Abstract:In the current technological landscape, lithium metal batteries have significantly surpassed the energy density of conventional lithium-ion batteries. Therefore, The advent of anode-free lithium metal batteries (AFLMBs) offers higher energy densities.. They also provide advantages such as reduced process complexity and lower costs due to their design that eliminates the need for anode materials. Unlike the lithium-ion insertion and extraction reactions in traditional lithium-ion batteries. This makes them easier to lithium dendrite formation, which can puncture the separator or solid electrolytes, among other issues. In this work, we developed anin-operando electron microscopic technique with a unique vacuum square-cell design to ensure air-tight transfer of in-operandocells with vacuum protection into the SEM chamber. We significantly improved the imaging resolution with a windowless design, enabling the direct electron beam to focus on the electrode interfaces. Thus, real-time imaging of Li growth could be achieved via a stable current supply and controlled temperature. we systematically analyzed the Li growth and dendrite propagation behavior in AFLMBs using solid polymer electrolyte (SPE). In particular, we used polyethylene oxide (PEO)-based SPEs containing different lithium salts, namely 25wt% Lithium bis(trifluoromethanesulfonyl)imide ( LiTFSI ), Lithium difluoro (oxalateo)borate ( LiDFOB ), and Lithium bis(oxalate)borate ( LiBOB ), within a LiFePO 4 ||Cu anode-free cell configuration. Under a fixed current density, Li deposition and stripping were conducted, in which the PEO-LiTFSI SPE exhibited uniform deposition with a mossy lithium dendrite morphology. In the subsequent deposition process, some branching lithium dendrites were observed. Meanwhile, PEO-LiBOB showed uneven Li deposition with needle-like dendritic formation, potentially disrupting the SPE/electrode interface and leading to safety hazards. Lastly, PEO-LiDFOB initially showed mossy lithium deposition. In contrast, a few dendritic lithium structures appeared as the deposition process continued into the intermediate and later stages. The study successfully established a novel in-situ electron microscopy observation platform isolating water and oxygen. This platform recreated the actual battery operating environment, enhancing the credibility of experimental results. Additionally, we successfully elucidated the growth mechanisms of lithium dendrites in SPE with different lithium salts in the LFP||Cu configuration. This in-situ microscope technology aims to observe the relevant mechanisms behind dynamic deposition. Understanding how this deposition affects battery performance and safety and combining it with advanced operational and ex-situ characterization techniques can further promote the development of all-solid -state batteries in the future.

The Mechanism of Aluminum Deposition and Dendrite Growth on a Copper Substrate in Anode-Free Aluminum Batteries

A Seamless Metal-Organic Framework Interphase with Boosted Zn2+Flux and Deposition Kinetics for Long-Living Rechargeable Zn Batteries

Research Progress of Anode-Free Lithium Metal Batteries

Surface Evolution of Aluminum Electrodes in Non-Aqueous Aluminum Batteries

Mechanism of lithium dendrites growth on iron surfaces toward high-performance and safe anode-free lithium metal batteries

Reversible, Dendrite-Free, High-Capacity Aluminum Metal Anode Enabled by Aluminophilic Interface Layer

Regulating electrodeposition morphology in high-capacity aluminium and zinc battery anodes using interfacial metal–substrate bonding

Lithium Dendrite Propagation in Anode-Free Lithium Metal Batteries: An in-Operando Scanning Electron Microscopic Study

Phosphorized 3D Current Collector for High-Energy Anode-Free Lithium Metal Batteries

Preferred crystal plane electrodeposition of aluminum anode with high lattice-matching for long-life aluminum batteries

The thermodynamically directed dendrite-free lithium metal batteries on LiZn alloy surface

The mechanism of Li deposition on the Cu substrates in the anode-free Li metal batteries

Suppressing Al dendrite growth towards a long-life Al-metal battery

Effect of the Formation Rate on the Stability of Anode-Free Lithium Metal Batteries

Dendrite-free and Air-Stable Lithium Metal Batteries Enabled by Electroless Plating with Aluminum Fluoride

Columnar Lithium Metal Deposits: the Role of Non-Aqueous Electrolyte Additive

Anode‐Free Li Metal Batteries: Feasibility Analysis and Practical Strategy

A Tailored Interface Design for Anode‐free Solid‐State Batteries

Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries

Cyclability Investigation of Anode-Free Lithium-Metal Batteries

Anode-Free Aluminum Electrode with Ultralong Cycle Life and High Coulombic Efficiency Exceeding 99.92% Enabled by a Lattice-Matching Layer