Abstract:Thermal conductive shape‐stabilized composite phase change materials (PCMs) were produced using polyacrylic acid (PAA), dodecanol (DDA) and carbon nanofiber (CNF) by solution blending route. In the composites, DDA was used as the material with latent heat thermal energy storage (LHTES) capability and PAA was introduced as the main supporter and shape stabilizer material for DDA. CNF was employed for two reasons: (i) to enrich the heat‐storing/releasing rate of the polymer‐based composite as the conductive nanofillers and (ii) to contribute to increasing the DDA adsorption rate in the shape‐stabilized composites. In this regard, a series of LHTES materials were presented, comprising of PAA/DDA composite, and PAA/DDA composite PCMs doped with CNF of 4 and 10 wt%. Composite PCMs exhibited well shape stabilization performance even with a high amount of DDA (70 wt%) due to both the cross‐linked spatial structure of PAA and the uniform dispersion of CNF in the composite. Fourier transform infrared spectroscopy and X‐ray diffraction findings indicated that there was no chemical bonding in PAA/DDA or PAA/DDA/CNF composites. DSC analysis revealed the highly favourable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite, melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. The thermal gravimetric analysis results showed that this composite had excellent thermal resistance to mass degradation up to 125°C. Thermal conductivity measurements indicated the significant effect of the CNF doping on the increment of the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings. DSC analysis revealed the highly favorable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite as melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. PAA/DDA(70 wt%)/CNF(10 wt%) composite had an excellent thermal resistance. CNF doping lead to a significant increment in the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings.

Preparation and characterization of shape-stable bio-based composite phase change materials for thermal energy storage: coconut oil / activated carbon from cherry stones doped composites

Valorization of Coconut Peat to Develop a Novel Shape-Stabilized Phase Change Material for Thermal Energy Storage

Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Preparation and Properties of Paraffin/PMMA Shape-stabilized Phase Change Material for Building Thermal Energy Storage

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Enhanced Thermal Performance of Form-Stable Composite Phase-Change Materials Supported by Novel Porous Carbon Spheres for Thermal Energy Storage

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Preparation and Thermal Properties of Palmitic Acid/expanded Graphite/carbon Fiber Composite Phase Change Materials for Thermal Energy Storage

Preparation and thermal properties of heterogeneous composite phase change materials based on camphene–palmitic acid

Utilization of waste apricot kernel shell derived-activated carbon as carrier framework for effective shape-stabilization and thermal conductivity enhancement of organic phase change materials used for thermal energy storage

Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape‐stabilized composite phase change materials

Preparation and Properties of Shape-Stabilized Phase Change Materials Based on Fatty Acid Eutectics and Cellulose Composites for Thermal Energy Storage

Evaluation of shape-stabilized phase-change materials using calcium carbonate-based starfish microporous materials for thermal energy storage

Hazelnut shell-based activated carbon/carbon nanotubes/palmityl alcohol as new form-stable phase change material with enhanced energy storage capacity and thermal conductivity

High internal phase emulsion templated-polystyrene/carbon nano fiber/hexadecanol composites phase change materials for thermal management applications

Preparation and Performance of Shape Stabilized Phase Change Thermal Storage Materials with High Thermal Conductivity

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Improving the Heat Transfer of Phase Change Composites for Thermal Energy Storage by Adding Copper: Preparation and Thermal Properties