Abstract:Fabrication and Characterization of Hybrid Composites. Single fiber polymer composites containing either natural or artificial fibers may not deliver the desired characteristics. The current study used the hand‐layup technique to make a hybrid composite by incorporating the natural fiber, Cordia‐dichotoma (CD) and artificial fiber, carbon fibers (CF) in a polyester matrix and compressing the mixture for the desired size. The current study investigates the influence of carbon fiber loading (0, 5, 10, and 15 wt%) on the mechanical, structural, and crystalline properties of CD/polyester composites keeping the total fiber loading at 20 wt%. Mechanical properties are investigated with a universal testing machine, and impact strength using Izod impact apparatus. Better mechanical properties (tensile strength‐457.38 MPa; flexural strength‐290.09 MPa and impact strength‐346.46 J/m) were obtained for the pure carbon fiber composite arranged in four layers (CF/CF/CF/CF), followed by hybrid composite (CF/CD/CD/CF) (tensile strength‐319.24 MPa; flexural strength‐253.03 MPa and impact strength‐291.34 J/m) whereas pure CD fiber (CD/CD/CD/CD) composite yielded the lowest values (tensile strength‐117.96 MPa; flexural strength‐164.99 MPa and impact strength‐118.11 J/m). Composites undergo hybridization, which improves their mechanical properties, lowers their cost, and makes them more environmentally friendly. The characteristics of the specimens were examined using Fourier Transform Infrared Spectroscopy (FTIR), X‐ray Diffraction Analysis (XRD), Atomic Force Microscope (AFM), and Scanning Electron Microscopy (SEM). According to findings, crystallinity index is increased from 77.94% for CD/CD/CD/CD composite and increased to 78.21% for CF/CD/CD/CF composite. Highest crystallinity index of 82.46% was obtained for CF/CF/CF/CF composite. These hybrid composites may be used for applications involving medium loads. Highlights In this study, Cordia‐dichotoma natural fibers are extracted and treated with alkali (NaOH) to reduce the biodegradability. To lower the cost and enhance mechanical and biodegradable properties Carbon and cordia‐dichotoma fibers have been hybridized. Mechanical Properties such as tensile, flexural and impact properties are evaluated for the prepared hybrid composites. Hybrid composites were analyzed using FTIR, AFM, XRD, and SEM to assess their suitability to various applications.

Comparison of mechanical and physical behaviors of carbon/basalt/epoxy hybrid composite rod with carbon/glass/epoxy hybrid composite rod used in ACCC conductor core

Properties of Basalt Fiber Core Rods and Their Application in Composite Cross Arms of a Power Distribution Network

Preparation and properties of an aluminum conductor with an optical fibre multi-strand carbon-fibre composite core

Characteristics of Heat Resistant Aluminum Alloy Composite Core Conductor Used in overhead Power Transmission Lines

Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod

Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites

Flexural Properties of Carbon/Glass Hybrid Thermoplastic Epoxy Composite Rods Under Static and Fatigue Loadings

Modeling and experimental investigations of mechanical properties of hybrid composite rods with gradient composition

Efficiency Of Basalt Fiber Length And Content On Mechanical And Microstructural Properties Of Hybrid Fiber Concrete

Mechanical Evaluation on Carbon/Basalt Fiber-Reinforced Hybrid Polymer Matrix Composite

Comparison the Properties of Carbon Fiber-Based Portland Cement and Alkali-Activated Fly Ash/slag Conductive Cementitious Composites

Combined effects of sustained bending loading, water immersion and fiber hybrid mode on the mechanical properties of carbon/glass fiber reinforced polymer composite

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

Experimental investigations on the fatigue behavior of hybrid basalt/glass fiber epoxy composites

Experimental Study on Fabrication and Comparison of Mechanical Properties of Plain Weave Copper Mesh Embedded Hybrid Composite with E-Glass Fiber Reinforced Epoxy GFRP Composite

Enhancement of mechanical and structural characteristics through the hybridization of carbon fiber with Cordia‐dichotoma/polyester composite

Factor analysis on property enhancement of electrically/thermally conductive composites by continuous forced assembly

Water Uptake and Interfacial Shear Strength of Carbon/glass Fiber Hybrid Composite Rods under Hygrothermal Environments: Effects of Hybrid Modes

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Water Absorption and Long-Term Thermal and Mechanical Properties of Carbon/glass Hybrid Rod for Bridge Cable