Abstract:In this study, a novel Ge-Sn based perovskite solar cell (PSC) with the structure FTO/WS2/ FA0.75MA0.25Sn0.95Ge0.05I3/MoO3/Ag has been designed and thoroughly analyzed employing SCAPS-1D. Drawing attention from the work of Ito et al., where a similar perovskite-based PSC displayed a poor performance of ~ 4.48 % PCE, in which a large conduction band offset (CBO) acts as a critical factor contributing to interfacial recombination and device deterioration. To address this issue, we presented WS2 as an electron transport layer (ETL) along with MoO3 as a hole transport layer (HTL), both possessing compatible CBO and valence band offset (VBO) with perovskite material. Through systematic simulations and optimizations, remarkable improvements in the PSC's performance have been acquired, getting a power conversion efficiency (PCE) of 18.97%. The optimized structure involved a 50 nm MoO3 HTL, 350 nm FA0.75MA0.25Sn0.95Ge0.05I3 light-harvesting layer (LHL), and a 50 nm WS2 ETL. Bulk defect densities for the LHL and ETL were optimized to 1×1015 cm-3 and 1×1018 cm-3, respectively, significantly superior values than that of reported value in the literature. Particularly, the tolerable defect density of ETL has increased 1000 times than published literature. The interfacial tolerable trap density for MoO3/perovskite increased from 1×1014 cm-2 to 1×1016 cm-2. The study also explored the impact of defects on quantum efficiency, revealing a severe negative influence beyond a perovskite bulk defect density of 1×1017 cm-3. Light intensity analysis demonstrated a correlation between incident light reduction and device performance decay. Capacitance–Voltage (C-V) and Mott-Schottky (M-S) have been analyzed during the study. Finally, the total recombination of the optimized device concerning thickness has been analyzed along with the dark J-V characteristics. The comprehensive insights gained from this work are anticipated to accelerate the fabrication of mixed Ge-Sn based PSCs with improved efficiency, paving the way for commercialization in the photovoltaic industry.

Unprecedented Inorganic HTL-based MA-free Sn-Pb Perovskite Photovoltaics with an Efficiency over 23%

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Antioxidation and Energy-Level Alignment for Improving Efficiency and Stability of Hole Transport Layer-Free and Methylammonium-Free Tin–Lead Perovskite Solar Cells

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

Organic‐Free and Lead‐Free Perovskite Solar Cells with Efficiency over 11%

Performance Impact of Lead‐Free CsSn0.5Ge0.5I3 Based Perovskite Solar Cells with HTL‐Free Incorporation

B‐Site Co‐Doping Coupled with Additive Passivation Pushes the Efficiency of Pb–Sn Mixed Inorganic Perovskite Solar Cells to Over 17%

Synergetic Regulation of Interface Defects and Carriers Dynamics for High‐Performance Lead‐Free Perovskite Solar Cells

Stable and High‐Efficiency Methylammonium‐Free Perovskite Solar Cells

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Lead-Free Flexible Perovskite Solar Cells with Interfacial Native Oxide Have >10% Efficiency and Simultaneously Enhanced Stability and Reliability

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation

Resolving Mixed Intermediate Phases in Methylammonium-Free Sn–Pb Alloyed Perovskites for High-Performance Solar Cells

Inorganic Pb-Sn Perovskite Solar Cells with CF3-PA Internal Defect Passivation Strategy

Revealing the High-Performance of a Novel Ge-Sn-Based Perovskite Solar Cell by Employing SCAPS-1D

Targeted passivation and optimized interfacial carrier dynamics improving the efficiency and stability of hole transport layer-free narrow-bandgap perovskite solar cells

Realizing High Efficiency over 20% of Low‐Bandgap Pb–Sn‐Alloyed Perovskite Solar Cells by in Situ Reduction of Sn4+

Efficient and Stable Methylammonium-Free Tin-Lead Perovskite Solar Cells with Hexaazatrinaphthylene-Based Hole-Transporting Materials

DMSO‐Free Solvent Strategy for Stable and Efficient Methylammonium‐Free Sn–Pb Alloyed Perovskite Solar Cells