Abstract:Thermal conductive shape‐stabilized composite phase change materials (PCMs) were produced using polyacrylic acid (PAA), dodecanol (DDA) and carbon nanofiber (CNF) by solution blending route. In the composites, DDA was used as the material with latent heat thermal energy storage (LHTES) capability and PAA was introduced as the main supporter and shape stabilizer material for DDA. CNF was employed for two reasons: (i) to enrich the heat‐storing/releasing rate of the polymer‐based composite as the conductive nanofillers and (ii) to contribute to increasing the DDA adsorption rate in the shape‐stabilized composites. In this regard, a series of LHTES materials were presented, comprising of PAA/DDA composite, and PAA/DDA composite PCMs doped with CNF of 4 and 10 wt%. Composite PCMs exhibited well shape stabilization performance even with a high amount of DDA (70 wt%) due to both the cross‐linked spatial structure of PAA and the uniform dispersion of CNF in the composite. Fourier transform infrared spectroscopy and X‐ray diffraction findings indicated that there was no chemical bonding in PAA/DDA or PAA/DDA/CNF composites. DSC analysis revealed the highly favourable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite, melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. The thermal gravimetric analysis results showed that this composite had excellent thermal resistance to mass degradation up to 125°C. Thermal conductivity measurements indicated the significant effect of the CNF doping on the increment of the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings. DSC analysis revealed the highly favorable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite as melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. PAA/DDA(70 wt%)/CNF(10 wt%) composite had an excellent thermal resistance. CNF doping lead to a significant increment in the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings.

Shape-stabilized porous activated carbon/n-eicosane as a potential material for smart leather fabrication

Harnessing leather waste in polymer matrix for sustainable smart shape‐stable phase change materials

Innovative flexible thermal storage textile using nanocomposite shape-stabilized phase change materials

Hazelnut shell-based activated carbon/carbon nanotubes/palmityl alcohol as new form-stable phase change material with enhanced energy storage capacity and thermal conductivity

Utilization of waste apricot kernel shell derived-activated carbon as carrier framework for effective shape-stabilization and thermal conductivity enhancement of organic phase change materials used for thermal energy storage

Preparation and characterization of shape-stable bio-based composite phase change materials for thermal energy storage: coconut oil / activated carbon from cherry stones doped composites

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Shape-stabilized phase change composites supported by biomass loofah sponge-derived microtubular carbon scaffold toward thermal energy storage and electric-to-thermal conversion

Solvent-Assisted Nanochannel Encapsulation of a Natural Phase Change Material in Polystyrene Hollow Fibers for High-Performance Thermal Energy Storage

Palm Kernel Shell Activated Carbon as an Inorganic Framework for Shape-Stabilized Phase Change Material

Electrospun Polyethylene Glycol/Polyvinyl Alcohol Composite Nanofibrous Membranes as Shape-Stabilized Solid–Solid Phase Change Materials

Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Shape stabilization, thermal energy storage behavior and thermal conductivity enhancement of flexible paraffin/MWCNTs/PP hollow fiber membrane composite phase change materials

Preparation and performance of phase change thermoregulating fabric with high heat storage density via spray coating

Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape‐stabilized composite phase change materials

Enhanced thermoregulation performance of knitted fabrics using phase change material incorporated thermoplastic polyurethane and cellulose acetate nanofibers

Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage

N-octanoic acid-based phase change composites synthesized by absorption polymerization for efficient thermal energy storage

Form-Stable phase change composites based on porous carbon derived from polyacrylonitrile hydrogel

Exploring the Thermal Potential of Shape Stabilized Graphene Nano Platelets Enhanced Phase Change Material for Thermal Energy Storage