Abstract:<section class="article-section__content"><p>This study discusses three conductive materials—carbon nanotube, graphene oxide, and montmorillonite which recently being used as fillers in membranes of fuel cell application and commonly hybridized with polymers as the matrix. The polymer electrolyte membrane fuel cell (PEMFC) is using a polymer‐based membrane as the electrolyte, which might require filler or functionalization to enhance their cell performance. This review provides brief information for the researcher who insists on improving the current PEM using these potential fillers, specified with required values of membrane properties measurement. It also entails the special features of the nanofillers concerning their chemical structure and electrochemical properties based on recent studies. As electricity is generated from an external fuel source, the membranes that are used should be more than 0.1 S/cm of proton conductivity, low fuel permeability (< 1.37 x 10<sup>−6</sup> cm<sup>2</sup>/s), cheap, and high stability in dry and wet condition. PEM is widely being utilized together with filler(s) incorporated as a purpose to overcome recent drawbacks encountered by the commercial Nafion membrane solely. Hence, the fillers embedded in the membrane are necessarily to have the promising characteristics, acknowledging the potential performances of three conductive nanofillers of (a) carbon nanotubes which is well‐known of its electrical conducting potential with three cylindrical design, (b) graphene oxide which is a reactive carbonaceous material with its multifunctional groups and (c) montmorillonite which is one of the clay types that has tetrahedral and octahedral layers of alumina‐silicates for producing better hybrid polymer electrolyte membrane. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>Carbon nanotube, graphene oxide, and montmorillonite are highly promising conductive fillers with outstanding cell performances based on previous studies.</li><li>Carbon nanotube, graphene oxide, and montmorillonite are chosen as incorporated fillers recently due to their rolling up direction (chirality vector of graphene sheet), reactive functional groups attached on the carbon atoms and ionic multilayers of the tetrahedral and octahedral sheet, respectively.</li><li>High proton conductivity, low electronic conductivity, low fuel permeability, low water transport, low production cost, and high mechanical stability in both dry and wet condition are properties that should be portrayed by a good hybrid membrane.</li></ul></section>

Highly Proton Conductive Membranes Based on Poly(vinylphosphonic acid)-Coated Cellulose Nanocrystals and Cellulose Nanofibers for Polymer Electrolyte Fuel Cells

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Alternative proton exchange membrane based on a bicomponent anionic nanocellulose system

Property Improvement of Nanocellulose‐reinforced Proton Exchange Nanocomposite Membrane Coated with Tetraethyl Orthosilicate

Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

Highly Ion-Conductive Anion Exchange Membranes with Superior Mechanical Properties Based on Polymeric Ionic Liquid Filled Functionalized Bacterial Cellulose for Alkaline Fuel Cells

Conductive polysaccharides-based proton-exchange membranes for fuel cell applications: The case of bacterial cellulose and fucoidan

Cross-Aligned PTFE Nanofiber Reinforced Composite Membrane for PEM Fuel Cells

Carbon nanotube, graphene oxide and montmorillonite as conductive fillers in polymer electrolyte membrane for fuel cell: an overview

Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells

Polymer electrolyte membrane based on PVA/LiClO4 nanocomposite reinforced cellulose nanocrystalline from corncob for lithium‐ion battery

Engineering Mesoporosity Promoting High-Performance Polymer Electrolyte Fuel Cells

A Sustainable and Eco-Friendly Membrane for PEM Fuel Cells Using Bacterial Cellulose

Composite membranes of Nafion and poly(styrene sulfonic acid)-grafted poly(vinylidene fluoride) electrospun nanofiber mats for fuel cells

Proton-Conducting Polymer-Coated Carbon Nanofiber Mats for Pt-Anodes of High-Temperature Polymer-Electrolyte Membrane Fuel Cell

Flexible Nanocellulose/Lignosulfonates Ion-Conducting Separators for Polymer Electrolyte Fuel Cells

Modified Nanocrystal Cellulose/fluorene-Containing Sulfonated Poly(ether Ether Ketone Ketone) Composites for Proton Exchange Membranes