Abstract:Abstract Ventricular assist devices (VAD) are designed to provide circulatory support to patients suffering from advanced-stage heart failure. While not pulsatile, the advantages of continuous axial flow VADs include a compact size and low mechanical failure rate. However, being compact, they operate at high speed, resulting in adverse effects, such as hemolysis caused by high flow shear and thrombosis formation in stagnant regions are common and threaten the successful use of the device. While state-of-the-art computational fluid dynamics (CFD) is widely used in designing these devices, detailed high-resolution experimental measurements of the flow within them are not readily available in the literature. Such experimental data is crucial for understanding the flow inside the VAD and its interaction with blood cells as well as for validating the CFD predictions. The present study investigates the flow inside a 1:1 exact replica of a VAD – ReliantHeart HeartAssist5®. This 12mm diameter device consists of an inlet guide vane (IGV), a rotor and a stator. However, unlike in the real machine, the rotor is driven by a thin shaft that penetrates through the center of the IGV. Refractive index-matching is used to facilitate optical measurements. Hence, all the blades and housing of the pump are made of transparent acrylic. The working fluid is a mixture of water, sodium iodide and glycerin, which matches the refractive index of acrylic, and the kinematic viscosity of blood. Performance tests have been carried out at speeds ranging from 7000 to 9000 RPM. Trends of the results are consistent with those of the actual machine. While scaled data for the pressure rise across the rotor at different speeds collapse, the total head rise across the entire machine does not. High-resolution 2D PIV measurements with vector spacing of 30μm have been conducted in meridional planes of the rotor passage at several blade orientations. They have been performed at 8000RPM and flowrate of 4.5L/min, consistent with physiological requirements. They show that near the rotor front end, the flow in the tip region is dominated by the tip leakage vortex (TLV), associated blockage effects, and very high turbulence level. The upstream end of this domain remains aligned with the leading edge, implying that blades persistently dissect the remnants of a previous TLVs. Interaction of the hub boundary layer with the blades also generates secondary flows. Downstream of the helical section of the rotor, the axial flow is high near the hub and low in the outer part of the passage due to leakage flow-related blockage. Hub boundary layer separation occurs upstream of the stator, generating a large circumferential vortex that occupies nearly half of the rotor span. The complexity of the flow structure and turbulence in this machine would be a challenge to model.

Hemodynamic evaluation of a novel double lumen cannula for left ventricle assist device system

Computational Fluid Dynamics Analysis and PIV Validation of a Bionic Vortex Flow Pulsatile LVAD.

Ventricular flow dynamics with varying LVAD inflow cannula lengths: In-silico evaluation in a multiscale model.

Improving Hemodynamics of Cardiovascular System under a Novel Intraventricular Assist Device Support Via Modeling and Simulations

Left Ventricular Assist Devices: Impact of Flow Ratios on the Localisation of Cardiovascular Diseases Using Computational Fluid Dynamics

Full-scale numerical simulation of hemodynamics based on left ventricular assist device

Quantitative Evaluation of Blood Damage in a Centrifugal VAD by Computational Fluid Dynamics

Computational characterization of flow and blood damage potential of the new maglev CH-VAD pump versus the HVAD and HeartMate II pumps

Computational Fluid Dynamics As a Tool in the Development Process of Left Ventricular Assist Devices

Computational Fluid Dynamics-Based Hydraulic and Hemolytic Analyses of a Novel Left Ventricular Assist Blood Pump.

Computational fluid dynamic simulations of a cavopulmonary assist device for failing Fontan circulation

Left Ventricular Hemodynamics with an Implanted Assist Device: An In Vitro Fluid Dynamics Study

Cavitation in Left Ventricular Assist Device Patients: a Potential Early Sign of Pump Thrombosis

Enhancing the implantation of mechanical circulatory support devices using computational simulations

Hydraulic and hemodynamic performance of a minimally invasive intra-arterial right ventricular assist device

Experimental Investigation of the Flow Inside the Rotor Passage of an Axial Ventricular Assist Device

Development of a Novel Axial Flow Ventricular Assist Device and its Preliminary Animal Experiment

A New Way to Evaluate Thrombotic Risk in Failure Heart and Ventricular Assist Devices

Improving hydraulic performance of the left atrial assist device using computational fluid dynamics

Hemocompatibility and hemodynamic comparison of two centrifugal LVADs: HVAD and HeartMate3

Effect of RVAD Cannulation Length on Right Ventricular Thrombosis Risk: An In Silico Investigation