Abstract:Titanium carbide (Ti3C2Tx) with a distinctive structure, abundant surface chemical groups, and good electrical conductivity has shown great potential in fabricating superior gas sensors, but several challenges, such as low response kinetics, poor reversibility, and serious baseline drift, still remain. In this work, γ-poly(l-glutamic acid) (γ-PGA) with a blocking effect is exploited to modify Ti3C2Tx, thereby stimulating the positive response behavior of Ti3C2Tx and improving its gas sensing performance. On account of the unique synergetic interaction between Ti3C2Tx and γ-PGA, the response of the flexible Ti3C2Tx/γ-PGA gas sensor to 50 ppm NO2has been improved to a large extent (average 1127.3%), which is 85 times that of Ti3C2Tx (only 13.2%). Moreover, the as-fabricated Ti3C2Tx/γ-PGA sensor not only exhibits a shorter response/recovery time (average 43.4/3 s) compared with the Ti3C2Tx-based sensor (∼18.5/18.3 min) but also shows good reversibility and repeatability (relative standard deviation (RSD) <1%) at room temperature within 50% relative humidity (RH). The improved gas sensing properties of the Ti3C2Tx/γ-PGA sensor can be attributed to the enhancement of effective adsorption and the blocking effect assisted by water molecules. Furthermore, the gas sensing response of the Ti3C2Tx/γ-PGA sensor is studied at different RHs, and humidity compensation of the sensor is carried out using the multiple regression method. This work demonstrates a novel strategy to enhance the gas sensing properties of Ti3C2Tx by γ-PGA modification and provides a new way to realize highly responsive gas detection at room temperature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssensors.1c00132?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssensors.1c00132</a>.Photographs of the fabrication process of MXene, Ti3C2Tx composite aqueous solutions, and the as-fabricated devices; schematic diagram of the testing system; SEM images of Ti3AlC2 and pristine γ-PGA; XPS spectra of Ti3C2Tx; I–V curves of the as-fabricated sensors; real-time resistance variation curves of devices 2 and 3 to 2–50 ppm NO2; dynamic response curves of Ti3C2Tx and Ti3C2Tx/γ-PGA-2 sensors for the various interfering gases; ambient humidity at 10 am every day for half a month; flexibility test; dynamic response curves of the Ti3C2Tx/γ-PGA-2 gas sensor at various RHs; response variation of the Ti3C2Tx/γ-PGA-2 gas sensor to 2–10 ppm NO2 at 28.8–79.3% RH; real-time resistance variation curves of MWCNTs and MWCNT/γ-PGA to 10–50 ppm NO2 at 50% RH; response curves of MWCNTs and MWCNT/γ-PGA gas sensors; flow configurations of different NO2 concentrations and RHs by MFCs; and gas sensing properties of the reported resistive-type NO2 gas sensors (<a class="ext-link" href="/doi/suppl/10.1021/acssensors.1c00132/suppl_file/se1c00132_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polar tri-glycol side chain for enhanced detection to low concentrations of NO 2 at room temperature

Flexible Resistive Gas Sensor Based on Molybdenum Disulfide-Modified Polypyrrole for Trace NO2 Detection

Harnessing the potential of porous carbon derived from chlorinated polyvinyl chloride as an effective gas analyte channel for NO 2 organic sensors

Recent achievements in conjugated polymer-based gas sensors by side-chain engineering

Effect of Hydroxyl Group in Polymeric Dielectric Layer on the Performance of Organic Thin-Film Transistors and Their Application for NO2 Gas Sensor

Enhancement of NO 2 Gas Sensing Properties of Polypyrrole by Polarization Doping with DBS: Experimental and DFT Studies

Enhanced Gas Sensing Characteristics of a Polythiophene Gas Sensor Blended with UiO‐66 via Ligand Functionalization

Polymer/Graphene oxide nanocomposite thin film for NO2 sensor: An in situ investigation of electronic, morphological, structural, and spectroscopic properties

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO<sub>2</sub> Sensing Response of SnO<sub>2</sub>

Enhanced Blocking Effect: A New Strategy to Improve the NO2 Sensing Performance of Ti3C2Tx by Γ-Poly(l-glutamic Acid) Modification.

A Flexible NO2 Gas Sensor Based on Polypyrrole/nitrogen-Doped Multiwall Carbon Nanotube Operating at Room Temperature

Studying the influence of thiophene derivatives on the difference between sorted semiconducting single-walled carbon nanotubes and ammonia sensing performance

Self-assembled Peptide Nanotubes (spnts)/sno2 Nanocomposites for High-Performance NO2 Sensing at Room Temperature

P3HT/surfactant Blend Films in Organic Thin-Film Transistors for High-Performance NO2 Detection

Ethylthio-substituted sandwich phthalocyaninato europium (III) semiconductors for sensing NO2 and NH3: Effect of the extended π-conjugate systems on tuning the conductivity and sensing behavior

A gas sensor based on polyhexylthiophene-carbon black for NO 2 detection

Chemresistive Detection of NO 2 of ppb Level in Humid Air at 350 K Using Azo-Spaced Polycroconamide

Phase separation of P3HT/PMMA blend film formed semiconducting and dielectric layers in organic thin-film transistors for high sensitivity NO2 detection.

Few-Layer PdSe 2 Nanofilm/Si Heterojunction for Sensing NO 2 at Room Temperature

Printed Thin-Film Transistors and NO2 Gas Sensors Based on Sorted Semiconducting Carbon Nanotubes by Isoindigo-Based Copolymer

Enhanced Blocking Effect: A New Strategy to Improve the NO 2 Sensing Performance of Ti 3 C 2 T x by γ-Poly( l -glutamic acid) Modification