Abstract:BaTiO3 has advantages of high permittivity, low dielectric loss, low cost and environment friendly. However, due to the nonlinear dielectric behavior occurred around the phase transition temperature of BaTiO3 ceramic, its availability in the field of temperature-stable capacitor is limited. To modify the dielectric-temperature properties of BaTiO3, a series of BaTi1-xCexO3 (x=0-0.20) ceramics was synthesized by solid-state reaction method. Ce dopant was introduced into the B-site (Ti-site) of BaTiO3. The effects of Ce dopant on the phase evolution, defect state, microstructure and dielectric properties were investigated. The modifying mechanism was also discussed with the help of first-principles calculation method. In all ceramic samples, it is revealed that Ce element completely enters the B-site of BaTiO3 in the form of Ce4+ ion. With the increase of Ce doping concentration, the room temperature structure of BaTi1-xCexO3 ceramics transforms from tetragonal/pseudo-cubic structure into orthorhombic/tetragonal structure, then into pseudo-cubic structure. Owing to the radius difference between Ce4+ and Ti4+ ions, Ce doping will lead to the rising of lattice parameters, accompanied by the appearance of local distortion and the decrease of long-range ferroelectric order, the variation of band structure, density of states and charge density configuration, as well as the generation of Ba and Ti vacancies. Compared with pure BaTiO3 ceramic, the average grain size of Ce-doped ceramics decreases first and then increases with the increase of Ce content, while the relative density of ceramics increases gradually. The peak dielectric constant of BaTi1-xCexO3 ceramic increases first and then decreases as the Ce concentration increasing. The corresponding temperature is slowly reduced from 122 celcius to 112 celcius in the x value range of 0-0.08, then rapidly declines to -3 celcius in the x value range of 0.08-0.20. BaTi1-xCexO3 ceramics with x >= 0.06 have the dielectric behavior of diffused phase transition (DPT). And the x=0.20 ceramic exhibits the typical characteristic of relaxor ferroelectric, with the room temperature dielectric constant of 3258.38, and the |Delta epsilon(r)/epsilon(r25 celcius)|<= 22% temperature range of -60-87 celcius, which matches the requirement of EIA X5S standard. Therefore, it can be concluded that B-site Ce doping will effectively enhance the permittivity stability of BaTiO3 in a variable temperature environment. This will provide some new ideas to develop dielectric materials with stable dielectric properties in wide temperature range.

Optimizing the stability and electrical transport properties of CeNbO4+δ-based oxide ceramics by regulating oxygen ion content

Modulated Structure Determination and Ion Transport Mechanism of Oxide-Ion Conductor CeNbO4+δ.

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

Enhanced temperature range and stability in LaAlO 3 NTC ceramics through Ce-Nb codoping

Oxygen-vacancy-induced Reversible Control of Ferroelectric Polarization in Ba4Eu2Fe2Nb8O30 Ceramics

High-Entropy CeNbO4+δ-Based Ceramics with Ultrahigh Comprehensive Thermosensitive Performances

Experimental study and first-principles calculation of structural characteristics and dielectric properties of Ba Ti<sub>1-x </sub>Ce<sub>x </sub>O<sub>3</sub> ceramics

Optimizing oxygen vacancies and electrochemical performance of CeO2- δ nanosheets through the combination of di- and tri-valent doping

Influence of Nd-doping on the microstructure and electrical properties of Ca1-xNdxCeNbWO8+δ negative temperature coefficient ceramics

Enhanced Energy Storage Properties Promoted by the Synergistic Effects of Aging Effects and Relaxor Behavior in Ce-Mn Co-Doped Sr0.4Ba0.6Nb2O6 Ferroelectric Ceramics

Abnormal Curie Temperature Behavior and Enhanced Strain Property by Controlling Substitution Site of Ce Ions in Batio3 Ceramics

The effect of Li/Ce co‐doping on structural and electrical properties of Sr2−x(Li, Ce)x/2Nb2O7 piezoelectric ceramics

Enhancement of Charge-Discharge Properties and Temperature Stability of (Ba0.975Na0.05)Ti0.99Nb0.01O3 Ceramic by Doping High-Entropy Oxide

Effect of Ceo2 Addition on the Microstructure and Dielectric Properties of Batio3 Co-Doped with Nb and Fe

Effect of Excess Oxygen on Crystal Structures and Dielectric Responses of Nd2NiO4+ Ceramics

High‐entropy strategies boosting dielectric temperature stability in (Na0.4K0.1Bi0.5)TiO3 ceramics

Enhanced Temperature-Stable Dielectric Properties in Oxygen Annealed 0.85(K0.5na0.5)nbo3-0.15Srzro(3) Ceramic

Dopants and oxygen vacancy migration mechanism in temperature-stable (Ba, Ca)TiO3-based ceramics

Enhanced dielectric properties and improved thermal stability in TiO 2 -based ceramics by Cu and Nb co-doping

Design and synthesis of thermistor materials with high aging stability: Multicomponent equiatomic Mn-Co-Ni-Al-Zn-O ceramics

Decreasing polar-structure size: Achieving superior energy storage properties and temperature stability in Na0.5Bi0.5TiO3-based ceramics for low electric field and high-temperature applications