Abstract:Inclusions are prevalent in both natural and synthetic materials. Gaining a comprehensive understanding of their dynamic response and interaction with the surrounding matrix is essential in fundamental mechanics and engineering applications. This study aims to achieve such understanding through theoretical analysis, experimental investigations, and numerical simulations, focusing on the dynamic destruction of inclusions and the underlying mechanisms. Firstly, the circumferential, radial, and shear stresses around elastic heterogeneous inclusions were derived by the wave function expansion and Duhamel integration methods. Subsequently, a set of experiments on sandstone specimens containing three types of inclusions (plaster, epoxy resin, cement) were conducted utilizing the Split Hopkinson Pressure Bar (SHPB) system in conjunction with high-speed photography and Digital Image Correlation (DIC) techniques to obtain the surface deformation of inclusion specimens. Eventually, a series of Finite Element Method (FEM) numerical simulations adopted suitable materials were also carried out to investigate the fracture process of inclusion and matrix under dynamic impact. The results demonstrate that the stress distributions and fracture mode of matrix and inclusion are highly dependent on the physical and mechanical properties of the inclusions and the surrounding matrix, specifically, density ρ , elastic modulus E , Poisson's ratio v , and strength. With an increase in the E and v , there is a reduction in the concentration of circumferential stress, while the radial and shear stresses experience an increase. The experimental and numerical results corroborated the theoretical findings and indicated that the localized dynamic stress concentrations induced by wave scattering around the inclusions directly dominated both local and overall specimen failure. Due to the dissimilarities in elastic parameters and strength between the inclusion and the matrix, the stress state of the inclusion and the interface is not homogeneous. Under dynamic loading, the weaker inclusion experiences tensile cracking at both ends of the loading, and as the mechanical properties ( ρ, E, v , and strength) of the inclusion rise, a transition from tensile- hybrid-shear failure occurs within the inclusion. The findings of this study help us understand the dynamic failure mechanisms of dissimilar inclusions in brittle material.

3D failure envelope of rigid inclusion reinforced foundations

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

BEM-ALEM Modeling of Plate–Soil Interaction for Rigid Circular Foundation in Layered Saturated Soils Subjected to Mechanical or Thermal Load

Centrifuge Study on Behavior of Rigid Pile Composite Foundation under Embankment in Soft Soil

Centrifugal Model Tests on Working Behavior of Composite Foundation Reinforced by Rigid Piles with Caps Under Embankment

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Finite Element Analysis of Rigid-Soft Composite Pile Foundation

Probabilistic failure envelopes of strip foundations on soils with non-stationary characteristics of undrained shear strength

Probabilistic undrained bearing capacity of shallow foundations under combined loading in three-dimensional spatially variable soils

Stability of composite foundation improved by rigid piles under embankment considering different failure modes of piles

Vertical Vibrations of a Rigid Foundation Embedded in a Poroelastic Half Space

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Analysis of Stability Against Upheaval for Foundation Pit with Anisotropic Soil Strength

Rupture sismique des fondations par perte de capacité portante: Le cas des semelles circulaires

Stability of conical foundations on anisotropic clay: A comprehensive three-dimensional study on V-H-M failure envelopes

Mechanical and Fracture Behaviors of Brittle Material with a Circular Inclusion: Insight from Infilling Composition

Fully assessing foundation failure envelopes under combined loads in spatially variable clay

Analytical 3D failure envelopes for RC pile groups under combined loading: A generalised design approach

Mechanical Response and Failure Mechanism of Circular Inclusion Embedded in Brittle Materials under Dynamic Impact

Stochastic Bearing Capacity and Failure Mechanism of Footings Placed Adjacent to Slopes considering the Anisotropic Spatial Variability of the Clay Undrained Strength

Three dimensional limit analysis of suction bucket foundations