthine

Near-infrared fluorescence probe for hydrogen peroxide detection: design, synthesis, and application in living systems

Ultra-Sensitive Hydrogen Peroxide Sensor Based on Peroxiredoxin and Fluorescence Resonance Energy Transfer

Oxazole-based High Resolution Ratiometric Fluorescent Probes for Hydrogen Peroxide Detection

Expedite Fluorescent Sensor Prototype for Hydrogen Peroxide Detection with Long-Life Test Substrates

Highly sensitive and reproducible fluorescence sensor for continuously measuring hydrogen peroxide at sub-ppm level

A sensitive hydrogen peroxide biosensor using ultra-small CuInS 2 nanocrystals as peroxidase mimics

Ultrasensitive Detection of Hydrogen Peroxide Using Bi 2 Te 3 Electrochemical Sensors

Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme–induced self-ligand emission

Detection of Hydrogen Peroxide with Fluorescent Dyes

Real-time photoelectrochemical quantification of hydrogen peroxide produced by living cells

UV-Vis detection of hydrogen peroxide using horseradish peroxidase/copper phosphate hybrid nanoflowers

An AIE-active fluorescence turn-on bioprobe mediated by hydrogen-bonding interaction for highly sensitive detection of hydrogen peroxide and glucose

Dual Mechanism of an Intramolecular Charge Transfer (Ict)-Fret-based Fluorescent Probe for the Selective Detection of Hydrogen Peroxide