Abstract:Damage caused to railway tracks and the surrounding environment during trains passage have become a real concern for those involved in the railway sector over the years. To find a solution for this problem, several approaches have already been implemented on railway tracks in some countries. Despite the efforts made in this area, the problem of ground vibration induced by railway traffic still remains a concern. Therefore, many studies have been focused on solutions to attenuate, even cancel vibrations effects on the track and nearby environment. This work has presented a modeling of a ballasted railway track with a shock-absorbing mat or Under Sleepers Rubber Mat (USRm) at the sleepers/ ballast interface. Using the equation of wave propagation in the ground and the constitutive law, the eigenfunctions of the displacement vector were determined. By coupling the equations of the track and those of the ground, the displacement, the velocity, and the acceleration of each track component, as well as the stress on the ground surface were expressed. The Newmark numerical method was used to represent these variables and to highlight the (USRm) influence on the dynamic behavior of the different track component. Comparison of the results obtained with the proposed railway model shows a reduction in vibration amplitudes of 64.9% and 94%for the rail, 86.5% and 56.25% for the sleepers. At the ground surface, the attenuation of vibration is evaluated at 53% and 6.85%, respectively for linear and nonlinear cases. The insertion of the shock-absorbing mat (USRm) in the railway track structure also reduces stress at the ground surface. The configuration of the railway track with a damping mat (USRm) therefore significantly reduces the transmitted vibration to the ground and to the nearby structures. It also contributes to the stability of the track and the improvement of its performance. The proposed railway track model with a shock-absorbing mat can be considered as a solution to reduce vibrations generated on track and the ground during trains passages.

Estimation of sleeper-ballast contact pressure based on fretting marks: field measurements and FEM modeling

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Interaction between Railroad Ballast and Sleeper: A DEM-FEM Approach

The Effect of Unsupported Sleepers/Bearers on Dynamic Phenomena of a Railway Turnout System under Impact Loads

Numerical investigation on loading pattern of railway concrete slabs

Experimental and numerical study on lateral resistance of frictional sleeper with arrowhead groove

Investigating influencing mechanisms of under-sleeper pads on lateral resistance of ballasted railway trackbed via hybrid DEM-FDM simulations

A numerical framework for modelling settlements of railway ballast layers

A computational fluid dynamics study of the influence of sleeper shape and ballast depth on ballast flight during passage of a simplified train

Influence of unsupported sleepers on the dynamic response of a heavy haul railway embankment

Comparative experimental investigation of the vibration mitigation characteristics of ballasted track using the rubber composite sleeper and concrete sleeper under various interaction forces

Micro-Analysis of Hanging Sleeper Dynamic Interactions with Ballast Bed

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast

Stress–Strain Analysis of Heavy Haul Rail Track with Steel Slag Ballast by Laboratory Tests and Numerical Simulations

Modeling of railway track integrating a shock-absorbing mat at the sleepers-ballast interface using eigenfunctions of displacement

The Influence of an Unsupported Sleeper on the Vertical Bearing Characteristics of Heavy-Haul Railway Ballast

Analytical Nonlinear Modeling of Rail and Fastener Longitudinal Response

The effect of Ballast Moisture Content and Fouling Index on Railway Track Settlement

An investigative study on the resistance characteristics and vertical stiffness of the novel recycled rubber composite sleeper in a ballasted track structure

Comparison of lateral resistance between I-shaped and X-shaped sleepers using finite element and discrete element coupling method