Abstract:Background: Ethanol production through fermentation of gas mixtures containing CO, CO2 and H2 has just started operating at commercial scale. However, quantitative schemes for understanding and predicting productivities, yields, mass transfer rates, gas flow profiles and detailed energy requirements have been lacking in literature; such are invaluable tools for process improvements and better systems design. The present study describes the construction of a hybrid model for simulating ethanol production inside a 700 m3 bubble column bioreactor fed with gas of two possible compositions, i.e., pure CO and a 3:1 mixture of H2 and CO2. Results: Estimations made using the thermodynamics-based black-box model of microbial reactions on substrate threshold concentrations, biomass yields, as well as CO and H2 maximum specific uptake rates agreed reasonably well with data and observations reported in literature. According to the bioreactor simulation, there is a strong dependency of process performance on mass transfer rates. When mass transfer coefficients were estimated using a model developed from oxygen transfer to water, ethanol productivity reached 5.1 g L-1 h-1; when the H2/CO2 mixture is fed to the bioreactor, productivity of CO fermentation was 19% lower. Gas utilization reached 23 and 17% for H2/CO2 and CO fermentations, respectively. If mass transfer coefficients were 100% higher than those estimated, ethanol productivity and gas utilization may reach 9.4 g L-1 h-1 and 38% when feeding the H2/CO2 mixture at the same process conditions. The largest energetic requirements for a complete manufacturing plant were identified for gas compression and ethanol distillation, being higher for CO fermentation due to the production of CO2. Conclusions: The thermodynamics-based black-box model of microbial reactions may be used to quantitatively assess and consolidate the diversity of reported data on CO, CO2 and H2 threshold concentrations, biomass yields, maximum substrate uptake rates, and half-saturation constants for CO and H2 for syngas fermentations by acetogenic bacteria. The maximization of ethanol productivity in the bioreactor may come with a cost: low gas utilization. Exploiting the model flexibility, multi-objective optimizations of bioreactor performance might reveal how process conditions and configurations could be adjusted to guide further process development.

Mathematical modeling of an isothermal tubular bioreactor coupled with batch culture for ethanol production: a one-dimensional approach

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

Mechanistic Modelling of Biomass Growth, Glucose Consumption and Ethanol Production by Kluyveromyces marxianus in Batch Fermentation

Modeling ethanol production through gas fermentation: a biothermodynamics and mass transfer-based hybrid model for microbial growth in a large-scale bubble column bioreactor

Heterogeneous modeling for the alcoholic fermentation process

Modeling of batch phenol biodegradation in internal loop airlift bioreactor with gas recirculation by Candida tropicalis

Mathematical Modeling of a Biotechnological Continuous Fermentation Process for Lactic Acid Production: A Review

Mathematical Modeling and Simulation of 1,3‐Propanediol Production by Klebsiella pneumoniae BLh‐1 in a Batch Bioreactor Using Bayesian Statistics

Modeling of glycerol production by fermentation in different reactor states

Mathematical Modeling Of The Batch Fermentation Of Zoogloea Sp Gy3 Used For Synthesizing Polyhydroxyalkanoates

Modeling of solid-state fermentation for ethanol production from sweet sorghum stalks

Data-based dynamic compartment model: Modeling of E. coli fed-batch fermentation in a 600 m3 bubble column

Modeling of rotating drum bioreactor for anaerobic solid-state fermentation

Estimation of temperature dependent parameters of a batch alcoholic fermentation process

Computational Fluid Dynamics Modeling of Fermentation Reactions in Bioethanol Fermentor: A Review

Experimental Insights into the Fermentation of Pyro-Syngas to Ethanol in a Semi-Batch and Continuous Stirred Bioreactor with Mathematical Modelling and Optimization

Kinetic Modelling of Ralstonia eutropha H16 Growth on Different Substrates

Dynamic flux balance modeling of S. cerevisiae and E. coli co-cultures for efficient consumption of glucose/xylose mixtures

Modelling and Economic Optimal Control for a Laboratory-scale Continuous Stirred Tank Reactor for Single-cell Protein Production

Numerical Simulation of Biomass Growth in OKTOP®9000 Reactor at Industrial Scale

Modeling and estimation of production rate for the production phase of non-growth-associated high cell density processes