Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. The paper assesses the effect on the air flow regime underneath a simplified high-speed train of changing the ballast depth and the sleeper shape, with regard to its potential for causing ballast flight or pickup. The study was carried out numerically using the commercial Computational Fluid Dynamics (CFD) software AnSys Fluent. The flow profile beneath the underbody of the train was generated by means of a moving wall above the track. The Delayed Detached Eddy Simulation (DDES) with the SST [math] turbulence model was used to simulate turbulent flow, and the ballast bed roughness was applied parametrically using the wall roughness feature when resolving the boundary layer. CFD simulations were validated for flow over a cube, showing good agreement with experimental results. Up to three different depths to the ballast surface and three different sleeper profiles were investigated. Velocity profiles and aerodynamic forces on cubes placed between or on top of the sleeper blocks were used to assess the propensity of individual ballast grains for movement. For a standard G44 sleeper, increasing the ballast depth and/or the ballast bed roughness was found to reduce aerodynamic loads on an individual ballast grain. A ballast grain on top of the sleeper is more prone to uplift than a grain on the surface of the ballast bed in the crib. A curved upper surface to the sleeper is beneficial in that it prevents ballast from settling on top, the most vulnerable position. However, the reduced flow separation associated with the curved top may increase the likelihood of ballast pickup from the crib. Hence new sleeper shapes intended to reduce the potential for ballast flight should not only prevent ballast from settling on top, but also increase flow separation through the provision of a sharp surface. A prismatic sleeper shape that achieves both is suggested.

Comparison of lateral resistance between I-shaped and X-shaped sleepers using finite element and discrete element coupling method

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Experimental and numerical study on lateral resistance of frictional sleeper with arrowhead groove

Investigating influencing mechanisms of under-sleeper pads on lateral resistance of ballasted railway trackbed via hybrid DEM-FDM simulations

An investigative study on the resistance characteristics and vertical stiffness of the novel recycled rubber composite sleeper in a ballasted track structure

The Influence of an Unsupported Sleeper on the Vertical Bearing Characteristics of Heavy-Haul Railway Ballast

Interaction between Railroad Ballast and Sleeper: A DEM-FEM Approach

Micro-Analysis of Hanging Sleeper Dynamic Interactions with Ballast Bed

Influence of unsupported sleepers on the dynamic response of a heavy haul railway embankment

A computational fluid dynamics study of the influence of sleeper shape and ballast depth on ballast flight during passage of a simplified train

Comparative experimental investigation of the vibration mitigation characteristics of ballasted track using the rubber composite sleeper and concrete sleeper under various interaction forces

Evolution of Trackbed Performance and Ballast Degradation Due to Passages of Million Train Wheel Axle Loads

Discrete element modelling of under sleeper pads using a box test

Experimental study and numerical simulation of the impact of under-sleeper pads on the dynamic and static mechanical behavior of heavy-haul railway ballast track

Screw lateral restraint behaviour of timber and polymeric based railway sleepers

Effect of bending and compressive modulus of elasticity on the behaviour of timber-alternative railway sleepers supported by ballast

Acceleration Analysis on Track Structure with Ladder-Shaped Sleeper

Novel Bending Test Method for Polymer Railway Sleeper Materials

Bearing Properties and Stability Analysis of the Slope Protection Framework Using Recycled Railway Sleepers

The Effect of Unsupported Sleepers/Bearers on Dynamic Phenomena of a Railway Turnout System under Impact Loads