Abstract:High interfacial resistance and uncontrollable lithium (Li) dendrite are major challenges in solid-state Li-metal batteries (SSLMBs), as they lead to premature short-circuiting and failure of SSLMBs. Here, we report the synthesis of a composite anode comprising a three-dimensional LiCux nanowire network host infiltrated with Li (Li* anode) with low interfacial impedance and superior electrochemical performance. The Li* anode is fabricated by dissolving Cu foil into molten Li followed by solidification. The Li* anode exhibits good wettability with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) and high mechanical strength, rendering low Li*/LLZTO interfacial impedance, homogeneous deposition of Li, and suppression of Li dendrites. Consequently, the Li* anode-based symmetric cells and full cells with LiNi0.88Co0.1Al0.02O2 (NCA), LiFePO4 (LFP), and FeF2 cathodes deliver remarkable electrochemical performance. Specifically, the Li*/LLZTO/Li* symmetrical cell achieves a remarkably long cycle lifetime of 10 000 h with 0.1 mA·cm–2; the Li*/LLZTO/NCA full cell maintains capacity retention of 73.4% after 500 cycles at 0.5C; and all-solid-state Li*/LLZTO/FeF2 full cell achieves a reversible capacity of 147 mAh·g–1 after 500 cycles at 100 mA·g–1. This work demonstrates potential design tactics for an ultrastable Li*/garnet interface to enable high-performance SSLMBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11613.Physicochemical properties of LLZTO (SEM, XRD, EIS) and Li* anode, electrochemical performances of the Li*/LLZTO/Li* cells, Li*/LLZTO/NCA cells, Li*/LLZTO/FeF2 full cells, and state-of-the-art electrochemical performances of solid-state batteries based on garnet SSEs (PDF)Reaction of molten Li with Cu foil (MP4)Rubbing the polished LLZTO pellet in the molten Li–Cu alloy (MP4)This article has not yet been cited by other publications.

A Tailored Interface Design for Anode‐free Solid‐State Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Enhanced Salt Content and Stabilized Bilayer Passivation Interphase Toward Long-Life and High-Safety Anode-Free Lithium Battery

Interplay of Interfacial Adhesion and Mechanical Degradation in Anode-Free Solid-State Batteries

A 3D Cross‐Linking Lithiophilic and Electronically Insulating Interfacial Engineering for Garnet‐Type Solid‐State Lithium Batteries

Tuning the Anode–Electrolyte Interface Chemistry for Garnet‐Based Solid‐State Li Metal Batteries

Smart Construction of an Intimate Lithium | Garnet Interface for All‐Solid‐State Batteries by Tuning the Tension of Molten Lithium

Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries

Drawing a Soft Interface: An Effective Interfacial Modification Strategy for Garnet-Type Solid-State Li Batteries

Transforming Interface Chemistry throughout Garnet Electrolyte for Dendrite-Free Solid-State Batteries

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Ferroelectric interface for efficient sodium metal cycling in anode-free solid-state batteries

A strategy involving the use of 3D self-supporting B.N co-doped carbon nanofiber composite solid polymer electrolytes to stabilize the interface of Polymer electrolyte and lithium-metal

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCu x Nanowire Network Host

Designing Bidirectionally Functional Polymer Electrolytes for Stable Solid Lithium Metal Batteries

Gradient nano-recipes to guide lithium deposition in a tunable reservoir for anode-free batteries

Rational Design of an Electron/Ion Dual-Conductive Cathode Framework for High-Performance All-Solid-State Lithium Batteries.

Asymmetrical Interface Modification Between Electrodes and Garnet-Type Electrolyte Enabling All-Solid-state Lithium Batteries

Selection and Surface Modifications of Current Collectors for Anode-Free Polymer-Based Solid-State Batteries

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

Integrating Prelithiation and Interface Protection to Achieve High‐Energy All‐Solid‐State Batteries