Abstract:The paper extends the earlier work entitled "Making the PI and PID Controller Tuning Inspired by Ziegler and Nichols Precise and Reliable", to higher-order controllers and a broader range of experiments. The original series PI and PID controllers, based on automatic reset calculated by filtered controller outputs, are now augmented by higher-order output derivatives. This increases the number of degrees of freedom that can be used to modify the resulting dynamics, accelerates transient responses, and increases robustness to unmodeled dynamics and uncertainties. The fourth order noise attenuation filter used in the original work allows for the addition of an acceleration feedback signal, thus resulting in a series PIDA controller or even a jerk feedback that leads to a PIDAJ series controller. Such a design can further use the original process and filter approximation of the step responses through the integral-plus-dead-time (IPDT) model, while allowing experimentation with disturbance and setpoint step responses of the series PI, PID, PIDA and PIDAJ controllers, and thus, evaluating the role of output derivatives and noise attenuation from a broader perspective. All controllers considered are tuned using the Multiple Real Dominant Pole (MRDP) method, which is complemented by a factorization of the controller transfer functions to achieve the smallest possible time constant for automatic reset. The smallest time constant is chosen to improve the constrained transient response of the considered controller types. The obtained excellent performance and robustness allow the proposed controllers to be applied to a wider range of systems with dominant first-order dynamics. The proposed design is illustrated on a real-time speed control of a stable direct-current (DC) motor, which is approximated (together with a noise attenuation filter) by an IPDT model. The transient responses obtained are nearly time-optimal, with control signal limitations active for most setpoint step responses. Four controllers with different degrees of derivative with generalized automatic reset were used for comparison. It was found that controllers with higher-order derivatives may significantly improve the disturbance performance and virtually eliminate overshoots in the setpoint step responses in constrained velocity control.

A New Optimum Tuning Method of PI Controllers in First-Order Time-Delay Systems

A Recursive Tuning Approach for the Model-Free PID Controller Design

A New Pso-Pid Tuning Method for Time-Delay Processes

Performance assessment of PID controller with time-variant disturbance dynamics

IPDT Model-Based Ziegler-Nichols Tuning Generalized to Controllers with Higher-Order Derivatives

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Response to a Setpoint Change in PID Controlled Time-Delay Feedback Systems

Optimal Disturbance Rejection for Pi Controller with Constraints on Relative Delay Margin

New Tuning Rules of PI+CI Controllers for First-Order Systems

A PID Controller with Desired Closed-Loop Time Response and Stability Margin

Tuning Generalized Predictive PI controllers for process control applications

Robust PI Control Design Using Particle Swarm Optimization

ITAE-optimal PI Controller Based on Genetic Algorithm for Low-Order Process with Large Time Delays.

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

A comparative study on PI-PD controller design using stability region centroid methods for unstable, integrating and resonant systems with time delay

Autotuning of a new PI-PD Smith predictor based on time domain specifications

Real-time Gain Tuning of PI Controllers for High-Performance PMSM Drives

Analytically derived disturbance rejection‐based PID controller tuning for second‐order plus dead time plants

Adaptive GSA-based optimal tuning of PI controlled servo systems with reduced process parametric sensitivity, robust stability and controller robustness

Optimal Tuning of PID Controllers for Under-Damped Systems