Abstract:Masonry was the most used material during the last centuries to build constructions. Most of the existing masonry structures (buildings, bridges, etc.) were built without considering some important structural considerations that are important nowadays. Moreover, due to factors such as the increasing of service loads, materials aging, structural damage, etc., the existing masonry structures require strengthening interventions. The definition of optimal strengthening strategies using traditional and innovative materials is still an important issue of the scientific research. In fact, during the last decade, many researchers focused their attention studying innovative composites materials, such as fiber-reinforced polymers and fiber-reinforced cementitious matrix composites, for the strengthening of existing masonry structures. This research has focused on aspects such as the bond behavior between the substrate and the composite materials, the structural behavior of the strengthened masonry and concrete structures, and the compatibility and reversibility of these materials when bonded to existing substrates. In this study, the bond behavior of a composite material known as steel fiber-reinforced mortar (SFRM), recently used as for the strengthening of existing structures, applied onto masonry structures is analyzed experimentally and numerically. First, the material is characterized experimentally with the aim of getting insight on its behavior and applicability when applied as an innovative technique for the strengthening of masonry and to obtain mechanical parameters required for the numerical models. Mechanical properties of the SFRM studied included flexural and compressive strength, tensile strength, and residual flexural strength. The SFRM bond behavior on masonry substrates was evaluated by means of double shear lap tests. In addition, the experimental tensile and bond behavior of the SFRM is studied numerically through finite-element models validated using the results obtained during the experimental tests. Results show that if an adequate bonded length is provided, the SFRM can fully develop its tensile strength as detachment from the substrate is not observed.

Confinement Of Masonry With Frcm Composites: Strength Predictive Models

FRCM Confinement of Masonry: Strain Model Assessment and New Proposals

Mechanical Properties of SFRC: Database Construction and Model Prediction

Path-Dependent Stress–Strain Model for FRP-Confined Recycled Brick Aggregate Concrete

Analysis-oriented Stress–strain Models for FRP–confined Concrete

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

A new confinement model for FRCM confined concrete

A comparison between the use of FRP, FRCM and HPM for concrete confinement

Compressive Behavior of Concrete Jacketed in Basalt TRM Shell: Experiments and Predictions

Statistical analysis of the bonding properties of the fabric-reinforced cementitious matrix for strengthening masonry structures

Analytical Approach and Numerical Simulation of Reinforced Concrete Beams Strengthened with Different FRCM Systems

Experimental behavior of reinforced concrete columns confined with carbon-FRCM composites

Effectiveness of BFRP confinement on the compressive behaviour of clay brick masonry cylinders

Simplified Procedure to Determine the Cohesive Material Law of Fiber-Reinforced Cementitious Matrix (FRCM)–Substrate Joints

Prediction of Flexural Strength of RC Circular Columns Considering Lateral Confinement Effects of FRCM and Transverse Steel Reinforcement

Compressive Behavior of Masonry Columns Confined with Basalt Textile-Reinforced Concrete

Mechanical properties and debonding strength of Fabric Reinforced Cementitious Matrix (FRCM) systems for masonry strengthening

Prediction of confined compressive strength of concrete column strengthened with FRCM composites

Mechanical Behavior of Masonry Columns Strengthened with Basalt Textile Reinforced Concrete under Eccentric Loading: Experimental Investigation and Analytical Modelling

Bond behavior of steel fiber-reinforced mortar (SFRM) applied onto masonry substrate

Confinement mechanism and modeling of basalt TRM confined concrete: Effect of mortar matrix grade