Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

A GA-based model updating procedure for the numerical simulation of FRCM-to-masonry bond

Bio-based Connections and Hybrid Planar Truss: A Parallel Genetic Algorithm Approach for Model Updating

A Bayesian Model Updating Approach Applied to Mechanical Properties of Recycled Aggregate Concrete under Uniaxial or Triaxial Compression

Modeling of Glubam Roof Truss, Parameter Identification and Updating Based on Parallel Genetic Algorithm

Genetic Algorithm-Based Optimization Procedure for the Seismic Retrofitting of Existing Masonry Structures

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Dynamic characterization and FE model updating via metaheuristic algorithm of two confined masonry buildings

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

FRCM Confinement of Masonry: Strain Model Assessment and New Proposals

Calibration of constitutive models using genetic algorithms

Confinement Of Masonry With Frcm Composites: Strength Predictive Models

Nonlinear Model Updating Algorithm for Biaxial Reinforced Concrete Constitutive Models of Shear Walls

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Analytical Approach and Numerical Simulation of Reinforced Concrete Beams Strengthened with Different FRCM Systems

Finite element model updating for structural applications

Structural performance assessment of RC flexural members through crack-based fibre beam-column model updating

A new confinement model for FRCM confined concrete

Robust improvement of the finite-element-model updating of historical constructions via a new combinative computational algorithm

Statistical analysis of the bonding properties of the fabric-reinforced cementitious matrix for strengthening masonry structures

Masonry elements strengthened through Textile-Reinforced Mortar: application of detailed level modelling with a free open-source Finite-Element code

Mechanics-based formulation for modeling of ultra high-performance fiber reinforced concrete material using bonded discrete elements