Compact nanoscale textures reduce contact time of bouncing droplets

Lin Wang,Ruoxi Wang,Jing Wang,Tak-Sing Wong

DOI: https://doi.org/10.1126/sciadv.abb2307

IF: 13.6

2020-07-17

Science Advances

Abstract:Compact nanoscale textures reduce contact time of bouncing droplets with implications in insect survival and miniature drones.

multidisciplinary sciences

What problem does this paper attempt to address?

Theoretical and Experimental Studies on the Controllable Pancake Bouncing Behavior of Droplets.

Huaping Wu,Kunpeng Jiang,Zhenxiong Xu,Sihang Yu,Xiang Peng,Zheng Zhang,Hao Bai,Aiping Liu,Guozhong Chai

DOI: https://doi.org/10.1021/acs.langmuir.9b03153

IF: 3.9

2019-01-01

Langmuir

Abstract:A droplet that impacts on a superhydrophobic surface will undergo a process of unfolding, contracting, and finally rebounding from the surface. With regards to the pancake bouncing behavior of a droplet, since the retraction process of the droplet is omitted, the contact time is greatly shortened compared to the normal type of bouncing. However, the quantitative prediction to the range of droplet pancake bouncing and the adjustment of pancake bouncing state have yet to be probed into. In this paper, we reported the controllable pancake bouncing of droplets by adjusting the size of the superhydrophobic surface with microstructures. In addition, we also discovered a dimensional effect with regards to pancake bouncing, namely, the pancake bouncing would be more likely to happen on the surfaces with large post spacing for the droplet with the larger radius. The contact time could be reduced to 2 ms by adjusting the size of the microstructures and the radius of the droplets. Based on the relationship between the droplet bouncing state and the surface microstructure size, we are able to propose reasonable dimensions for the surfaces in order to control pancake bouncing.
Droplet Jumping: Effects of Droplet Size, Surface Structure, Pinning, and Liquid Properties.

Xiao Yan,Leicheng Zhang,Soumyadip Sett,Lezhou Feng,Chongyan Zhao,Zhiyong Huang,Hamed Vahabi,Arun K Kota,Feng Chen,Nenad Miljkovic

DOI: https://doi.org/10.1021/acsnano.8b06677

IF: 17.1

2019-01-01

ACS Nano

Abstract:Coalescence-induced droplet jumping has the potential to enhance the efficiency of a plethora of applications. Although binary droplet jumping is quantitatively understood from energy and hydrodynamic perspectives, multiple aspects which affect jumping behavior including droplet size mismatch, droplet-surface interaction, and condensate thermophysical properties, remain poorly understood. Here, we develop a visualization technique utilizing microdroplet dispensing to study droplet jumping dynamics on nanostructured superhydrophobic, hierarchical superhydrophobic, and hierarchical biphilic surfaces. We show that on the nanostructured superhydrophobic surface, the jumping velocity follows inertial-capillary scaling with a dimensionless velocity of 0.26 and a jumping direction perpendicular to the substrate. A droplet mismatch phase diagram was developed showing that jumping is possible for droplet size mismatch up to 70%. On the hierarchical superhydrophobic surface, jumping behavior was dependent on the ratio between the droplet radius R relative and surface structure length scale L. For small droplets (R≤5L), the jumping velocity was highly scattered, with a deviation of the jumping direction from the substrate normal as high as 80º. Surface structure length scale effects were shown to vanish for large droplets (R>5L). On the hierarchical biphilic surface, similar but more significant scattering of the jumping velocity and direction were observed. Droplet-size-dependent surface adhesion and pinning-mediated droplet rotation were responsible for the reduced jumping velocity and scattered jumping direction. Furthermore, droplet jumping studies of liquids with surface tensions as low as 38 mN/m were performed, further confirming the validity of inertial-capillary scaling for varying condensate fluids. Our work not only demonstrates a powerful platform to study droplet-droplet and droplet-surface interactions, it provides insights into the role of fluid-substrate coupling as well as condensate properties during droplet jumping.
Nanodroplet impacts on hydrophobic/superhydrophobic surfaces with point textures

Ning-Ning Han,Shu-Wen Wang,Bao-Min Sun,Xin He

DOI: https://doi.org/10.1063/5.0109464

IF: 2.877

2022-11-28

Journal of Applied Physics

Abstract:Reducing the contact time between droplets and solid surfaces is important in anti-icing surface design. The present work investigates the impact dynamics of nanodroplets on hydrophobic/superhydrophobic surfaces decorated by point textures via molecular dynamics (MD) simulations, aiming to significantly reduce the contact by the point textures. Based on distinguishing outcome regimes into a phase diagram, the point texture is found to not affect the outcome regimes of sticky, bouncing, and splash, whereas the internal rupture regime is significantly enhanced so that the new outcome in this regime, ring-bouncing, which is reported for the first time at the nanoscale, is also significantly reinforced. Impacting nanodroplets with ring-bouncing behaviors have remarkably reduced the contact time due to the saved retraction time via creating a retraction of both inner and outer contact lines. Subsequently, an energy conservation equation from the initial to the bouncing states is established for identifying the boundary of this outcome regime, which shows good agreement with the outcome phase diagram. Finally, impacting nanodroplets with three diameters of 8, 10, and 14 nm are implemented for understanding how the ratio of the droplet size to the texture point affects the reduction of the contact time. The MD results show the cases of 8-nm nanodroplets displaying the best performance of reducing the contact time by 52%, which is superior to current studies in reducing the contact time at the nanoscale. This can be explained by the lower ratio of droplet diameter to texture size leading to a further shorter distance of retraction after the internal rupture and hence a shorter contact time.

physics, applied
Numerical study on the bouncing dynamics of droplets impacting on a macro-textured superhydrophobic surface

Jiayi Zhao,Shuo Chen,Kaixuan Zhang,Damin Cao,Yang Liu

DOI: https://doi.org/10.1016/j.compfluid.2022.105383

2022-04-01

Abstract:The contact time of droplet impacting on surfaces involves in the extent of transformation between the droplet's surface energy and kinetic energy. Based on the axisymmetric assumption, the theoretical prediction of the contact time is regardless of impacting velocity of the droplet. In order to further reduce the contact time, a novel superhydrophobic surface with a macro-textured ridge was proposed by Bird et al [1]. to generate asymmetric bouncing behaviors of a droplet. In the present study, a detailed numerical simulation was carried out to investigate the bouncing dynamics of the impacting process of droplets on surface with a macro-textured ridge at various Weber (We) numbers by adopting many-body dissipative particle dynamics (MDPD). The bouncing dynamics of droplets can be mainly divided into two types, i.e. jug-like behavior with asymmetric retracting velocity and wing-like behavior with rotation of the sub-droplets. The angular velocity of droplets during rebounding is crucial for the corresponding contact time, where the step-like angular velocity at different We numbers are observed. Finally, a brief theoretical analysis was provided to reveal the critical We number and the limitation of contact time for the wing-like state. This work is helpful in understanding the reduction of contact time for droplet impacting on a macro-textured superhydrophobic surface, meanwhile, it offers a guidance for surface structural design where enough angular velocity of droplets should be produced during rebounding if the contact time needs to be decreased.

mechanics,computer science, interdisciplinary applications
Self‐Adaptive Droplet Bouncing on a Dual Gradient Surface

Chenyang Wu,Xuezhi Qin,Huanxi Zheng,Zhenyu Xu,Yuxin Song,Yuankai Jin,Huanhuan Zhang,Jiaying Mo,Wanbo Li,Jian Lu,Zuankai Wang

DOI: https://doi.org/10.1002/smll.202304635

IF: 13.3

2023-10-03

Small

Abstract:Despite notable progress in reducing solid‐liquid contact time through surface engineering, existing methods suffer from one or more limitations. Here, this work reports the adaptive droplet bouncing on the curved islands made of tapered cones to eliminate these intractable conundrums, which unprecedentedly reduce contact time by ≈70% at higher Weber numbers We and ≈20% at low We simultaneously. Rapid detachment of impacting droplets from underlying substrate is highly preferred for mass, momentum, and energy exchange in many practical applications. Driven by this, the past several years have witnessed a surge in engineering macrotexture to reduce solid‐liquid contact time. Despite these advances, these strategies in reducing contact time necessitate the elegant control of either the spatial location for droplet contact or the range of impacting velocity. Here, this work circumvents these limitations by designing a dual gradient surface consisting of a vertical spacing gradient made of tapered pillar arrays and a lateral curvature gradient characterized as macroscopic convex. This design enables the impacting droplets to self‐adapt to asymmetric or pancake bouncing mode accordingly, which renders significant contact time reduction (up to ≈70%) for a broad range of impacting velocities (≈0.4–1.4 m s−1) irrespective of the spatial impacting location. This new design provides a new insight for designing liquid‐repellent surfaces, and offers opportunities for applications including dropwise condensation, energy conversion, and anti‐icing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Dynamic Control of Droplet Jumping by Tailoring Nanoparticle Concentrations

Chonglei Hao,Yang Zhou,Xiaofeng Zhou,Lufeng Che,Baojin Chu,Zuankai Wang

DOI: https://doi.org/10.1063/1.4958691

IF: 4

2016-01-01

Applied Physics Letters

Abstract:The dynamic impact behavior of droplets from solid surfaces has attracted increasing interest, especially propelled by the advances in the bio-inspired interfacial materials. In this work, we investigate the impact and bouncing dynamics of ethylene glycol droplets containing silica nanoparticles on superhydrophobic surfaces (SHS). We find that the rebounding of droplets from SHS is highly dependent on the impact velocity and suspension concentrations. By increasing the impact velocity or suspension concentrations, the probability of droplet bouncing from SHS is greatly reduced. The presence of nanoparticles can significantly increase the viscous energy dissipation inside the liquid droplets, therefore suppressing the jumping from surfaces. Based on the energy dissipation characterization, we also find the critical concentration to determine the manifestation of the viscous effect, above which the liquid suspensions exhibit non-Newtonian fluid properties. Our study provides an efficient approach to dynamically control the liquid jumping behaviors on SHS by tailoring the suspension concentrations. The insights learned from this study can be very useful in many industrial applications.
Reducing the contact time of a bouncing drop

James C. Bird,Rajeev Dhiman,Hyuk-Min Kwon,Kripa K. Varanasi

DOI: https://doi.org/10.1038/nature12740

IF: 64.8

2013-11-20

Nature

Abstract:There are many uses for surfaces that can stay dry, self-clean or resist icing, and many applications benefit from minimizing the contact time between a surface and any drops that may come into contact with it; drops are now shown to bounce off faster when using a superhydrophobic surface with a morphology that redistributes the liquid mass so that the centre of the drop assists in the recoil.

multidisciplinary sciences
Uniform and Persistent Jumping Detachment of Condensed Nanodroplets.

Chen Ma,Lin Wang,Zhi Xu,Wei Tong,Quanshui Zheng

DOI: https://doi.org/10.1021/acs.nanolett.3c04930

IF: 10.8

2024-01-01

Nano Letters

Abstract:Realizing jumping detachment of condensed droplets from solid surfaces at the smallest sizes possible is vital for applications such as antifogging/frosting and heat transfer. For instance, if droplets uniformly jump at sizes smaller than visible light wavelengths of 400-720 nm, antifogging issues could be resolved. In comparison, the smallest droplets experimentally observed so far to jump uniformly were around 16 mu m in radius. Here, we show molecular dynamics (MD) simulations of persistent droplet jumping with a uniform radius down to only 3.6 nm on superhydrophobic thin-walled lattice (TWL) nanostructures integrated with superhydrophilic nanospots. The size cutoff is attributed to the preferential cross-lattice coalescence of island droplets. As an application, the MD results exhibit a 10x boost in the heat transfer coefficient (HTC), showing a -1 scaling law with the maximum droplet radius. We provide phase diagrams for jumping and wetting behaviors to guide the design of lattice structures with advanced antidew performance.
Impingement of binary nanodroplets on rough surfaces: a molecular dynamics study

Yibing Xue,Haichao Wang,Shuaichang Huang,Xiaoye Bie,Gang Wang,Ming Fang

DOI: https://doi.org/10.1038/s41598-024-69986-0

IF: 4.6

2024-08-19

Scientific Reports

Abstract:Roughness or texture endow the solid surface with the ability of some particular property of water repellency that has been employed in a variety of practical applications, including self-cleaning, icing-resistant, and so forth. However, the understanding of the dynamic evolution of impacting binary droplets on rough surfaces is not satisfactory, especially at the nanoscale. In this work, we investigate the impact process of the binary droplet system, a suspending droplet impacts a sessile one deposited on hydrophobic textured surfaces, via molecular dynamics (MD) simulations. Dynamic evolutions from MD simulations under various impact conditions are discussed, including coalescence, spreading, retraction and vibration, and bouncing. The free energy variation during the impacting process is calculated to reveal the mechanisms behind the impact dynamics. The effect of the surface texture on the spreading and retraction is investigated, and the corresponding maximum spreading diameter is also discussed. Finally, we investigate the effect of the surface texture on bouncing behavior, which is found to promote the droplet bouncing at low We range but suppress the bouncing behavior at high We range.

multidisciplinary sciences
Steerable directional bouncing and contact time reduction of impacting droplets on superhydrophobic stepped surfaces

Jiayu Du,Yanzhi Li,Xinxin Wu,Qi Min

DOI: https://doi.org/10.1016/j.jcis.2022.09.038

Abstract:Hypothesis: The unbalanced capillary force provided by wettability patterns, non-uniform/asymmetric microtextures enables directional droplet transport, while macrotextures have shown potentials in reducing the contact time. Inspired by these findings, we design millimeter superhydrophobic stepped surfaces to simultaneously achieve highly steerable directional bouncing and contact time reduction of impacting droplets. Experiments: The stepped surfaces are fabricated by computerized numerical control, chemical oxidation, hydrophobic treatment. Systematic impact experiments are conducted under Weber number ranging from 10.5 to 20.5, two step heights (0.5 mm and 1.0 mm) and extensive impact positions. Findings: Compared with known microtextured surfaces, the stepped surfaces exhibit excellent performance with the maximum lateral movement distance about 8 times of droplet radius, controllable rebound angle ranging from ∼ 32° to ∼ 90° and up to ∼ 30 % reduction in contact time. Particularly, we divide the directional bouncing characteristics into six regimes and attribute the variation of rebound velocity by the synergistic effects of viscous dissipation, excess surface energy, excess kinetic energy. It is demonstrated that the contact time is reduced by liquid mass redistribution and asymmetry enhancement. Predictive models of contact time that incorporate the coupling effects of impact position, impact velocity and step height are also established.
Bouncing dynamics of nanodroplets impacting superhydrophobic surfaces: The coupling influence of wetting transitions and scale effects

Ben-Xi Zhang,Zhi-Hui Cai,Quan Ding,Kai-Qi Zhu,Yan-Ru Yang,Xiao-Dong Wang

DOI: https://doi.org/10.1016/j.colsurfa.2022.130579

2022-11-16

Abstract:When nanodroplets rebound from nanopillar-arrayed superhydrophobic surfaces, the coupling influence of wetting transitions and scale effects on the bouncing dynamics is for the first time investigated via molecular dynamics (MD) simulations. The simulation results show that two bouncing patterns, the Cassie state bouncing and the Wenzel state bouncing, are always observed on nanopillar-arrayed superhydrophobic surfaces in a wide range of We =1.5-95 as the coupling influence is changed by various aspect ratios and surface wettability. At same Weber number, the contact time of the Cassie state bouncing is constant, but that of the Wenzel state bouncing being increased with the increased aspect ratio. However, the contact time is always increased with the increased surface wettability regardless of the bouncing pattern. Based on that, scaling laws of contact time are eventually established for these two bouncing patterns, respectively.

chemistry, physical
Pancake bouncing of impacting nanodroplets on smooth and nanopillared surfaces

Qiang Ma,Yi-Feng Wang,Chuan-Wei Wu,Yan-Ru Yang,Shao-Fei Zheng,Tuan Tran,Xiao-Dong Wang

DOI: https://doi.org/10.1016/j.icheatmasstransfer.2024.108108

IF: 6.782

2024-09-26

International Communications in Heat and Mass Transfer

Abstract:Reducing the contact time of impacting droplets on solid surfaces has become a research focus due to its promising application prospects in self-cleaning, anti-erosion, and anti-icing. In this study, the pancake bouncing of nanodroplets is investigated through molecular dynamics simulations, achieving a remarkable reduction in contact time. Two distinct patterns of pancake bouncing are identified when nanodroplets impact smooth and nanopillared surfaces with different bouncing mechanisms. The first pancake bouncing pattern with holes on smooth surfaces is attributed to internal-flow collision induced by multiple retraction centers. The second pancake bouncing pattern on nanopillared surfaces results from the storage and release of sufficient surface energy due to liquid penetration and requires satisfying both the timescale and energy criterion. Subsequently, theoretical models for two criteria are developed, which promote two parameter groups (−( s 2 + 2 ws ) h ( w cos θ 0 ) −1 and We –1/3 Re –1/3 R 0 2 ) corresponding to the surface and droplet. Based on these two parameter groups, a phase diagram is established and indicates the triggering conditions for the second pancake bouncing patterns. Finally, it is further revealed that by increasing the pillar height from smooth to nanopillared surfaces, the bouncing regime is transformed from the first pancake bouncing pattern, regular bouncing, to the second pancake bouncing pattern.

thermodynamics,mechanics
Impact dynamics of droplets on the well-designed wrinkled surfaces: Enhancement of bounding ability

Tao Li

DOI: https://doi.org/10.1016/j.colsurfa.2023.131521

2023-04-27

Abstract:Designing the nanostructured substrates with efficiently executing self-cleaning functions such as anti-icing, anti-fogging, anti-flaming, and anti-corrosion is always a hot scientific research topic and plays an essential role in practical applications. Herein, a novel substrate decorated with wrinkled structures is investigated. Results show that it has a large improvement in the reduction of contact time compared with the smooth substrate, and could affect the critical velocity of transition between retraction rebound and non-reaction transition. Effects of geometrical parameters of the wrinkled structures on droplet rebounding ability are detailed discussed, such as angles, intervals, and arrangement gradient. Most importantly, a well-designed substrate decorated with wrinkled structures and two confinement walls is proposed, which is found that the contact time could be largely reduced due to the limitation of spreading behaviors of the impacting droplets resulting from the heavy restriction effect of the confined walls. The findings of this work are expected to provide potential implications for many multidisciplinary fields, such as aerospace engineering, industrial manufacturing, interfacial heat transfer, environment, energy storage, and so forth.

chemistry, physical
Numerical investigation of air cushioning in the impact of micro-droplet under electrostatic fields

Yu Tian,Linsen Di,Wuxing Lai,Yin Guan,Weiwei Deng,YongAn Huang

DOI: https://doi.org/10.1063/5.0134281

IF: 3.5

2023-01-09

Physics Today

Abstract:Air cushioning widely occurs when a droplet impacts onto a solid or fluid surface at low velocity, which is mediated by the lubrication pressure of a thin air layer. Such air cushioning phenomena for micro-sized droplets bear important implications for precision coating and inkjet printing. In this study, we investigate numerically the air cushioning in the micro-sized droplets of various sizes impacting on a solid surface based on the volume of fluid method as implemented in the OpenFOAM framework. We find that the critical impact speed for bouncing on the air cushion increases as the droplet radius decreases, while the Weber number remains in a narrow range from 1 to 4. The scaling law of the critical impact speed for bouncing is derived by balancing the lubrication pressure of the air cushion with the capillary pressure and droplet inertia. The impact mode transforms from bouncing to wetting with an electric field. A group of phase diagrams of the electric Bond number vs. the Weber number are presented for various droplet sizes. The diagrams are consistent with the scaling law of the critical electric field for the Wetting-without-bubble mode. The findings provide insights for applications based on micro-droplet deposition, such as inkjet/electrohydrodynamic printing and spray coating, to avoid the adverse effect of air cushioning or air entrapment.

physics, multidisciplinary
Droplet impact on nano-textured bumps: Topology effects

Shakeel Ahmad,Jiyun Zhao,Aamer Shahzad,Muhammad Nafees Mumtaz Qadri,Hui Tang

DOI: https://doi.org/10.1016/j.compfluid.2021.104844

2021-03-01

Abstract:<p>Using the lattice Boltzmann method (LBM), the dynamics of a single droplet impacting on desert-beetle inspired, super-hydrophobic, nano-textured bumps was numerically investigated. The focus was placed on the effects of post height, inter-post spacing, bump radius of curvature and impact velocity represented by the Weber number. Three droplet states after the impact were captured, i.e., the suspended Cassie state, the sticky Wenzel state and rebound. The interfaces among these states were then determined in parametric maps generated from the current study. Since the droplets in the Cassie state can be easily removed from the surface and thus favorable for water collection. The conditions satisfied for this state by the geometrical parameters and the Weber number were explored. The results showed that, at moderate impact speeds, droplets impacting on nano-textured bumps with sufficiently high posts or sufficiently small inter-post spacing were generally in the Cassie state and hence favorable for water collection. If these conditions are satisfied, the bump surface curvature only plays a marginal role.</p>

mechanics,computer science, interdisciplinary applications
Controllable Coalescence Dynamics of Nanodroplets on Textured Surfaces Decorated with Well-Designed Wrinkled Nanostructures: A Molecular Dynamics Study

Tao Li,Lishu Zhang,Hui Li

DOI: https://doi.org/10.1021/acs.langmuir.1c02052

IF: 3.9

2021-09-16

Langmuir

Abstract:The control of coalescence and motion of droplets play a significant role in advanced technology and our daily life, and one of the most important approaches is surface design. Here, the microtextured surfaces decorated with wrinkled substrates are designed and studied for coalescence behaviors. The simulation results show that the coalescence speed would be slower on such surfaces due to the downward movement of the droplets induced by the penetration of atoms into the grooves that delays their movement along the coalescence direction, which is considered as a restriction effect. With the increase of the angles and the interval distance of wrinkled structures, the coalescence time becomes longer and the coalescing process becomes unfavorable, resulting from the enhanced restriction effect. More importantly, a composite substrate possessing the original and sub-wrinkled structures has been designed to tune the coalescence dynamics. The results of this work may not only help shed light on understanding the coalescence behaviors on the wrinkled substrates but also propose a feasible method for controlling the liquid coalescence behavior, which is expected to provide some useful implications for practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.1c02052.Reason for using liquid films rather than liquid droplets as the original coalescing model and quantitative relationship between the number of penetrating atoms and the coalescence time (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science
Ring-bouncing induced by the head-on impact of two nanodroplets on superhydrophobic surfaces

Qiang Ma,Yi-Feng Wang,Yi-Bo Wang,Shao-Fei Zheng,Yan-Ru Yang,Duu-Jong Lee,Xiao-Dong Wang

DOI: https://doi.org/10.1063/5.0142401

IF: 4.6

2023-04-16

Physics of Fluids

Abstract:Efficient droplet shedding from surfaces is fundamentally interesting and important due to its promising potential in numerous applications, such as anti-erosion, anti-icing, and self-cleaning. In this work, the bouncing dynamics of the head-on impact of two nanodroplets on superhydrophobic surfaces are investigated through molecular dynamics simulations. Three bouncing patterns, including regular-coalescence-bouncing, coalescence-hole-bouncing, and ring-bouncing, are identified at a wide range of impacting Weber numbers. For three bouncing patterns, the time evolutions of the spreading factors and the vertical velocity components are employed to analyze the particular dynamic behaviors and elucidate the underlying physics. As a counter-intuitive bouncing pattern, the ring-bouncing that two impact nanodroplets coalesce, spread, and then leave the surface in a ring shape without retracting exhibits a remarkable reduction in contact time by up to 60%. Considering four typical states for the ring-bouncing pattern, the comparison of the velocity distribution within the droplet clearly reveals that the ring-shaped droplet reshapes interfaces, which leads to a special hydrodynamics distribution. As a result, the internal flows at the inner and outer edges along the opposite direction collide with each other, leading to a sudden increase in the upward velocity. Combining the largely decreased contact area between solid and liquid with the small surface adhesion, the ring-shaped droplet rapidly bounces off the surface at the maximum spreading state. Finally, it is significantly highlighted that the ring-bouncing pattern offers a new avenue to break the contact time limit for efficient droplet shedding.

mechanics,physics, fluids & plasmas
Spreading dynamics of microdroplets on nanostructured surfaces

Xiong Wang,Xiao Yan,Jiayu Du,Bingqiang Ji,Mohammad Jalal Inanlu,Qi Min,Nenad Miljkovic

DOI: https://doi.org/10.1016/j.jcis.2022.12.107

IF: 9.9

2023-01-02

Journal of Colloid and Interface Science

Abstract:Hypothesis Droplet spreading governs various daily phenomena and industrial processes. Insights about microdroplet spreading are limited due to experimental difficulties arising from microdroplet manipulation and substrate wettability control. For droplet sizes approaching the capillary length scale, the gravitational force plays an important role in spreading. In contrast, capillary and viscous forces dominate as the droplet size reduces to smaller length scales. We hypothesize that the dynamic spreading behavior of microdroplets whose radius is far lower than the capillary length differs substantially from established and well understood dynamics. Experiments To systematically investigate the spreading dynamics of microdroplets, we develop contact-initiated wetting techniques combined with structuring-independent wettability control to achieve microdroplet (<500 μm) spreading on arbitrary surfaces while eliminating parasitic pinning effects (pining force ∼ 0) and initial impact momentum effects (Weber number ∼ 0). Findings Our experiments reveal that the capillary-driven initial spreading of microdroplets is shorter, with significantly reduced oscillation dampening, when compared to millimeter-scale droplets. Furthermore, spreading along with capillary wave propagation results in coupling between the spreading velocity and dynamic contact angle at the contact line. These findings, along with our proposed microdroplet manipulation platform, may find application in microscale heat transfer, advanced manufacturing, and aerosol transmission studies.

chemistry, physical
Regulating droplet impact dynamics of nanoparticle suspension: Phenomena, mechanisms, and implications

A Hubao,Hao Cao,Ran Hu,Yi-Feng Chen,Chengqun Gui,Zhibing Yang,Hubao A

DOI: https://doi.org/10.1063/5.0181743

IF: 4.6

2024-01-01

Physics of Fluids

Abstract:Droplet impact on solid substrates is a ubiquitous phenomenon in nature, agriculture, and industrial processes, playing a crucial role in numerous applications including self-cleaning, pesticide utilization, and inkjet printing. As a promising technique, adding nanoparticles into simple fluids to form nanofluids can effectively manipulate droplet impact behaviors. However, a comprehensive understanding of how nanoparticles modify the droplet impact dynamics, especially on the nanoscale, is still far from being fully explored. Hence, in this work, through the combined effort of molecular dynamics simulations and theoretical analysis, we elaborate on the influences of nanoparticles on droplet impact process. Using simple droplets as a control, we summarize four typical droplet impact modes and reveal how nanoparticles alter the impact behaviors of droplets, taking into account the key parameters including substrate wettability, impact velocity, volume fraction, and mass fraction of nanoparticles. We also demonstrate that with appropriate modifications, the theoretical/empirical models to predict the maximum contact diameter and the occurrence of breakup for simple droplets still hold to predict those of nanofluid droplets. Our findings and results enhance the understanding of the impact of nanoparticles on the droplet impact dynamics, with promising possibilities for various applications where regulating droplet impact behaviors is desired.

mechanics,physics, fluids & plasmas
Re-touch rebound patterns and contact time for a droplet impacting a superhydrophobic cylinder

Ling-Zhe Zhang,Yi-Bo Wang,Shu-Rong Gao,Dian-Ji Lin,Yan-Ru Yang,Xiao-Dong Wang,Duu-Jong Lee

DOI: https://doi.org/10.1016/j.jtice.2021.07.012

IF: 5.477

2021-09-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Droplet rebound dynamics from a superhydrophobic cylinder was studied numerically.Contact time differs from that on a flat surface, increases once re-touch takes place.Dependence of rebound patterns and τc are characterized and discussed.Power-law correlations of τc vs α are developed for bouncing.Method is proposed to suppress and prevent the re-touch.Droplet impact on a superhydrophobic cylinder differs from that on a flat surface. After bouncing, once re-touch takes place, the contact time τc would increase, which is unfavorable for some applications. The increased τc may strongly depend on the Weber number and radius ratio, R*, of cylinder to droplet.The impact is investigated via lattice Boltzmann method simulations. The particular emphasis is placed on re-touch rebound patterns and τc.Rebound patterns and τc both strongly depend on a combined parameter, α=We/R*, characterizing the asymmetry of droplet spreading and retraction. As α increases, upward rebound and stretched breakup take place sequentially for the first bouncing, whereas rebound patterns change as intact re-touch rebound and separate re-touch rebound for the second bouncing. Increasing α enhances the asymmetry, which promotes the first rebound, thereby reducing τc regardless of rebound patterns. The enhanced asymmetry also accelerates rebound and thus reduces τc in the separate re-touch rebound regime, whereas it hinders rebound, leading to a significantly increased τc. The power-law correlations of τc vs α are developed for the first and second bouncing. Besides, a method is proposed to suppress or prevent the re-touch, which is proven to effectively reduce τc.Download : Download high-res image (155KB)Download : Download full-size image

engineering, chemical

Compact nanoscale textures reduce contact time of bouncing droplets

Theoretical and Experimental Studies on the Controllable Pancake Bouncing Behavior of Droplets.

Droplet Jumping: Effects of Droplet Size, Surface Structure, Pinning, and Liquid Properties.

Nanodroplet impacts on hydrophobic/superhydrophobic surfaces with point textures

Numerical study on the bouncing dynamics of droplets impacting on a macro-textured superhydrophobic surface

Self‐Adaptive Droplet Bouncing on a Dual Gradient Surface

Dynamic Control of Droplet Jumping by Tailoring Nanoparticle Concentrations

Reducing the contact time of a bouncing drop

Uniform and Persistent Jumping Detachment of Condensed Nanodroplets.

Impingement of binary nanodroplets on rough surfaces: a molecular dynamics study

Steerable directional bouncing and contact time reduction of impacting droplets on superhydrophobic stepped surfaces

Bouncing dynamics of nanodroplets impacting superhydrophobic surfaces: The coupling influence of wetting transitions and scale effects

Pancake bouncing of impacting nanodroplets on smooth and nanopillared surfaces

Impact dynamics of droplets on the well-designed wrinkled surfaces: Enhancement of bounding ability

Numerical investigation of air cushioning in the impact of micro-droplet under electrostatic fields

Droplet impact on nano-textured bumps: Topology effects

Controllable Coalescence Dynamics of Nanodroplets on Textured Surfaces Decorated with Well-Designed Wrinkled Nanostructures: A Molecular Dynamics Study

Ring-bouncing induced by the head-on impact of two nanodroplets on superhydrophobic surfaces

Spreading dynamics of microdroplets on nanostructured surfaces

Regulating droplet impact dynamics of nanoparticle suspension: Phenomena, mechanisms, and implications

Re-touch rebound patterns and contact time for a droplet impacting a superhydrophobic cylinder