Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Analytically derived disturbance rejection‐based PID controller tuning for second‐order plus dead time plants

A Recursive Tuning Approach for the Model-Free PID Controller Design

Performance assessment of PID controller with time-variant disturbance dynamics

Robust PID Tuning Using Closed-Loop Identification

Closed-loop Identification Based PID Tuning Without External Excitation

Low‐gain Internal Model Control PID Controller Design Based on Second‐order Filter

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

Robust PI Control Design Using Particle Swarm Optimization

PID tuning for improved performance

Direct synthesis approach of PID controller for second-order delayed unstable processes

A New Optimum Tuning Method of PI Controllers in First-Order Time-Delay Systems

PID control system analysis and design

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Intelligent PID Controller Design with Adaptive Criterion Adjustment Via Least Squares Support Vector Machine

Novel tuning rules for PIDC controllers in automatic voltage regulation systems under constraints on robustness and sensitivity to measurement noise

Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection

A New Pso-Pid Tuning Method for Time-Delay Processes

Modified PID controller based on H/sub ∞/ theory

Enhanced Imc Design of Load Disturbance Rejection for Integrating and Unstable Processes with Slow Dynamics

Robust Proportional–Integral–Derivative (PID) Design for Parameter Uncertain Second-Order Plus Time Delay (SOPTD) Processes Based on Reference Model Approximation