Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Comparison of single- and hybrid-fiber composite laminates for use in prosthetic sockets

Strength Assessment of PET Composite Prosthetic Sockets

Preliminary Material Evaluation of Flax Fibers for Prosthetic Socket Fabrication

Jute-basalt reinforced epoxy hybrid composites for lightweight structural automotive applications

Fabrication and characterization of laminated natural fibers and SS303 wire mesh reinforced epoxy-based hybrid composite

Self-Reinforced Composite Materials: Frictional Analysis and Its Implications for Prosthetic Socket Design

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Exploring mechanical properties of eco-friendly hybrid epoxy composites reinforced with sisal, hemp, and glass fibers

Mechanical Evaluation on Carbon/Basalt Fiber-Reinforced Hybrid Polymer Matrix Composite

Development of biocomposites using novel green pea pod lignin and hybridized pod sheath fibre-bamboo epoxy composite for human prosthetic application

Investigations on the development of impact-resistant thermoplastic fibre hybrid composites from glass and steel fibre

Investigation of the mechanical properties and failure modes of hybrid natural fiber composites for potential bone fracture fixation plates

Characterizing tensile and flexural properties of synthetic fibers-reinforced epoxy composite for foot prosthetic application

Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Preliminary Study on Composite Hip Prostheses Made by Resin Transfer Molding

Short Jute Fiber Preform Reinforced Polypropylene Thermoplastic Composite: Experimental Investigation and Its Theoretical Stiffness Prediction

Characterization of flexural and compressive behavior in polylactic acid composites for low‐cost transtibial prosthetic applications: Influence of reinforcements

Physical and Mechanical Behavior of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites

Sustainable engineering applications using jute-basalt fiber reinforced composites: A material characterization study

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Effect of fibre hybridization and stacking sequence on the low velocity impact response of flax/basalt/aluminum composite-metal joints