Abstract:International Journal of Aeroacoustics, Ahead of Print. The accurate prediction of the trailing-edge noise and the determination of its sources are essential to reduce fans and propellers noise. This noise component is due to the scattering of the turbulent boundary layer into acoustic waves by the trailing edge. In this paper, the noise emanating from a CD (Controlled-Diffusion) airfoil is simulated and computed via the hybrid methods of aeroacoustics. In these methods, the aerodynamic and acoustic fields are computed separately. The flow data are obtained using the in-house LES solver SFELES. ACTRAN acoustic solver has been used to solve the acoustics and to provide the near and far fields propagation via Lighthill's analogy. Curle's analogy is applied as well in its integral compact formulation which takes the presence of walls into account. Curle's formulation is applied proposing an approach where the volume and surface integrals have been implemented in SFELES to be calculated simultaneously with the flow in order to avoid the storage of noise sources which requires a huge space. In Lighthill's analogy, sources and near field maps show that the turbulent boundary layer and wake are the more efficient sources and the center of radiation is the trailing edge. The comparison of the numerical results with the experimental measurements, performed by Moreau and Roger and Moreau et al. , shows an overall excellent agreement confirming the capability of SFELES (LES sources) combined with ACTRAN (Lighthill's analogy) to predict correctly the noise generated by turbulent flows around airfoils. The acoustic spectrum presents an overprediction up to 5 dB at the frequencies 300 Hz and 550 Hz and an underprediction about 5 dB at the frequencies 1100 Hz and 1750 Hz. The sound pressure level (SPL) obtained using the proposed approach of Curle's analogy matches very well the experimental results. Thus, Curle's analogy can be used to obtain a fast, approximated and acceptable results about the noise radiation of airfoils avoiding the storage of noise sources which requires a huge space and time.

Resolvent model for aeroacoustics of trailing edge noise

Resolvent-based modeling of turbulent jet noise

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

On the Multiple Tones in Trailing Edge Noise of an Aerofoil at Low-to-moderate Reynolds Number Flows

The Control of Aerodynamic Sound Due to Boundary Layer Pressure Gust Scattering by Trailing Edge Serrations

Acoustic resolvent analysis of turbulent jets

Airfoil trailing-edge noise source identification using large-eddy simulation and wavelet transform

Characterization of pressure fluctuations within a controlled-diffusion blade boundary layer using the equilibrium wall-modelled LES

An Analysis on the Flow Field Structures and the Aerodynamic Noise of Airfoils with Serrated Trailing Edges Based on Embedded Large Eddy Flow Simulations

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

On the noise generated by a controlled-diffusion aerofoil at R e c = 1.5 × 10 5

CAA simulations of the leading edge noise of a heaving airfoil

Airfoil tonal noise reduction by roughness elements Part I -- Experimental investigation

Aerodynamic noise from rigid trailing edges with finite porous extensions

Trailing edge noise theory for rotating blades in uniform flow

High Accuracy Numerical Investigation of Trailing Edge Noise at Vortex Shedding Critical Angle of Attack

Active control of airfoil turbulent boundary layer noise with trailing-edge blowing

Experimental evidence on tonal noise generation and its control in tip-leakage flows

On the noise prediction for serrated leading edges

On Secondary Tones Arising in Trailing-Edge Noise at Moderate Reynolds Numbers